COMPREHENSIVE REPAIRS TO JOINERY, PLASTERING, SANITARY FITTINGS AND REPAIRS TO ROOF TREATMENT, AC SHEETS, FALSE CEILING, FLOORING, TILING ETC IN CERTAIN BUILDINGS IN TECH AREA TAKU, CPE ITARSI

Amount

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n exc 1.50 sqm each including making good area all as specified and directed.

Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each including making good all as specified and directed.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site

Taking down shutters of any description size of shutter n exc 1 sqm and removing from site

Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each.

S&F pressed steel frame for doors and windows with two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

S&F pressed steel frame for doors and windows with one rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mmx100mm made out of 5mm plain colour PVC sheet reinforced with MS complete all as specified and directed.

Supply and fix 30mm thick factory made solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, suppling and fining in frame at site complete all as specified and directed.

Supply and fix 30mm thick factory made solid HDF Moulded Door with wood free EPS , 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick Moulded masonite sheet on the one face and and 5mm plain colour masonit sheet on back face, suppling and fining in frame at site complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutter’s for door open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) complete all as specified and directed.

S & F factory made 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S/F 35 mm thick glazed and Skelton shutters IInd class hard for windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) prepared to receive in SSR part-I class 8 (R) glass gage dividing in squares size of member complete all as specified and directed.

M& L for Box type steel window double frame (glazed & gauged) made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, complete all as specified and directed.(Note- sheet glass,wire mess,10mm Sqr Bar security grill will be measered and paidseaperately and window will be measured one side only)

.-ditto as per item No 14 but window single frame (glazed) box type window

M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or flanged into spikes, railings and similar work confirming to Fe 290 Gde E-165 all as specified and directed.

S&F Steel ventilator with fixing of half portion glass and half portion Welded steel wire fabric including hungs steel peg stay complete all as specified and directed.

Supply and fixing 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix in repair 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix in repair 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal frame complete all as specified and as directed.

S& F in repair 2mm thick acrylic plain sheeting fixed with coach screw and washer in windows/ventilators etc.from metal /wooden frame complete all as specified and as directed.

Hacking out glass old broken(any thickness, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and supply & fix sheet glass ordinary quality 4mm thick and glazing with oil putty in squares not exceeding 0.50sqm in each pane all as specified and directed.

Supply and fix mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.18mm, fixed with ms steel wire staples complete all as specified and directed.

Supply and fix in repair Welded steel wire fabric( weight not less than 4kg per sqm) fixed and incuding ms angle iron frame including takling out old wooden frame complete all as specified and directed.

Supply and fix in repairs mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sqcm and over in section any position.

Dismantling of Asbestos Cement sheeting any gauge, thickness,as in roof covering all as directed.

Excavation in post holes (or Similar holes) each not exc 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose soil complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed.

S&F steel work tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

S&F pre-painted galvanized aluminium zink coating GI based corrugated steel sheeting 0.50 thk of an colour having tensile strength 550Mpa as in roofing fixed with self tapping screws complete all as specified and directed.

All as per Sl item No 33 here-in-before but as in ridge / flashing board of width and girth not less than 610mm.

Dismantling steel rolling shutter, steel work including door, gate etc complete all as specified and directed.

S&F in repair 1.25mm thick of laths of Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed.

Ditto, but gear operated type with bevel gear box and crank handle

Taking down the existing rolling shutters from the existing opening and refixing the same in position after carrying out repairs including easing out etc all as specified and directed.

Supply and fix in repairs Ball bearing for rolling shutters complete all as specified and directed.

Dismarting the existing ceiling board of any description fixed in any position with nails and S&F in position suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, Angle for ventilators etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltr complete all as specified and directed.

Supply and fix rotational moulded PVC water storage tank, 500 ltr capacity (cylindrical vertical type multy layered with closed top) including inlet, outlet andbrass valve, high pressure with polythene float valve of 20 mm . washout holes of approved make hoisted and fixed complete all as specified and as directed.

Supply and fix in repair moulded polythene water storage tank of 1000 ltr capacity hosted and fixed in position and brass valve, high pressure with polythene float valve of 20 mm complete all as directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

S&F in repair 15mm dia PVC connection with PTMT nuts and PVC washers 45 cm long and connecting of water pipes all as specified and directed.

S&F PTMT grating with 100mm dia with or with out waste hole complete all as specified and directed

S&F in repairs chromium plated brass shower roses 125mm size(approved by Engineer-in-Charge) fixed in repair to steel pipe as union complete all as specified and directed .

Taking up or down steel tubing and connections of 15mm/bore complete all as specified and as directed.

All as per item No. 52 hereinbefore but 20mm or bore of pipe

S&F of GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion all as specified and directed.

All as per item No. 54 hereinbefore but fixing only 15mm bore pipe (GI pipe taken down vide item no. 52 hereinbefore shall be reused)

S&F GI Tubing medium grade 20mm bore laid in trenches and as wall complete including cuttings chases in walls and making good, cutting portion all as specified and directed.

All as per item No. 56 hereinbefore but fixing only 20mm bore pipe (GI tube taken down vide item no. 53 hereinbefore shall be reused)

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed.

S&F in repair pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair concealed stop cock 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type)

S&F in repair vitreous china squatting pan Orissa pattern size 580 x440mm white with integral footrest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor all as specified and directed.

S&F in repair vitreous china squatting wash down water closet padestral patern EWC ,white, including trap set, seat cover and conection to trap, flushing pipe, etc. complete including making good to floor fixing bolt all as specified and directed.

Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 - 10 liters capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stain less steel with long bend of 32mm dia complete all as specified and directed.

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and directed.

Supply & Fixing vitreous china urinal half stall type with CP spreadr white with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix in repair PVC (SWR) bend 110 mm dia, Shue, complete all as specified and directed.

Supply and fix in repair PVC (SWR)branch piece, single T equal or unequal 110 mm dia complete all as specified and directed.

Dismantling cast iron drain pipes jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed.

Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed

Material and labour for brick work with subclass ‘B’ bricks,straight or curved on plan exc 6m mean radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed

S&F for 25 mm dia chromium plated steel drapary curtain rod with bracketes incluing neserrary drilling holes and fixing with rawl plug and suitable screw in wall complete all as specified and directed

Supply and fixing MS chromium plated finials/end ball (lattu) suitable 25 mm dia drapery curtain rod complete all as specified and directed.

Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and directed.

Demolition of reinforced Concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 83&84 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.

Applying two coats of “Epoxy zinc rich primer” as protective coat to expose surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.

All as per item No. 86 above but reinforcement upto 10mm dia. Note for item No 83 to 86: (i) Cost of chemical i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item here in below. (ii) The work shall be carried out by the trained person as per manufacturer's instructions i.e. FOSROC/SIKA/ PIDILITE

Supply only epoxy zinc rich primer. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE

Supply only Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

All as per item No. 90 hereinbefore but for mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders.

Material and labour for reinforced cement concrete in 1:2:4, type B1, using 20mm graded stone aggregate (nominal mix) as in chajja, facia, railing and parapet complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete, including fair finishing the concerete surfaces with cement mortar 1:3 10mm thick all as specified and directed.

All as per item No. 94 above but in slab, landing, balcony and similar items.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed

Taking down existing cement plaster of any descrption on brick walls and material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

All as per item no. 99 hereinbefore but other than fair faces of brick work.

Taking down existing cement plaster from RCC surfaces and material and labour 10 mm thick plastering in CM 1:3 on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and directed

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

M&L for PCC 1:2:4 type B-1 (using 20 mm grated stone aggregate) 100 mm thick as flooring finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L cement concrete 75 mm thick 1:2:4 type B2 using 20 mm graded stone aggregate as in flat floor finished even and smooth without using extra cement completed all as specified and directed.

Dismantling floor hearh or, wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

Material and labour for ceramic (Non skid) tiles area of each tile exc 0.11 sqm but n exc 0.18 sqmx7 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick pigment to match the colour of screed in cement mortar 1:6 complete all as specified.

M&Lcoloured glazed ceramic tiles 300x200x7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4

.Do.- but size of tiles 450x300x7mm thick

M&L glazed ceramic non skid coloured tiles area of each tile exc 0.06 sqm but n exc 0.11 sqmx7mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed in cement mortar 1:6 complete all as specified.

Material and labour for coloured Vetrified tiles size 600 x 600mm x 9 mm thick as in floors set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortor 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and directed

M&L for coloured Vetrified tiles size 600 x 600mm x 9 mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and incl 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

S&F in repairs aluminium door closer hydraulicaly regulated designation No. 03 universal type suitable for shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed.

M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer all as specified and directed

M&L for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces all as specified and directed

M&L for two coats of fire resistant paint over a coat of primer on new/old surfaces of wall including complete removal of existing treatment all as specified as directed.

M&L for applying two coat of oil bound distemper above a coat of primer incl. complete removal of old treatment or on newly plastered surfaces complete all as specified and directed.

M&L 20 mm thick screed bed in CM 1:4 finsished even and smooth without using extra cement on roof surfaces using water proofing compounf all as specified and as directed (Note : WPC will be measured and paid separately)

Supply only integral water proofing liquid admixture for concrete and mortar (Make : CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of Pidilite)

Taking down/removing the existing roof treatment including backing coat if any and disposal of debris to a distance not exc. 100m as directed by Engr-in-Charge and brushing neat cement slurry with 3.0 Kg/Sqm over roof slab and priming the surface of plaster using bitumen primer @ 0.4 Ltr/Sqm and applying water proofing treatment using 3mm thick Acetic poly propylene (APP) Membrane modified pre fabricated with non woven polyester reinforced established Weight not less than 3.6 kg /sqm laid over a coat of bitumen 85/25 @ 1.2 Kg/ Sqm as per manufactures instructions complete all as specified and directed.

Dashmesh Enterprises

pyarelal galar

TANUJ CONST. CO.