BIRED/87/e-NIQ(1st Call) of 2024-2025

Amount

Supply of 9 Mtrs GI octagonal pole fabricated part as per dimansion: Top dia-70 mm, bottom dia -155 mm (Sectional length-9000 mm) Thickness-3 mm, base plate-260mm X 260 mm X 16 mm. Foundation Bolt- M24 X 750 mm X 4 nos ' J ' type bolts. [N.S] (Pole will be supplied after inspection of factories/ godown by EIC) (Make-Utkarsh/ Transil/ Bajaj)

Design, drawing & civil foundation(Size: 1.5mtrx0.6mtrx0.6mtr) work and erection of 7 mtr. long GI octagonal pole by earth work in excavation of foundation trench approx 1.65mtrx0.7mtrx0.7mtr) including removing of spoils and necessary trimming the side of trench levelling dressing and after that picket jhama brick soling and dressing bed levelling and filling joints & PCC after that 6 mm dia rod proper size, stirrups, binders etc and vertically M.S 6 mm dia Rod suitable dia complete with binding with black annealed wire, shuttering and concrete including fixing of pole foundation bolts( with graded stone chips 20mm as IS proportion(1:2:4) complete and water rigidity next seven days. Before eraction necessary drawing should be approved from EIC.) --for 9 mtr.long GI octagonal pole-

Supply of 2 / 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make- KEI/Polycab / RR Cable /Finolex]-i)2 Core 10 Sq mm

ii)4 Core 35 Sq. mm [ NS ]

Supplying & Fixinf of compression type cable gland and finishing those for following XLPE/PVC Armoured cable 2 Core 10 Sqmm as per GS.(F-4(7-a) &F-5(8-b)

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed.(2-a/F-2).

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required[F-6/11-d]----50 mm Dia

Supplying & Erection of No. 6 SWG GI (Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clamp.[H-4/F-1]

Dismantling of OH line comprising of copper/AAC/ACSR conductor, cross arms / ‘D’ iron clamps / brackets / ‘V’ brackets etc. insulators, earthwire, cradle guard, safety devices, staywire etc., incl. sorting out, rolling the conductors, stacking, loading at site and delivering, unloading , measuring the conductors, sorting, stacking properly at any place as per direction upto a lead of 1.6 km. OH line comprising of 3 phase, neutral, street light phase & earth wire [I-2/15-b]

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km.[I-2/14]

Supplying and Erection of Galv. Stay set complete with 7/12 SWG GI (Hot Dip) Stranded stay wire (45 ton quality), 1.8 mtr.x 16 mm dia Galv. stay rod 100 mmx100 mm x6 mm thick Galv. MS anchor plate, 356 mmx13 mm dia Galv. bow (with ratchet type nut), thimble, Galv. Box type Stay Clamp in CC foundation (6:3:1) having hard jhama metal incl. providing earth connection. [H-3/3]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: [G-1/2-a] (a) ISI Medium GI pipe. [For pole earthing]

Excavation of soil for installation of Earth Electrode and filling & ramming.--(a) For Soft Soil.[G-1/1-a]

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting.[ H-5/H-4]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand-Havells/Finolex/KEI) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (a) 3 x 1.5 sq mm [E-9/1-b]

Supply of 25 mm dia heavy gauge polythene pipe. (As per directin of EIC)[ K-2/52]

Straigh through Jointing of cable of size 4Cx300Sqmm by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC).[F-6/10-xii]

Labour Charges for boring through any type of soil for passing 2 No 40 mm dia GI pipe(TATA/JINDAL) under the CC/Black top road passing for different size of cable Horizontally before cutting soil to side of roads of 1 mtr depth incl. all necy. works for easy access of passing cables. [NS]

Fixing only 80 mm dia 1.5Mt long mini GI pole [TATA-M] including providing cement concrete(6:2:1) muffing around pole of dimension 2’-6 X2’-6”X2’-0” above roof level with cement mortar plastering and neat cement finish. Including S/F 8”X6”X4” GI loop box which contains one 5 Amp Fuse and one 4 way terminal with 4pole Bakelite stud &40mm dia alkathane pipe for cable entry as per GS. [N/S]

Supply and febrication of 80 mm dia 1.5 Mtr long GI pole [TATA-M] including1.5 Mtr long 32 mm dia arm bracket strongly welded with pole by 3 mm thickness GI plate and below the pole a GI plate dimension [150 mm x 150 mm x 7 mm thickness] fixed by welding , which is painting by 2 coat ISI marked Primer and 2 coat alluminium (ISI) paint.

Supply and delivery of 240 volt,100 watt IP 66 protection LED street light which consist-110 lumen/watt and pressure die cast alluminium housing.(Make-Crompton.(Model No- LSTP-100-CDL-M) or philips or havells)

Supply of 4ft LED T-8 box type single batten with end cap complete with all accessories [CROMPTON/Havells/Philips]. [NS]

S&F 20W LED T-8 lamp [CROMPTON/Havells/Philips] on fittings.

Fixing only single/twin fluorescent light fitting in the ceiling fixed with “L” type MS clamp as per GS [17/C-2]

Supply and fixing of 240 volt, 30 watt well glass luminaires have an efficacy not below110 lm/Watt, which have IP 66 protection. (Make-Crompton / Philips/ Magik)Model- Crompton Cavelo, Cat No-CIP-312-30-57-SLCP-NBK) OR Similar type specification of other brand.

MOON LIGHT

NIRMAN ENTERPRISE

PAL ELECTRICAL