Construction of Toilets and Bath Rooms at AHS (G) Mahabubabad of Mahabubabad (M) in Mahabubabad District ( Reserved for SC Community as per GO 59, Dt:21.5.2018)

Toilet Block Ground Floor

Earth work excavation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308)

Plain Cement Concrete (1:5:10 proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Column

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinth Beam

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Beam

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab 125mm thick

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310 excluding seignerage & GST charges

Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310 excluding seignerage & GST charges

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Providing and fixing 30mm thick FACTORY MADE BOTH SIDE PRELAM SOLID PANEL PVC DOORS SHUTTER Consisting of frame made out of MS Tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails, MS Frame shall have a coat of steel primers of approved make and manufacture. M.S.Frame covered with 5mm thick heat moulded "Rajshri" Prelam Pack 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall betapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to from lock rail, top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmx2) thick, 20mm wide cross pac sheet shall be panelling of 5mm thick both side prelam pac sheet to be fitted in the MS Frame welded / sealed to the wide pac sheet beading on inner side and joined together with solvent cement adhesive etc on additional 5mm thick pac strip of 20mm width is to be stuck on the interior side of the 'C' channel using pac solvent cement adhesive etc., complete as per direction of Engineer-in-Charge, manufacture specification and drawing. For Toilets

Ceiling Plastering 12mm thick in CM (1:3) Single coat including cost and conveyance of all materials like cement, sand/rock sand (50:50), water etc., to site, , sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering even surfaces of wall with12mm thick in single coatin CM (1:5) including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding sales & other taxes on all materials,including all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding sales & other taxes on all materials,including all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)

Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Painting to External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., excluding sales & other taxes, including all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles, overheads & contractors profit etc., complete for finished item of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, any brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water, tiles, etc. to site, excluding seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in all floors

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, curing etc. complete for Slab of 150mm thick.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in Ground Floor (APSS No. 126) Category-B Steel

Toilet Block First Floor

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Column

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Beam

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab 125mm thick

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Providing and fixing 30mm thick Solid panel PVC Door Shutter Consisting of frame made out of MS Tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top and bottom rails, MS Frame shall have a coat of steel primers of approved make and manufacture. M.S.Frame covered with 5mm thick heat moulded "Rajshri" Prelam Pack 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall betapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to from lock rail, top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmx2) thick, 20mm wide cross pac sheet shall be panelling of 5mm thick both side prelam pac sheet to be fitted in the MS Frame welded / sealed to the wide pac sheet beading on inner side and joined together with solvent cement adhesive etc on additional 5mm thick pac strip of 20mm width is to be stuck on the interior side of the 'C' channel using pac solvent cement adhesive etc., complete as per direction of Engineer-in-Charge, manufacture specification and drawing. For Toilets

Ceiling Plastering 12mm thick in CM (1:3) Single coat including cost and conveyance of all materials like cement, sand/rock sand (50:50), water etc., to site, , sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering even surfaces of wall with12mm thick in single coatin CM (1:5) including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding sales & other taxes on all materials,including all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding sales & other taxes on all materials,including all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)

Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Painting to External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., excluding sales & other taxes, including all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles, overheads & contractors profit etc., complete for finished item of work.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, any brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water, tiles, etc. to site, excluding seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in all floors

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, curing etc. complete for Slab of 150mm thick.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in Ground Floor (APSS No. 126) Category-B Steel

WATER SUPPLY & SANITARY ARRANGEMENTS

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks inlcluding cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supply and fixing of premium make CPVC pipes and fitting to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tube sizes)1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 28.60 mm dia OD Pipes SDR 13.50

Supply and fixing of premium make CPVC pipes and fitting to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper tube sizes)1/2" to 2" SDR 13.5 pipes are made from idential CPVC compounds having the smae physical properties for Hot and Cold water (IS 15778:2007) 32.20 mm dia OD Pipes SDR 13.50

Supplying & Fixing Orissa Pan 580 mm x 440 mm white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580 mm x 440mm as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C. (1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supplying & Fixing 550 x 400 mm Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore single Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Nice/Senior or equivalent complete with standard CI brackets including wooden block, 12.7mm PVC connection with Brass union nut CP coated, 12.7mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling , 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. for All Floors.

Supplying & Fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Supplying & fixing of 25mm Ball valve confirming to DIN Standards 8077/8092 including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work

Supplying and fixing of 160mm dia 3 M Single Socket PVC/SWR pipe -4 Kg/sq.cm including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Supplying and fixing of 110mm dia 3 M Single Socket PVC/SWR pipe -4 Kg/sq.cm including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

ELECTRIFICATION

Supply and fixing of ISI mark 25mm outer dia heavy grade FRLS with IS:9537 part 3 rigid PVC pipe Sudhakar / Macoplast / Modimake concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, etc., complete for finished item of work.

Supply and fixing of ISI mark 25mm outer dia heavy grade FRLS with IS:9537 part 3 rigid PVC pipe Sudhakar / Macoplast / Modimake concealed in Walls with all required acessories including No.14 SWG GI wire for earth continuity including wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, etc., complete for finished item of work.

Supplying and wiring with 2 runs (22/0.30 mm)1.50 Sq.mm Fire Retardant (FR) P.V.C insulated 100W grader flexible copper cable L&T/ Havels /Standard/Polycab/Power flex make with ISI mark in the existing metallic / non-metallic conduct pipe with 6A flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for light, bell, fan and exhaust fan points in Non Residential Buildings

Supplying and fixing of 6A 3/2 pin flush type socket with shutter of GMG Home/ Anchor/Gold medal / Olive/ Million zoom make with ISI mark on a common switch board with earth continuity including wire leads , earth connections including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work

Supplying and fixing of batten holder / slanting holder anchor / Gold Medal olive / Million zoom make with ISI mark in lieu of ceiling rose of light point with 9w LED bulb all connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5Sq.mm) Fire Retardant P.V.C. insulated flexible copper cable of GM/L&T / RPG/ Havells / V-Guard /Power Flex/ Polycab/ Gold Medal/ Standard / Milion/ Vimal/ Suncab/ Paragaon /FortuneArt in existing metallic / non metallic pipe with run of 1 of 22/0.3mm (1.50 Sq.mm) Finolex / RR kabel/ Fortune Art EBXL Fire Retardant P.V.C. insulated flexible copper cable including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supply and transportation of 20W + /- 10% >2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply and transportation of 30W LED Street light Body made of high grade pressure die- cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >90 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD15, CCT 3000-6500K as desured by the department and as per IS ,CRI>70 built Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Art / FIEM / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply and fixing 4 way SPN Distribution board with IP-20 protection of make Standard / Havells / HPL/Toyoma/ C &S.. suitable for single phase 40A Double pole Isolator of make Standard / Havells / HPL/Toyoma/ C &S. as incomer and 10KA-6-32A range single pole miniature circuit breakers Six numbers (2Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Providing independent earthing for main switches integrated circuit cutouts and moters with 40mm dia Medium grade GI Pipe of TATA/Zenith/GST make of 2.5 m length duly providing 12mm dia 16 Nos. holes and rewired bolts, nuts and washers, checknuts, Humepipe ring 18 inches dia, 2 inch thick etc., as per IS specifications with necessary double GI earth wire NO. 8 SWG inclkuding filling with equal preparation of salt and charcoal in layers including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

C/O. SEPTIC TANK

Earth work excavation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Septic tank Foundation of Building.(APSS No. 308)

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, curing etc. complete for Bottom Slab of 125mm thick.

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, curing etc. complete for Side wall 150mm thick.

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Vibrated Reinforced Cement Concrete M20 Grade Nominal Mix corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) including centering, shuttering, laying concrete, curing etc. complete for Roof Slab 115mm thick.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work for Ground Floor. (APSS No.126) Category B Steel

Supply and Fixing of CI Steps for Septic Tank / Manhole complete for finished item of work including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Flooring and Treads with Polished shabad / Tandur stone minimum 15 to 18 mm thick of size (0.254M x0.254M) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, .

Plain Cement Concrete (1:5:10) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, natural river sand and Manufactured Sand (Rock sand) in the ratio of 50:50, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, natural river sand and manufactured sand (Rock sand) in the ratio of 50:50, water etc., to site, excluding sales & other taxes on all materials,including all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)

Painting to Old internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (2) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Painting to Old External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., excluding sales & other taxes, including all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Roofiing Roofing: will be provided with 0.50mm thick galvanized pre painted GI profiled sheets to the Purlines with 14 size self drilling screws with neoprence washer side are stiched with self tapping/ drilling screws scres end taps areto be sealed with 25x3 mm Buty taps. The sheets are provided with anit capilary grove -10 sqms,

Manufactutring supply and fixing of MS OD pipe 50x50x3mm MS Squary Medium Class MS pipe including cost and conveyance of all materials

Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Painting to New Wood work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Providing Galvanised Iron Fly proof wire mesh of not less than 20 guage wih Sal wood stykes & rails of 25mmx12.5mm including cost and conveyance of all materials acessories , labour for ttransporation erection at site complete for finished item of work

Supplying and fixing of 2 panelled windows, each shutters of size 0.41x1.42 of 2 nos 30mm thick wooden shutter of solid bond wood block board type with commercial ply on both faces the corner of the frame should be welded/jointed with approved quality MS power coated butt hings I/s 205 125mm long of 4 Nos. using butt hings the windows should be provided along wth fixtures such as MS power coated handles I's 208 125mm long 2 Nos. sales and other taxes cost and conveyance of all materals top site all labour charges such as fixing in position fixing of shutters & hard ware fixtures etc., complete for finished item of work.

ELECTRIFICATION

Supplying and wiring with 2 runs (22/0.30 mm)1.50 Sq.mm Fire Retardant (FR) P.V.C insulated 100W grader flexible copper cable L&T/ Havels /Standard/Polycab/Power flex make with ISI mark in the existing metallic / non-metallic conduct pipe with 6A flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for light, bell, fan and exhaust fan points in Non Residential Buildings

Supply and Fixing of 16A 3pin and 6A 3pin plug socket with indicator lamp and 16A fuse unit and 16A switch control (5 in 1) of Milltec / Vimal opel / Maru mantero / Starex smil / CPL make with ISI mark duly recessed in wall with wooden deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth ontinuity including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

Supply and run of 2 of 36/0.3mm (2.5Sq.mm) Fire Retardant P.V.C. insulated flexible copper cable of GM/L&T / RPG/ Havells / V-Guard /Power Flex/ Polycab/ Gold Medal/ Standard / Milion/ Vimal/ Suncab/ Paragaon /FortuneArt in existing metallic / non metallic pipe with run of 1 of 22/0.3mm (1.50 Sq.mm) Finolex / RR kabel/ Fortune Art EBXL Fire Retardant P.V.C. insulated flexible copper cable including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.

Supply and run of 2 x 4.00 Sq.mm (56/0.3mm) Fire Retardant P.V.C. insulated flexible copper cable of GM / L&T / RPG / Havells / V-Guard / Power Flex / Poly cab / Gold medal in existing metallic / non metallic pipe with run of 1 of 1.00 Sq.mm (14/0.3mm) GM / L&T / RPG / Havells / V-Guard / Power Flex / Poly cab / Gold medal Fire Retardant P.V.C. insulated flexible copper cable including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and transportation of 20W + /- 10% >2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI≥80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply and errecting Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete and pointed with lettering by enamil paint the Sr. No. and date of errection including cost and conveyance of all materials and labour chargers etc., complete including 4% tornover tax on cost of all materials for finished item of work.Makes : Crompton HS Decora / Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown / Usha technix decorative

Supply and transportation of 30W LED Street light Body made of high grade pressure die- cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >90 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD15, CCT 3000-6500K as desured by the department and as per IS ,CRI>70 built Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Art / FIEM / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

RUPEES SEVENTY FIVE LAKHS THIRTY SIX THOUSAND NINE HUNDRED FIFTY FIVE ONLY