WELCOME MAINTENANCE OF JCOS AND ORS MD ACCN OF COD AND 506 ABW AND REPAIR OF JOINERY, ALUMINUM JOINERY, WALL PANELING ETC OF RESTRICTED AND UNRESTRICTED AREA OF 506 ABW UNDER AGE BR-II OF GE(EAST) JABALPUR

Amount

UNRESTRICTED AREA SCHEDULE

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

Material and labour for Glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L for ENDURA out door tiles 60 cm x 60 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in CM 1:6.

M& L Machine cut kota stone slab flooring 18-20 mm thick in riser of steps skirting dado in pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & 20 mm thick CM 1:6 screed bed complete.

M& L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20 mm thick CM 1:6 screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.

Machine cut Cudapph stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Moorum/red bajri, filling in floors or pavings, laid inlayers n exc any thickness spread, levelled and rammed including watering.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40Grade.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 50 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

M&L for PCC 1:3:6 type C-1 using 40 mm graded stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor finishes 100 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-Charge.

M&L100 mm thick PCC 1:4:8 type type D2 as in floors as sub base in patches all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4 (1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4and to be finished even and smooth without using extra cement complete all as specified and directed.

S&F 20 mm size of wire mesh netting of stainless stell wire 1.40 mm dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

M&L 10mm thick plaster in CM 1:3 finished even & smooth w/o using extra cement in patches all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M & L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of wallhan applying two coat pidilite product Dr Fixit Rain coat over one coat of primer seal complete as specified and directed.

M&L of old surface roof /terrace /ACC sheets/Manglore pattern exposed up to mother surface filled all cracks than applying three coat pidilite product Dr Fixit new over one coat primer seal complete as specified and directed.

M&L of old surface wall exposed up to mother surface filled all cracks than applying three coat pidilite product Dr fixit heat shield over one coat of primer seal complete in all respect as specified as directed.

M&L Polysulpide two material mix (rasin+hardner) appying harizontel and vertical surface surface (using gun for applying for filling ) crack filling and before appyling material must clean dust free and making V Groove complete as specified as directed.

Preparation of new decorated surfaces of walls and applying two coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.

Preparation of new plastered or un-plastered surface and applyingtwo coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

Supply only Integral waterproofing compound completed all as specication as direction (ISI Mark).

Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-Charge.

Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap chorime plate alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tappillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC bib taps all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps chorime plate alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair 20 mm bore stop valves chorime plate alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC stop valves all as specified and directed by Engr-in-Charge.

S&F in repair gun globe or gate valve for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-Charge.

All as per srl item No 64 here-in-before but suitable for 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F in repair gun metal half turn flush cock for 32mm bore pipe with iron wheel head, screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore concussive push button type self closing tap of cast copper alloy chromium plated screwed iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair self closing tap 15mm bore lift type of cast iron or malleable cast iron chromium plated screwed for pipes all as specified and directed by Engr-in-Charge.

S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore pipes all as specified and directed by Engr-in-Charge.

All as per srl item No 69 here-in-before but 25mm bore pipe all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge. Make:- Symet/ Prayag

All as per srl item No 71 here-in-before but length 600mm all as specified and directed by Engr-in-Charge.

S&F in repair 125 mm dia Brass chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-Charge.

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-charge. Make:- ZIM / Parko

All as per srl item No 74 here-in-before but 40mm dia for sinks all as specified and directed by Engr-in-Charge.

S&F in repair waste fitting suitable for stainless steel kitchen sink complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-Charge.

S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-24 fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-Charge.

S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-28 fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-Charge.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet,( code ALD 573 of Jaquar or equivalent)

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated Single handle sink mixer cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per srl item No 88 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

All as per srl item No 90 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

All as per srl item No 92 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per srl item No 95 here-in-before but 75mm bore complete all as specified and directed.

All as per srl item No 95 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Dismantling water tanks capacity n. exc 250 Ltr Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F rotational molded polyethylene water storage tanks white tripple layer (cylindrical vertical with closed top) capacity 250 Ltr hoisted and fixed in position all as specified and directed by Engr-in-Charge.

All as per srl item No 114 here-in-before but capacity 500 Ltr all as specified and directed by Engr-in-Charge.

All as per srl item No 114 here-in-before but 1000 Litre Capacity.

S&F in repair Sink Mixer, ( code CQT 23309 Jaquar or equivalent)

S&F in repair Towel Rail, ( code AQN 7711 of Jaquar or equivalent)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495 x 420mm with bowl size 410 x 330 x 160mm.

S&F stainless steel plate rack, 0.56mm thick of standard pattern, 31” x 36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified.

S&F in repair, HDPE water storage tank lid black (with arrangement for locking) for 500 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid black (with arrangement for locking) for 1000 litres capacity tank complete all as specified and directed.

S&F in repair, HDPE water storage tank lid black (with arrangement for locking for 5000 litres capacity tank complete all as specified and directed.

S&F in repair, chromium plated glass shelf of size 22" complete all as specified and directed. As per Cat No AQN-7771 of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'.

S&F in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent Make as approved by GE from Appendix 'C'.

S&F in repair Double coat Hook, ( code AQN 7761 of Jaquar or equivalent).

Brushing neat cement slurry with 3.0kg of cement per sq. metre.

S&F in 100 MM repair steel window handles with nuts & bolts or with screws complete all as specified and directed by Engr-in-Charge.

S&F in repair steel window peg stay all as specified and directed by Engr-in-Charge.

S&F in repair butt hinges 100mm size by welding to angle iron chowkhat all as specified and directed by Engr-in-Charge.

Supply and fixing solar control film 25 micron reflective type (gareware sun control or equivalent) all as specified and directed by Engr-in-Charge.

S & F Door Seal rubber etc, complete all as specified.

S&F 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S & F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F in repair Sheet glass 6.3 mm thick quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F Sheet glass10 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix figured glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

S&F in repair 18/19 mm thick water proof block board of commercial quality Gde-I fixed with screws as kitchen , cup board box and shutters & shelves etc all as specified and directed by Engr-in-Charge.

S&F 3 mm ordinary glass, type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkats or frames n exc1.5 sqm with shutter (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames).

Refixing of shutters of any description n exc 1.0 sqm each, in same opening all as specified and as directed.

Refixing of shutters of any description n exc 1.0 sqm but n exc 2.0 sqm each, in same opening all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete.

M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

Solid PVC Door Frame (Single rebated) of size 60mm x 30 mm made out of soild PVC Foam with homogenous fine celluar structure having smooth outer integral skin with 100x8 sheet metal CSK SCREWS complete all as specified and as shown on drawing(Note : door frame shall be water proof ,termite proof,elegant and should have excellent screws holding strenght to fixed hings and hld door properly for long life)

S&F, Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing.

S&F factory made plain framed ,40 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S & F Steel window with side hung shutters incl Box type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

S & F Steel window with side hung shutters incl Box type hinges with steel handle , steel peg stay, complete without glazing bars cooler type window, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

M&Lfor 12 mm thick in repair plywood grade BWR,type BB, Fixed with screws ro timber frame work,shelves etc all as specified.

Supply and fixing 0.90 mm thick decorative laminated type-I of surface finish colour and patten as approved ,fixed with approved adhesiva as manufacture.

S&F in repair telescopic wall -bearing shelf closing channels Chanel and ( exc 300mm n exc 500 mm ) as complete all as specified and directed.

S&F in repair Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F in repair Europa cupboard locks as complete all as specified and directed.

S&F 30 mm width of flaps Continous(piano)hinged, mild steel bright finish or electrogalvanised etc complete all as specified and direcated.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-Charge.

S&F in repair Aluminium anodised Butt hinges medium weight minium 100mm long complete.

All as per srl item No 163 here-in-before but 75mm long size complete.

S&F in repair 40 mm dia , brass cupboard knobs fixed with nut ,screw and washer of mild steel bright complete.

S&F in repair Aluminium anodised barrel tower bolts of extruded section 200mm long complete.

S&F in repair Aluminium anodised barrel tower bolts of extruded section 150mm long complete.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete.

S&F in repair Aluminium handles cast type anodised of 150mm complete.

S&F in repair Aluminium handles cast type anodised of 100mm complete.

S&F in repair Brass handles cast type anodised of 150mm complete.

S&Fin reapir Brass handles cast type anodised of 100mm complete.

S&F in repair mild steel pressed handles cast type anodised of 150mm complete.

S&F in repair mild steel pressed handles cast type anodised of 100mm complete.

S&F in repair Mortice lock,vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed.

S&F in repair Brass sliding door bolt with brass hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections orBrass of bolt 250mm complete all as specified and directed by Engr-in-Charge.

S&F Floor 150 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring, fixed in floor complete.

M&L 75 mm Z-Section Window hingsmedium weight cold rolled mild steel Completed.

Welding in repairs n. exc 2.5cm in length (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /).

All as per Srl No 179 here-in-before but exc 2.5cm but n exc 5cm in length (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /).

S&F Curtain dropary 25mm dia and 1.5 mm thick mild steel rod of fancy type with pvc coating excluding brass and brackets with curtain rings of approved quality etc complete.

S&F mild steel Nobs and bracket complete all as specified and directed.

M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-Charge.

Supply & fixing frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

Taking down aluminium door shutter including floor door closer, removing galss with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

S&F steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc complete all as specified and directed.

Dismantling of AC and plain/ corrugated steel sheeting, Fibre glass sheet any gauge, thickness, incl nainital or similar pattern roof covering complete.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F, 1mm thick Plain, galvanised, mild steel sheeting of class 7, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as directed.

S&F 2mm thickness fibre glass reinforeced translucent corrugated sheeting with two corrugations side lap fixed with coach srew and washer in roof ,wall etc complete all as directed.

S&F .63 mm thick black, corrugated mild steel sheeting with two corrugations side lap ,fixed with coach screws and washers in roofs walls,etcetc complete all as directed.

S&F 3 mm thick coloured polycarbonate sheets as in roof covering and fixing on stainless steel truss/ tubular truss with sufficient and compactable washer and bolts including bending if required.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165

Easing of door shutters exc 1.00Sqm but nexc 2.00 sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-Charge.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engr-in-Charge.

Taking down and removing from site shutter of any decrti on not exc 1 sqm complete as specifed and directed.

Taking down and removing from site shutter of any decrti on exc 1 sqm but n exc 2 sqm complete as specifed and directed.

S & F in repair WPC double Door Frame 125x65 mm including all fitting making good after complete as directed as speicifed Make Rajshree or equivelent.

S & F in repair WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed Make : Rajshree or equivelent

S & F in repair 35 mm thick WPC Door including making good after complete as directed as speicifed Make : Rajshree or equivelent

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @0.5 litre/hole by drilling 6 mm dia hole at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

M&L Providing and injecting chemical emulsion for post constructional Anti-termite treatment along external wall where the apron is not provided using chemical emulision at the rate of 7.5 litre per Sqm of the vertical surface of the sub structure to a depth of 300 mm including excavting channel along the wall and rodding etc. complete.

Supplied and fixed size 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified,

Supplied and fixed size 125 x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified.

M&L for cement concrete 1:3::6 Type C-o using 12.5 mm graded stoneaggregate as in back filling etc and similar work including necessary from work and complete all as specified and directed.

M&L for 30 mm thick second class hardwood glazed and skelton window ,ventilators shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

S&F precoated steel window Rolled formed GI Section ECO 4000 (Openable double rebate window) Providing and fixing of single rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS( stainless steel) heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square bars welded to 6 x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge.

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with Wood EPS board core, supplying & fixing in frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing.

S&F Aluminium handles cast type anodised of 200mm complete.

S&F Aluminium handles cast type anodised of 150mm complete.

S&F in repair Aluminium handles cast type anodised of 200mm complete.

S&F in repair , Aluminium anodised sections with powder coating for doors/windows/ventilators with one or more rebates and rubber packing and roller including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately including taking down of shutter.

M & L,in repair aluminium grills(Decogrill) and fixed including necessary glazing clips, anodized aluminiunm snap beading screws and aluminium fittings complete all as specified and directed.

S&F in repair 18/19 mm thick water proof ply decorative type with decorative face veneer on one face of commercial quality Gde-I fixed with screws as kitchen , cup board box and shutters & shelves etc all as specified and directed by Engr-in-Charge.

S&F in repair 18 mm thick Medium density fibre board ,exterior grade ,fixed to timber framework with screws all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel facny type Nobs and bracket and incl all necassary fitting complete all as specified and directed.

S&F in repair Curtain dropary 25 mm dia stainless steel fancy type rod of fancy type of approved quality etc complete.

M&L peg stay Z-Section Window medium weight cold rolled mild steel Completed.

M&L precoated handle Z-Section Window medium weight cold rolled mild steel Completed.

Supply & fixing frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing.

S&F for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet and frame 1.25 mm thick bent to shape incl two coats of syn enamel paint on int surface amd two coats hammer tone finish on external surface alongwith locking arrangement mortice lock handle etc complete all specified and directed.

M&L 3 mm thick cover fillets of standard hard board ,40 mm wide and fixing with screws complete all as specified and directed by Engr-in-Charge.

M&L Cement mortar 1:4 Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

RESTRICTED AREA SCHEDULE

Providing & laying of Emaco S88 CT or equivalent fibre reinforced pre - packed Polymer Modified cementitious Mortar on the sound substrate and making the surface is original shape. Cure it for 3 days.

Dismantling/taking down u/s parts of steel rolling shutters (self coiling types shutters i.e push pull machenicaly type with gear operating system and for repairing and overhauling of rolling shutters and greasing/oiling of members of rolling shutters. M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified. Note : (I) Refixing of rolling shutters duly repaired/overhauled/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item. (iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/Size/Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified.(area of rolling shutter 4.10 x 4.25mtr).

Dismantling/taking down u/s parts of steel rolling shutters exc 20sqm (self coiling types shutters i.e push pull machenicaly type with gear operating system and for repairing and overhauling of rolling shutters and greasing/oiling of members of rolling shutters. M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified. Note : (I) Refixing of rolling shutters duly repaired/overhauled/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of rolling shutters shall be included in the quoted rate of this item. (iii) Replacing of new parts of rolling shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/Size/Specifications of new parts of rolling shutters as per existing specificarion of rolling shutters. (v) Any damage or loss of rolling shutter during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified.(area of rolling shutter 2.12 x 3.072 mtr).

S&F Saftey lever locks mild steel with 4 leavers for rolling shutters.

Supply only MS sheet 1.25mm thick for hood cover complete.

Supplying only curtain ie interlocking lath sections formed from cold rolled steel strip 1.24mm thick complete.

Supply only helical wire spring or flat spiral spring complete.

S&F Ball bearing for rolling shutters.

Supply only ` 40mm bore pipes heavy weight for suspension shaft complete.

M&L for rough cast wired glass n exc 0.5sqm , 6.4mm thick and glazing with oil putty in square all as specified and directed.

S&F rolled mild steel in framing for cladding glazing framing work or similar work incl necessary cutting drilling welding etc fixed with angle cleatsand connecting plates confirmimg to FE 290 (GDE E-165) Complete all as specified.

S&F weldedsteel wire fabric and fixed complete to steel members weights not exceeding 4 kg/Sqm Complete all as specified.

Dismantling/taking down u/s parts of sliding shutters grishing ,oiling and replacement of damage part completely and M&L for preparation of old painted iron and steel surfaces by scraping & rubbing down with sand paper, removing dense and scratches, if any and filling the same with paste filler and applying one coat of synthetic enamel paint complete all as specified. Note : (I) Refixing of sliding shutter duly repaired/painted shall be included in the quoted rates of this item. (ii) Fixing of new parts of sliding shutter shall be included in the quoted rate of this item. (iii) Replacing of new parts of sliding shutters shall be paid and measured separately as supplying only under the relevent items. (iv) Makes/Size/ Specifications of new parts of sliding shutters as per existing specificarion of sliding shutters. (v) Any damage or loss of sliding shutters. during taking down/dismantling shall be made good by the contractor at his own cost complete all as specified.(area of sliding shutters. 4.10 x4.25mtr)

Mild steel, 1.60 mm yhick plain, black sheet in, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.

Taking down chowkats or frames n exc1.5 sqm with shutter (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames).

Taking down and removing from site shutter of any decrti on nxe 1 sqm complete as specifed and directed.

Taking down and removing from site shutter of any decrti on exe 1 sqm but nexc 2 sqm complete as specifed and directed.

S & F Steel window with side hung shutters incl BOX type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

S & F Steel window with side hung shutters incl BOX type hinges with steel handle , steel peg stay, complete without glazing bars cooler type window, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S & F in repair WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed Make : Rajshree or equivelent

S & F in repair 35 mm thick WPC Door including making good after complete as directed as speicifed Make : Rajshree or equivelent.

M&L for 35mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete.

M&L for 35mm thick second class hardwood glazed and skelton door shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sashbars size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete.

S&F factory made plain framed ,35 mm Panelled shutter (two Panel) with lock rail of 9 mm B.W.P. commercial ply or 12 mm veneered patticle boar with commercial veneering on both face , the size of rail and stile as per IS: 1003 (Part 1) kiln seasoned and chemically pressure treated.

M & L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with Wood EPS board core, supplying & fixing in frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing .

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing.

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges medium weight cold rolled Aluminium anodised 100mm long complete.

S&F Butt hinges medium weight cold rolled Aluminium anodised 75 mm long complete.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete,

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete,

S&F in repair Aluminium handles cast type anodised of 200mm complete.

S&F in repair Aluminium handles cast type anodised of 150mm complete.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S & F Sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F in repair 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.incl Sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-Charge.

S&F in repair , Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat and rubber packing and rollier for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.incl taking down of shutter.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S & F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

M & L,in repair aluminium grills(Decogrill) and fixed including necessary glazing clips, anodized aluminiunm snap beading screws and aluminium fittings complete all as specified and directed.

S&F Mortice lock,vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length.

All as per Srl Item No 282 here-in-before but exc 2.5cm but n exc 5cm in length.

S&F in repair stainless steel facny type Nobs and bracket and incl all necassary fitting complete all as specified and directed.

S&F in repair Curtain dropary 25 mm dia stainless steel fancy type rod of fancy type of approved quality etc complete.

M&L in repair for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-Charge.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/ 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match & including rendering 10mm thick in CM 1:4 on wall surface to receive wall tiles incl taking down of wall tilles completed as per specified.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4and to be finished even and smooth without using extra cement complete all as specified and directed.

S&F 20 mm size of wire mesh netting of stainless stell wire dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Preparation of new plastered or un-plastered surface and applyingtwo coat of cement base paint on walls complete all as specified and directed.

Schedule of credit amount of Rs. 1,46,018.00 to be deducted during AOC

M/S N K SONKAR

GHANI CONSTRUCTION