Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC C O 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹33.2 L+₹6.8 L (25.6%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹33.5 L+₹7.1 L (26.7%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹34.7 L+₹8.3 L (31.2%)Rejected-Finance VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L4 | Rejected-Finance Being not lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) PATHANKOT
GE (WEST) PATHANKOT
PETTY REPAIR TO MD OTM ACCN IN AOR OF AGE BR-I OF GE (WEST) PATHANKOT
2022_MES_559860_1
GE/PKT-49/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE (WEST) PATHANKOT
Please refer tender documents
9 documents required · 9 mandatory
₹500
Yes
GE (WEST) PATHANKOT
₹80,000
Yes
4 Jan 2023
26 Oct 2022
26 Nov 2022
26 Oct 2022
24 Nov 2022
10 Nov 2022
27 Oct 2022 - 8 Nov 2022
Amount
Cleaning and removing all scale and dirt etc from PVC/RCC tanks and from mouths of circulating pipes etc of capacity of tank exc 250 ltrs but not exe 500 ltrs including dismantling and re-fixing if required at site and writing date of cleaning with synthetic enamel paint 100 mm height in DD/MM/YY pattern complete all as specified and directed
All as per srl item no 1.00 above but capacity of tank exc 500 not exe 1000 ltrs
S&F in repairs suitable brass spindle, disk & washer (Min weight 75 Grams) for 15mm dia CP brass stop cock/bib cock/pillar cock/angle valve/concealed stop valve etc complete all as specified and directed.
All as per srl item no 3.00 above but for CP brass of any type mixer as basin, sink & wall mixer etc complete all as specified and directed.
Cleaning & removing of air lock in 15mm bore (Gl) steel water tubes by opening of outlet/inlet and making the water supply available upto all outlet including taking down (if required) and re-fixing the same complete all as specified and directed.
All as per srl item no 5.00 above but 20mm bore (Gl) steel water tubes
M&L for replacement of GI socket 15mm bore medium grade complete all as specified and directed. Note: Cost of taking down GI tubing for replacement of worn out/defective GI fitting & re-fixing thereafter is included in the rates quoted by the contractor
All as per srl item no 7.00 above but GI reducer socket 20mm x15 mm
All as per srl item no 7.00 but GI reducer bend 15mmx20mm bore medium grade
All as per srl item no 7.00 above but GI elbow 15 mm dia.
All as per srl item no 7.00 above but GI nipple 15 x 50mm
All as per srl item no 7.00 above but GI nipple 15 x 100mm
All as per srl item no 7.00 above but GI nipple 15 mm dia for tank.
All as per srl item no 7.00 above but GI union coupling 15 mm dia
All as per srl item no 7.00 above but GI tee 15 mm dia.
All as per srl item no 7.00 above but GI reducer tee 20mm x15 mm dia
M&L for replacement of GI socket 20mm bore medium grade complete all as specified and directed. Note: Cost of taking down GI tubing for replacement of worn out/defective GI fitting & re-fixing thereafter is included in the rates quoted by the contractor
All as per srl item no 17.00 above but GI elbow 20 mm dia.
All as per srl item no 17.00 above but GI nipple 20 x 50mm
All as per srl item no 17.00 above but GI nipple 20 x 100mm
All as per srl item no 17.00 above but GI nipple 20 mm dia for tank.
All as per srl item no 17.00 above but GI union 20 mm dia.
All as per srl item no 17.00 above but GI tee 20 mm dia.
S & F in repair 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm complete all as specified and directed.
S & F in repair 40mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm complete all as specified and directed.
S & F in repair for 15mm dia PVC connections 600mm long with PTMT nuts complete all as specified and as directed.
S & F in repair for 125mm dia chromium plated grating with hole/without hole for waste pipe complete all as specified and directed.
M & L in repair 32mm bore waste fittings (coupling), brass, chromium plated for stainless steel sinks, basins, urinal etc with long screwed shanks and fly-nuts complete all as specified and directed.
M & L in repair 50mm bore waste fittings (coupling), brass, chromium plated for stainless steel sinks, basins, urinal etc with long screwed shanks and fly-nuts complete all as specified and directed.
M & L in repair 40mm bore waste fittings (coupling), brass, chromium plated for stainless steel sinks, basins, urinal etc with long screwed shanks and fly-nuts complete all as specified and directed.
S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed (min. weight 20mm-210 gms) complete all as specified and directed.
S & F in repair PVC overhead tank cover/lid of size suitable for capacity of tank 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed.
S & F in repair 32mm bore PVC flush pipes/bend in suitable length to connection between vitreous China squatting pan, ‘Orissa’ pattern & PVC flushing cistern including all joints and making good to the floor complete all as specified
All as per srl item no 33.00 above but for vitreous China wash down water closet pan (pedestal pattern)
S & F in repair for 75mm PVC floor trap with grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
S & F in repair PVC Syphon assembly/internal kit complete set for single Piece-WC with combined flush tank, Twin/single Flush system complete all as specified and directed
S & F in repair PVC Syphon assembly/internal kit complete set of low level cistern complete all as specified and directed
S & F in repair Plastic water closet seat, any coloure, closed pattern with flat/recessed bottom, & cover & mild steel CP or aluminized hinging device complete all as specified and as directed.
S & F in repair Bathroom cabinet Mirror size 622mmX422 mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
S&F in repair for 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified and directed.
S&F in repair for brass chromium plated long body bib cock with wall Flange complete all as specified and directed. Make-Jaquar cat no CON-CHR-107KN or equivalent in any of the make mentioned in list of product.
S & F in repair for Bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed.
S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (minimum weight 960 grams) complete all as specified and directed.
S & F in repair for Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms) complete all as specified and directed.
S&F in repair 15mm bore fancy type, chromium plated Stop valves /angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed.
S&F in repair for 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type),cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S & F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for WHB, bath Wall mixer & sink mixer complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs Wall Flange (without Hand and Overhead Shower) Make :Jaquar Queen's QQT-CHR-7281 or equivalent in any of the make mentioned in list of product.
S&F in repair for CP hand shower 100mm dia round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system. Make : HSH -CHR-1937 of JAQUAR or equivalent in any of the make mentioned in list of product.
S&F in repair for CP flexible shower tube 8mm dia & 1.5 m long with nuts. Make : SHA-CHR -549D8 of JAQUAR or equivalent in any of the make mentioned in list of product.
S&F in repair for premium wall bracket for hand shower, 35mm dia & 100mm long round shape. Make: SHA-CHR -555 of JAQUAR or equivalent in any of the make mentioned in list of product.
S&F in repair for CP overhead Shower 190mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified.
S & F in repair of wall mounted shower arms casted 190mm long light body round shape with flange complete all as specified and as directed.
S&F in repair Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
S & F in repair for Swivel shower of PTMT any colour for fixing with 15mm pipe (min. weight 40gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour. (min. weight 40 gms) complete all as specified and directed.
S & F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
S&F in repair for CP Corner Glass Shelf (with Bracket) with fixing arrangement complete all as specified and as directed.
S&F in repair for Brass chromium plated Toilet paper Roll Holder with fixing arrangement complete all as specified and as directed.
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S & F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair for chromium plated Towel Rack 600mm Long with Lower Hangers with fixing arrangement complete all as specified and as directed.
S&F in repair for chromium plated Towel Ring Round minimum dia 200mm with fixing arrangement complete all as specified and as directed.
S&F in repairs 15mm dia CP Health faucet with flexible pipe not less than 90 cm long fixed to EWC suitable complete all as specified and directed at site
S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.
S & F in repair for Brass CP Urinal spreader 15mm dia pipe complete all as specified
S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
M&L for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size, quality or description from wooden,steel frames upto tripple story building complete all as specified and directed.
All as per srl item no 68.00 above but area exc 0.5 sqm in each pane
M&L for 4mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size, quality or description from wooden,steel frames upto tripple story building complete all as specified and directed.
M&L in repair 09mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.
Taking down wooden/PVC shutter of any description area exc 1 sqm above but not exc 2 sqm each & resecuring, easing, adjusting ,changing the place of hinges if required with welding or with self-driving screws and re-fixing in same opening complete
All as per srl item no 72.00 above but area not exc 1 sqm each
Taking down any type of aluminum shutter such of door, window, Ventilator etc area not exc 3.0 Sqm each including replacement of joining cleats, glazing clips, rubber neoprene packing, anodised aluminum snap beading, screws etc and refixing in same opening complete all as specified and directed.
S&F in repair Door cill powder coated aluminum brush type polypropylene screwed down to shutters complete all as specified and directed.
S &F in repair Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm including taking down& re-fixing shutter complete all as specified and directed.
S & F in repairs 25mm outer dia stainless steel bright finished ,fancy type decorative drapery rod of thickness 20 gauge with ends caps in (pair) fixed to wall with all necessary fixing arrangement complete all as specified and directed
S&F in repairs heavy duty stainless steel bright finished ,fancy type decorative brackets fixed with PVC plug/gutty & screws etc complete all as specified and directed.
M&L for Welding in repairs exc 2.5cm but n exc 5cm in length & thickness of metal to be welded exc Exc 09 mm but n exc 20mm complete all as directed.
M&L in repairs for Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminum (Die cast) body complete all as specified and directed.
M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as directed.
S & F for in repair for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S &F in repair 125mm long ,aluminum anodised Hasp and staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F in repair 100mm long butt hinges medium weight cold rolled mild steel fixed with screws or welding including taking down shutter and refixing shutter in to the same opening complete all as specified and directed
S & F in repair 250mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S & F in repair Aluminum alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.
S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames as required at site complete all as specified and directed.
S &F in repair 200mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed complete all as specified and directed.
S &F in repair 200mm long aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F in repair 150mm long Mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.
S & F in repair 150mm long extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair 140mm long Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repair peg set of 05 Pin Stainless Steel fancy type, superior quality and fixed complete all as specified and directed.
S & F in repair 20mm bore Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed including taking down & refixing old GI pipe complete all as specified and as directed.
Taking up or down 15mm bore, steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed.
All as per srl item no. 95.00 above but 20 mm bore.
S & F 15mm bore Steel water tubing, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified
All as per srl item no 97.00 above but 20 mm bore.
Demolition and breaking up 75/100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including earthwork complete all as specified.
S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed.
All as per srl item no 100.00 above but 110mm bore.
Taking down 75/100mm bore eaves gutter and rain water pipe any size any pattern, PVC/ AC pipe including all fittings complete all as specified and directed.
S&F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
All as per srl item no 103.00 above but 110mm bore.
S&F for PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed.
S&F for PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed.
Grinding with machine grinder of granite stone, terrazzo topping with marble aggregate, marble Stone slab, kota slab etc. as in old floor, wall, cooking platform, shelf etc & polishing complete all as specified and directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old Brocken water tanks etc complete all as specified and directed.
All as per srl item no 109.00 above but water storage tanks of 1000 ltrs capacity
S & F in repair for sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.
All as per srl item no 111.00 above but overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S & F in repair for 01mm thick Stainless steel plate rack(Utensil Rack) of size (900mm x 750mm) fixed to wall with and including nuts & bolts of suitable size for fixing in wall complete all as specified and directed.
All as per srl item no 113.00 above but size (750mm x 600mm)
S & F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.
S & F in repair for Cera Cruse One Piece EWC S Concealed with Soft Close Seat Cover and Twin Flush Fittings 300 mm (710 L x 370 W x 770 H) mm Type One Piece Toilet S-Trap, Colour Snow White, Finish Gloss Finish Material Ceramic complete all as specified and directed. Make : Model No. S1012135 of Cera or equivalent in any of the make mentioned in list of product.
S & F in repair for vitreous China squatting pan, ‘Orissa ’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.
S&F in repair for Vitreous China wash basin, white or in matching colour of tiles, flat back, size 550x400mm including brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 800 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.
S & F in repair for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with Intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.
S&F in repair for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe ,white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including flush pipe and waste pipe complete all as specified and as directed.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete
M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
All as per srl item no 122.00 above but on other than fair faces
M&L for 10 mm thick rendering on brick work or concrete surfaces in CM 1:3 in ceiling finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
All as per srl item no 125.00 above but applying minimum 1.5mm thick white cement based wall care putty on wall surfaces & making smooth surface and applying two coat of distemper oil emulsion in any tint.
M & L for complete removal of existing treatment on of wall surface and applying two coat of Cement Base Paint over one coat of alkali resitant priming paint complete all as specified
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quions, wall, arches, pillars, man-holes, drain etc complete all as specified and directed.
M & L burnt clay brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .
M & L for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed
M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, kneelers, apex stones,bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M & L 35mm thick providing precast cement concrete louvers and jallies (measured solid) in 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate set in cement mortar 1:4, including dismantling old RCC jallies complete all as specified and as directed.
M & L for 100mm thick plain Cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base including demolition of old PCC complete all as specified and as directed.
M&L 40 mm thick plain cement concrete type B-1 , 1:2:4 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring including demolition of old PCC complete all as specified and directed.
M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including demolition of old PCC complete all as specified and as directed.
M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,, mitered/stopped ends etc complete all as specified and as directed.
Demolition of RCC of any description slab , shelves , chajjas, water tank ,chullah hoods etc and in any position including cutting reinforced as required complete all as specified and directed.
M & L for for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs for drain & manholes etc with plain faces set in cement mortar (1:4) complete all as specified and as directed.
M & L for Mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
M&L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling old tiling with cement mortar bedding complete all as specified and directed.
All as per srl item no 142.00 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4
M&L for Vitrified Ceramic tiles 10 mm thick light/Dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc (size of each tile 0.6m x 0.6m), set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling old tiling with cement mortar bedding complete all as specified and directed.
All as per srl item no 144.00 above but as in vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 .
M&L for Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling old tiling with cement mortar bedding complete all as specified and directed.
M&L 18-20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite & all open edges to be half rounded over including 15mm thick bedding layer in cement mortar 1:4 including dismantling of old stone slab etc complete all as specified and directed.
All as per srl item no 147.00 above but marble work 18 to 20mm thick of any colour.
M&L Non abrasive paving (rectified endura) cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15 mm thick screed bed in cement mortar 1:4 including demolition/dismantling old tiles complete all as specified and as directed.
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 sqm above but not exc 2 sqm each and removing from site complete all as specified and directed.
S & F Pressed steel frame size of frame 125 x 60 x1.25 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, back filling of hollow portion of frame including fixing of hold fast with plain cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate complete all as spd and directed
S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
All as per srl item No. 155 but wire gauzed ie.panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly.The quoted rate is included for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm.
S&F factory made 35mm thick of 2nd class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain ,chamfered or rounded. fitted with cut and mitered beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,kiln seasoned, chemically pressure treated complete all as specified and directed.
S&F Factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. Glazed and gauged shutter. Glazed shutter made out of hollow' section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10 mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, tarred hold fasts, PCC bed blocks for fixing hold fast, including plain/figured glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples`etc complete all as per details shown in drawing No CEPZ/C-TD/032/13 sheet No 1/2 & 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed
Dismantling timber scantling 40 Sq cm and over in section, in any position framed work complete all as specified and directed.
S & F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preparation of Surfaces & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified .
M&L for preparation of newly wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L 18/19mm thick Pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified
M & L 18mm thick Pre-laminated Medium density fibre board, exterior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood lipping fixed with screws to steel/timber frame work as in shutters & shelf of Kitchen cabinet, cupboard, partition & almirahs etc including taking down old shutters & shelf etc complete all as specified
S &F 125mm long ,aluminum anodised Hasp and staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F for Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm complete all as specified and directed.
S & F for butt hinges medium weight 100 mm cold rolled mild steel complete all as specified and directed..
S & F for Aluminum alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.
S & F for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames as required at site complete all as specified and directed.
S &F for aluminum, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed
S & F for Extruded aluminum alloy handles, fabricated type,anodised 150mm size complete all as specified and directed.
S & F 140mm long Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S &F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
S & F for anodised aluminum frame for partition / doors / windows / ventilators /sliding shutters etc with one or more rebates including joining cleat for fixing etc including taking down old frames with shutters complete all as specified and directed.
S & F Anodised aluminum door shutters ,aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.
S & F for Anodised aluminum window and ventilator shutters, fixed/sliding/rolling type without sash bar, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, handle, rolling wheal etc. complete all as specified and directed.
S & F Anodised aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S & F in repair Anodised aluminum grill (weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminum flat section of size 50 x 1.5 mm fixed to aluminium windows Complete all as specified and directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering from sunshades etc complete all as specified and directed.
S & F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sunshades ,roof covering, cladding to wall etc fixed with self-tapping screws complete all as specified and directed.
S & F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etc fixed with self-tapping screws complete all as specified and directed.
Dismantling of AC/fiber glass reinforced translucent corrugated or semi corrugated sheeting in roof including ridges from sunshades etc complete all as specified and directed.
M&L for for 6 mm thick fiber cement corrugated or semi-corrugated sheet in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.
All as per srl item no 185.00 above but except sheets.
Supply only 38 mm wide and 3 mm thick glass dividing strips in flooring by fixing in position and making square or rectagle for casting concrete in flooring complete all as specified and directed
S &F for rolled sections hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering, sun-shades etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.
S & F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, wind ties, cattle trap and similar work conforming to Fe.290.Gde-E-165,ornamental and intricate design complete all as spd and directed.
Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified and directed
S & F of Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. Note :- PVC frame shall be measured and paid for separately.
S & F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.
S & F for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) complete all as specified and directed.
M&L for preparation of newly steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators and sockets by unscrewing carefully from boards etc and making good disturbed surfaces of walls, as per existing finishes complete all as specified and directed.
M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per Srl No 196 here-in-before but for call Bell point complete all as specified and directed.
All as per srl item No 196 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.
All as per srl item No 196 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)
M & L for point wiring for light / fan controlled by one switch with 1.50 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistanded copper conductor FRLS as earth continuity conductor connected to common earth dolly in, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green).
All as per Srl No 201 here-in-before but for call Bell point complete all as specified and directed.
All as per srl item No 201 here-in-before but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.
All as per srl item No 201 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
M & L for point wiring with 2.50 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm single core PVC insulated unsheathed multistanded copper conductor FRLS as earth continuity conductor connected to common earth dolly in, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained.(Ph-Red, N-Black, Half -Yellow, Earth- Green).
M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit ISI maked heavy duty for one light fan/bell point controlled by one switch including Modular cover plate and modular metallic flush boxes of suitable way modular boxes and cover plates including PVC green insulated unsheathed 1.5 sqmm multistrand copper conductor FRLS cable as continous earthwire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)
All as per srl item No 206 here-in-before but MODULAR call Bell point complete all as specified and directed.
All as per srl item No 206 here-in-before but MODULAR 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per srl item No 206 here-in-before but MODULAR 3 pin 5 amps socket outlet on independent Board complete all as specified and directed.
All as per srl item No 206 here-in-before but MODULAR 15/16 Amps socket outlet on inependent board with 2.5 sqmm copper conducter FRLS cale and 2.5 sqmm PVC insulated unsheathed coper onductor cable FRLS (Green Colour) as earth lead complete all as specified and directed.
S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
S&F switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge..
S&F of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.
S & F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular switch 1 way 16A, 1 module complete all as specified and directed.
S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.
S & F of Modular Bell push 6A 1 module , complete all as specified and directed.
S & F of Modular Fan regulator 6A 1 module , complete all as specified and directed.
S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.
S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S & F in replacement of CFLs with LED Lamp, B22 type ,14 watt, complete all as specified and directed.
S & F in replacement energy saving decorative LED box type (4 Feet), frame , light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. Make of Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent in any of the make mentioned in list of products.
S & F energy saving Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light complete all as spd and directed. Make of LED Rod:- CROMPTON LTT8-20 or Technocommercially equivalent in any of the make mentioned in list of products.
Supply and Fixing in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge. Make :- Crompton Cat Part No:- LBHP-10-CDL or equvalent in any of the make mentioned in list of products.
M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S&F in replacement sleek LED Batten light fitting 4 feet long 1x22 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S & F in replacement of Decorative Gate Light Moon Opal made up of high Grade unbreakable polycarbonate material suitable for and including 12/20 Watt LED Bulb complete all as specified and directed. Make Havells :- Cat Part No:- LHFXBON1TN5Q020 or in any of the make mentioned in list of products.
S & F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .
S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 6 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
M & L for MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
M & L for MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.
All as per srl item No 241 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead.above but 4.00 Sqmm.
S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN series of Schenieder Cat Part No:- A9HVD04L or equivalent in any of the make mentioned in list of product . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.
S & F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. Make: CROMPTON CAT REF. LSTS-25-CDL or Technocommercially equivalent in any of the make mentioned in list of products.
M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Supply & Fixing in replacement of Socket outlet 2 in 1, 3 pin, 5A complete in existing circuit complete as directed.
Supply & Fixing in replacement switch piano flush button single pole one way 5 Amp 230 volts in existing circuit complete all as specified and directed.
Supply and Fixing in replacement of socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
Supply and Fixing in replacement of switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
Supplying & Fixing in replacement of Switch Bell push, flush type, 5 amp one way complete all as specified and directed.
S&F in replacement of Buzzer Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.
S & F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings in existing circuit complete all as specified and directed.
Supply and Fixing in replacement Gang Box 15 Amp Switch socket combined complete all as specified and directed.
Supply and Fixing in replacement Gang Box 5 Amp Switch socket combined complete all as specified and directed.
S&F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed.
S & F in Replacement of MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
S & F in Replacement of MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed.
S&F in replacement Hylum sheet 6x10 to 8x10 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed.
S&F LED luminaire 600mm x 600mm , 35/36 watt 220v AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & driver & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Note :- (For B/R portion complaints):-Contractor quoted rate are included for the followings:- 1:-Work against all items will be done in peace meal in small quantities on daily basis and no objection whatsoever will be entertained in this regard. Contractors to quote the rates accordingly. 2:-Contractor or his accredited representative will report to JE (Civil) for B/R complaints at 9.00 AM morning at complaint cell of AGE B/R - I Sub division in triveni Vihar complex on all working days to collect complaints Job Slip/Job Card from JE Civil and will submit at 05PM evening on same day status of complaints as completed along with BOQ item wise qty incorporated (Job slip/card duly signed by user) or complaints not completed to JE Civil. 3:- Contractor has to provide all necessary T&P, scaffolding, ladders, transport, Safety gears to his workers for smooth functioning of contract. 4:- Minor & Misc items i.e thread/Teflon tape/any kind of screws/nails required to attend the complaints shall be provided by contractor. 5:- Contractor or his accredited representative shall be available during attending of complaints. 6:- All complaint will be considered as rectified with entire satisfaction of Engineer-in-charge
7:- Complaint slips/job card books (as per format given by MES) in duplicate with machine made srl no and date etc for recording day to day complaints & complaint registers (as per format given by MES) will be provided by the contractor at his Own expense during currency of contract period. All Complaint slips/Job card books,qty consumption register, complaint registers always shall be kept with JE Civil in the complaint cell. 8:- Contractor /Rep will update the complaint register such as paste of duplicate job slips in books, summary of qty balance in r/o CA qty on daily basis as directed by Engr-in-Charge (complaint register to be kept in the complaint cell) 9:- Cleaning stains and dripping mortars from floors and walls etc. Removing, Washing, cleaning all splashes, drops, dirt from floors, wire mess, builder hardware’s ,glass panes, doors, windows, wardrobes, cupboards, Kitchen cabinet, almirahs etc any type of fixtures & fittings of B/R & E/M Items, furniture, wiring etc and leaving premises in a clean & tidy state. 10:- All straight, Raking, circular cutting & wastage etc of tiles & stone etc.
Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,95,144.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 3% (Three percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249
M/S Raghuvanshi Builders
Om Sai Ram Builders
KHOSLA ENGINEERS BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .