OT-106

Amount

a) Earth work excavation and depositing on bank with initial lead of 10m & initial lift of 2 m in all types of soil as directed by the Engineer at site, including cost of tools and plants, labour charges, leads, lifts, transport, etc., complete.

b) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2 m in soft disintegrated rock, laterite, soft rock or kankar, not requiring blastingas directed by the Engineer at site, including cost of all tools and plants, labour charges, leads, lifts, etc., complete.

Providing PCC 1:4:8 using 40mm HBG metal for foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc., complete.

Providing Random Rubble Masonry in CM 1:5 for foundation as directed by the Engineer at site, including cost of all materials, labour charges, curing, leads, lifts, etc., complete.

Brick work in CM 1:4 using fly ash bricks as directed by the Engineer in charge including cost of all materials, labour charges, curing, lead, lift, T&P, etc., complete.

Providing and placing of RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of reinforcement.a)For Plinth beam

Providing and placing of RCC 1:1½:3 using 20mm HBG metal as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete but excluding cost of reinforcement.b)For lintel beam, Sunshade, Roof slab and Cubboard slab

Supplying, fabricating and placing in position of RTS/MS rod for RCC works as directed by the Engineer at site including cost of steel, labour charges, binding wire, lead, lift, etc., complete.

Plastering in C.M 1:5, 12mm thick for wall surfaces including cost of all materials, labour charges, curing, T&P, lead, lift, etc., complete.

Refilling with excavated soil (Other than sand) complying with standard specification for filling in foundation and basement as directed by the Engineer at site, including cost of labour charges, lead, lift, etc., complete.

Providing floor finish with C.M 1:3, 20mm thick as directed by the Engineer at site including cost of all materials, labour charges, curing, lead, lift, etc., complete.

Supplying, fabricating and fixing in position of MS fully paneled door of double leaf of required size using, 40X40X6mm MS Angles for door frame, 30X30X5 mm MS Angles for shutter frame by adopting 5Nos. horizontally, 2Nos. vertically, shutter covered with 18 Gauge MS sheet, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lift, etc., complete.

Supplying and fixing in position of partly glazed mild steel windows of required size using 23x18x18x3mm 'Z' section for window main frame, 46x23x20x3mm 'J' section for intermediate frame, 23x18x18x 3mm 'Z' section for shutter frame with 4 leaves top leaves glazed with 4mm thick plain glass, bottom leaves panaled with M.S sheet of 18 gauge with 10mm square bar grill at 100mm c/c, 4 Nos of hold fasts, handle pulleys, latches with locking arrangements, including cost of fabrication, transporting, lifting and fixing, embedding the hold fasts in walls rigidly with concrete PCC 1:1½:3, painting two coats with enamel paint over a coat of primer, cost of all material, labour charges, lead, lift, T&P, etc., complete.

Providing two coats of Oil bound distember of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift, etc., complete.

Colour washing with two coats of cement paint over a coat of white cement for the exterior surfaces including cost of all materials, scaffolding, labour, curing, lead, lift, etc., complete.

Supplying and fabricating and fixing of M.S structural works using M.S angle of various sizes for vertical and other supports etc., as directed by the Engineer at site including cost of all materials, labour charges, scaffolding, welding, bolts and nuts if required, lead, lift, etc., complete.

Painting the structural steel work with two coats of enamel paint of approved quality and colour over a coat of primer including cost of all materials, labour charges, scaffolding charges, brushes, lead, lift, etc., complete.

Supplying and fixing of colour coated metal roofing sheet of 0.47mm thick of approved make over M.S Structural frame work with necessary screws including cost of colour coated metal roofing sheet, screws for fixing and all required materials, lead, lift, labour charges, etc, complete.

NVS and Co

SRI SELVALAKSHMI ENTERPRISES

THANGAM .R