Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC NAGLA NANDA DHANAULI JAGNER ROAD AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹45.5 L+₹5.5 L (13.9%)Rejected-Finance | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹48.0 L+₹8.1 L (20.3%)Rejected-Finance | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹48.5 L+₹8.5 L (21.4%)Rejected-Finance KE 100 B KAVERI KUNJ PHASE I KAMLA NAGAR AGRA 282005 | AGRA | AGRA | UTTAR PRADESH | 282005 | L4 | Rejected-Finance Being higher bidder | |
| 5 | L5₹48.6 L+₹8.6 L (21.7%)Rejected-Finance HIG 37 GROUP 38 TAJNAGARI PHASE 1 AGRA 282001 CWE AGRA | AGRA | UTTAR PRADESH | 282001 | L5 | Rejected-Finance Being higher bidder |
| Sl No | Description | Qty | Unit | jmd engineers L2 | GIRENDRA SINGH AND CO L6 | MUKTA AND COMPANY L7 | J P CONTRACTORS AND SUPPLIERS L5 | M/s S.M. Construction L3 | M/s Sumer Associates L4 | M/S Arti Constructions L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00M&L in renewal for lead joints including spun yarn & taking out old lead by burning etc for the following bore of CI pipe /fittings complete all as specified and directed Note: (i) The quoted rate shall be deemed to be inclusive of the necessary excavation and earth work complete. (ii) Old taken out lead to be used in making of lead joint | ||||||||||
| 1.10 | 300 mm bore | 6 | Each | 4,500 ₹27,000 | 4,200 ₹25,200 | 4,200 ₹25,200 | 4,350 ₹26,100 | 4,500 ₹27,000 | 4,200 ₹25,200 | 3,000 ₹18,000 Lowest |
| 1.20 | 200 mm bore | 4 | Each | 3,000 ₹12,000 | 3,200 ₹12,800 | 3,200 ₹12,800 | 3,250 ₹13,000 | 3,200 ₹12,800 | 3,200 ₹12,800 | 2,000 ₹8,000 Lowest |
| 1.30 | 150 mm bore | 8 | Each | 2,200 ₹17,600 | 2,500 ₹20,000 | 2,500 ₹20,000 | 2,450 ₹19,600 | 2,500 ₹20,000 | 2,500 ₹20,000 | 1,500 ₹12,000 Lowest |
| 1.40 | 100 mm bore | 6 | Each | 1,300 ₹7,800 | 1,400 ₹8,400 | 1,400 ₹8,400 | 1,480 ₹8,880 | 1,400 ₹8,400 | 1,400 ₹8,400 | 1,000 ₹6,000 Lowest |
| 1.50 | 80 mm bore | 4 | Each | 1,000 ₹4,000 | 1,100 ₹4,400 | 1,100 ₹4,400 | 1,130 ₹4,520 | 1,000 ₹4,000 | 1,100 ₹4,400 | 700 ₹2,800 Lowest |
| 2.00Dismantling, opening head of sluice valve, taking out wedge nut/spindle with nut/wedge for replacement and refixing after replacement of Gun metal wedge nut and stainless steel spindle and refacing/regrinding sheet etc for the following size of sluice valve including nuts, bolts, washer, rubber packing and gland complete all as specified and directed. | ||||||||||
| 2.10 | 300 mm bore | 4 | Each | 6,000 ₹24,000 | 6,300 ₹25,200 | 6,300 ₹25,200 | 6,450 ₹25,800 | 6,300 ₹25,200 | 6,300 ₹25,200 | 4,000 ₹16,000 Lowest |
| 2.20 | 150 mm bore | 8 | Each | 3,000 ₹24,000 | 3,200 ₹25,600 | 3,200 ₹25,600 | 3,350 ₹26,800 | 3,000 ₹24,000 | 3,200 ₹25,600 | 2,500 ₹20,000 Lowest |
| 2.30 | 100 mm bore | 6 | Each | 2,500 ₹15,000 | 2,600 ₹15,600 | 2,600 ₹15,600 | 2,700 ₹16,200 | 2,500 ₹15,000 | 2,600 ₹15,600 | 2,000 ₹12,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jul 2025, 6:00 pmClosed
GE TECH AREA AGRA
Military Engineers Services Garrison Engineer (AF) Tech Area Agra - 282008
REPAIR/ MAINT OF RISING MAIN, CI, DI AND GI PIPE LINE AND OTHER CONNECTED WORKS TO WATER SUPPLY SYSTEM UNDER GE (AF) TECH AREA AGRA
2025_MES_711440_1
8200-1706/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
AF TECH ATREA AGRA
Class D category a(ii)
8 documents required · 8 mandatory
₹500
Yes
GE TECH AREA AGRA
₹90,000
Yes
2 Sept 2025
26 Jun 2025
23 Jul 2025
26 Jun 2025
19 Jul 2025
12 Jul 2025
Amount
M&L in renewal for lead joints including spun yarn & taking out old lead by burning etc for the following bore of CI pipe /fittings complete all as specified and directed Note: (i) The quoted rate shall be deemed to be inclusive of the necessary excavation and earth work complete. (ii) Old taken out lead to be used in making of lead joint
300 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
Dismantling, opening head of sluice valve, taking out wedge nut/spindle with nut/wedge for replacement and refixing after replacement of Gun metal wedge nut and stainless steel spindle and refacing/regrinding sheet etc for the following size of sluice valve including nuts, bolts, washer, rubber packing and gland complete all as specified and directed.
300 mm bore
150 mm bore
100 mm bore
80 mm bore
Taking up/down GI/HDPE tubing of any length including fitting from trenches, walls, ceilings for relaying/replacement for the following sizes all as specified and directed :-
40 mm bore tubing
50 mm bore tubing
80mm bore tubing
100mm bore tubing
Laying only in trenches GI/HDPE tubing in any length with connections as retrieved from item No 3 here-in-before after cleaning, washing or removing old screw thread as required & providing new fittings, as required, complete all as specified and directed for the following sizes :-
40 mm bore tubing
50 mm bore tubing
80mm bore tubing
100mm bore tubing
M&L for cutting of existing HDPE/ GI pipe of 40/50mm bore for cleaning/ leakage repairing and re-jointing the same in existing position with & including jointing rings and heating process including all necessary excavation & earth work if required and making good the surfaces as per existing complete all as specified and directed.
Supply, laying, jointing and testing Mild steel galvanised water tubing, medium grade, with and including all GI fittings in trenches complete all as specified and directed of following bore.
40 mm bore tubing
50 mm bore tubing
80mm bore tubing
100mm bore tubing
M&L in for drilling & tapping cast iron mains in position for branch connection of 20mm bore GI pipe with MS clamps including necessary earth work if required etc complete all as specified and directed.
Supply & fixing in renewal gun metal globe gate valve with iron wheel head, screwed both ends ISI marked for the following sizes complete all as specified & directed :-
50mm bore
40 mm bore
S&F in repair Cast Iron sluice valve duly ISI Marked with iron wheel head both end flanged , stainless steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc. complete all as specified and directed of following bore and presssure rating.
300 mm bore, PN 1.6
200 mm bore, PN 1.6
150 mm bore, PN 1.6
100 mm bore, PN 1.6
80 mm bore, PN 1.6
M&L in renewal for ‘D’ joints complete with collars, rubber ring, nuts & bolts etc for following bore complete all as specified and directed.
300 mm bore
200 mm bore
150 mm bore
100 mm bore
80mm bore
50 mm bore
S & F and testing reflux valve (non return valve ISI -5312) CI heavy duty both end flanged of pressure rating PN 1.6 and jointing with joint with rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers complete all as specified suitable for following bore pipe
150 mm bore
100 mm bore
80 mm bore
Supply & fixing in renewal Cast iron pipes with flanged ends, centrifugally cast, class B, in any length laid in trenches/over head reservoir with Nut bolt and all fitting arrangments of following dia complete all as specified and directed . Note - (a) The subject work is to be carried out upto 21.00 m hight (b) The quoted rate shall be deemed to be inclusive of the cost of all tools and plants (c) The contractor shall provide sefety measure to avoid any incidents during progress of work.
80 mm dia
100 mm dia
150 mm dia
Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.
Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.
M&L for Cutting of cast iron pipe in position for insertion of new tee, collar etc including necessary earth work if required complete all as specified and directed for the following bore: -
M & L in renewal for flange joints with rubber sheet 3mm thick, including nuts, bolts including necessary earthwork if required complete all as specified and directed for the following bore:-
Supply, fixing, jointing & testing in renewal cast iron fittings such as bends (any types radius and angle) tappers, collars, tee , Y junction, plugs, caps and connecting pieces or any other special required at site for the flanged/spigot and socketed pipes upto 150 mm dia complete all as specified and directed.
Supply, fixing, jointing & testing in renewal cast iron fittings such as bends (any types radius and angle) tappers, collars, tee , Y junction, plugs, caps and connecting pieces or any other special required at site for the flanged/spigot and socketed pipes 200 to 300 mm dia complete all as specified and directed.
Taking up cast iron water mains in any length (including all fittings), with flanged/spigot and socket ends and lead joints including burning out joints and recovering lead for the following cast iron water mains complete all as specified and directed.
100 mm bore
150 mm bore
200 mm bore
300 mm bore
Relaying of CI/DI pipe of following dia obtained from item here in before in any length complete all as specified and directed.
100 mm bore
150 mm bore
200 mm bore
300 mm bore
M&L for DI pipes ISI marked of make as specified with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329(2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed for the following sizes:-
100mm bore
150mm bore
200mm bore
300 mm bore
Taking out unserviceable submersible pump set including motor from bore well of capacity 1.5HP after disconnecting all electrical connections & supply, fixing, lowering, commissioning & testing submersible pump set of discharge capacity 70 LPM at 57 metre head single phase , 230 volt AC electric driven 2900 RPM of 1.5 HP including necessary wiring from motor to panel etc complete all specified and directed.
M&L for demolition of cement concrete (unreinforced) of any description and in any position, cutting roads, cement concrete in floor/paving all as specified and directed
PCC 1:2:4 (nominal mix) type B-2 using 40mm graded crushed stone aggregate, as in filling of road / floor cuttings and the like complete including weathering, slightly rounded or chamfered angles and throating all as specified and directed.
M & L for construction of brick masonry valve pit with sub-class 'B' bricks (using old size bricks), built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick thick walling and150 cm x150 cm x 10 cm base foundation with PCC (1:3:6), type C2 using 40mm graded stone aggregate, cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, of brick work with and including MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet with and including (40 x 40 x 5) mm angle iron framing fixed on top of the valve pit & painting the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary excavation and earth work and demolition of the existing old valve pit and removal of old demolished materials and surplus excavated soil to a distance n-exc 50m etc complete all as specified and as directed.
jmd engineers (BID ID -3356815)
M/s S.M. Construction (BID ID -3359104)
M/s Sumer Associates (BID ID -3360208)
J P CONTRACTORS AND SUPPLIERS (BID ID -3364016)
GIRENDRA SINGH AND CO (BID ID -3362096)
MUKTA AND COMPANY (BID ID -3363231)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .