PROVN OF 01 X TOILET BLOCK AT RIGHT SIDE OF BLDG NO. 112 (OTM ACCN) OF 146 INF BDE SIG COY UNDER AGE(I) AYODHYA CANTT

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soil and loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.

M&L for PCC (1:4:8) type D2 ( using 40 mm graded stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste of formwork to foundation, footings, plinth beams, bases of columns and the like for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick for fair finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to columns and the like for fair finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangings ets also splays between floors & beams and the like for fair finished flat concrete surfaces complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, binders and the like complete all as specified

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation, footings, foundation beam, plinth beams and bases of columns, basement slabs and mass concrete complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns pillers, piers, posts and struts and the like complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels over 1.50m span and the like complete all as specified and directed.

M&L for RCC (1:2:4) type B1 ( using 20 mm graded stone aggregate) as in slabs supported on walls, beam, and colums in floors, roofs, landings, deck slabs and shelves and the like complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4) in half brick th walls, straight or curved on plan exc 6m mean radius complete all as specified .

M&L for sand filling under floors, foundations and cushioning layer below interlocking paver tiles, laid & spread in any thickness and well compacted to a true surface complete all specified and directed.

M&L for hardcore of broken bricks or boulders n.exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggrgate) as in sub base, sub floor and the like complete all as specified.

M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc over and including 15mm thick screed bed in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x 7 mm / 450x350x7mm thick as in vertical surface over and including 10mm thick rendering coat incement mortar (1:3), set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles complete all as specified and directed.

S&F 25 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed by Engineer-in-Charge.

S&F 15mm bore bib taps cast copper alloy, screwed down high pressure with crutch or butterfly handle, fancy type, chromium plated, screwed for iron pipe or for brass furule complete all as specified and directed.

S&F 15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, fancy type with long chank & cup (concealed type), chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 15mm-142 gms/20mm-210 gms), fixed to iron pipe complete all as specified and directed.

S&F 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45 gms/40mm-60 gms) for kitchen sink complete all as specified and directed.

S&F glass shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (min weight 300 gms) complete as specified and directed.

S&F Towel rail of CP 600 mm long fixed with and including Chromium plated brass screws and wooden/ plastic cleats (min weight 190 gms) complete as specified and directed.

M&L 75mm dia PVC floor trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete as specified and directed.

S&F 110mm bore PVC (SWR) rain water, soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete as specified and directed

S&F 75mm bore PVC (SWR) rain water, soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete as specified and directed

S&F110mm bore PVC (SWR) branch pipe, single Y equal or unequal with access door complete all as specified.

S&F 75mm bore PVC (SWR) branch pipe, double Y equal or unequal with access door complete all as specified and directed.

S&F PVC ( SWR ) vent cowl suitable for 110 mm bore pipe complete all as specified and directed.

S&F viterious china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and fixed complete as specified and directed

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) but including connection to trap, and to flush pipe, anti-Syphonge pipe,and incl trap set in lime concrete etc complete including making good to floor complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back, size 450 X 300 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread, min weight 32mm-45 Gms/40mm-60Gms) complete as specified and directed

S&F 125 mm size shower rose, brass chromium plated with or with out swivel joint including fixing to steel pipe or union complete all as specified.

S&F 10 litres capacity PVC valveless syphonic action type flush cistern low level white with inlet ball valve float & handle including brackets and flush pipe of polythene of low or high density 32mm dia for low level cistern complete all as specified and directed

S&F 15mm dia bore angle stop valve, cast copper alloy, chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.

M&L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed.

M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in door / window cills, lintels, bressumer, stps, quoin block, coping, kneelers, apex stones, bed plates, bed blocks, bonders and the like with plain fair including chamfers, weatherings, throating etc and setting in cement mortar (1:6) complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete,as specified and directed.

S&F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete,as specified and directed.

S&F 100mm long steel butt hings medium weight cold rolled mild steel & fixed to chowkats complete,as specified and directed.

S&F 200 mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt complete,as specified and directed.

S&F 150 mm size Aluminium handles, cast type anodised handles oval type, stove enamelled black complete all as specified.

S&F mild mteel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete,as specified and directed.

M&L preparation of new wood or wood based surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40 & fixed with stainless steel wire staples complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) on internal surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls in cement mortar (1:4) mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured & paid for separately at supply only rate.

Supply only intergal water proofing compound complete all as specified and directed by Engr-in-Charge

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing new concrete surfaces of roof slab cleaning with wire brushing, removing of all foreign materials, watering etc and providing water proofing treatment as specified below:- (a) Providing 10mm thick plastering in cement mortar (1:4) mixed with & including water proofing compound as per manufacturers instructions on roof slab, finished even and smooth while the concrete is green. (b) Applying bituminous primer @ 0.50 Kg/Sqm confirming to IS 3384-1965 on dried and cleaned plastered surfaces of roof slab. (c) Applying a coat of hot blown bitumen of 85/25 grade as per IS 702-1988 @ 1.20 Kg/Sqm over primed surfaces. (d) Laying APP Membrane polymeric water proofing membrane 3mm thick and weight not less than 3.00 Kg/Sqm with non woven polyster reinforcement and bonded completely to the base with overlaps as specified and fused by flame as per manufacturer's instructions. The minimum overlap shall be 75mm at sides & 100mm at the ends. (e) Applying a layer of blown bitumen 85/25 garde @ 1.20 Kg/Sqm and dusted with blinding material such as dry sand @ 0.50 to 1.00 Kg / Sqm. (f) M&L for laying 40mm thick brick tiles over & including 15mm thick screed bed or bedding layer in cement mortar (1:4), jointed & pointed in cement mortar (1:4) mixed with & including linseed oil @ 5% by weight of cement in mortar required for screed bed and pointing to the brick tiles. (g) Carryingout ponding test by filling water for a period of 72 Hrs after completion of curing period complete all as specified and directed.

M&L for 75 mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection / path complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 150mm door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring & rubber shoe, fixed to door shutter complete as all as specified and directed.

S&F vitreous china urinal bowl type or half stall pattern white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union for dischargemm-45 Gms/40mm-60Gms) complete as all as specified and directed.

M&L for 150 mm dia bore reinforced concrete pipe, class NP2, laid and jointed with collars in cement joint complete all as specified and directed.

M&L for concrete concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and completely surrounding pipe with concrete after they are laid, jointed and tested for 150mm dia bore of pipe complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms , moulds, mitred / stopped ends etc complete all as specified and directed. Note: Inner girth of channel shall be measured.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50 mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.

M&L for cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate as in roof kerbs or mud stops, benching in manholes, channels and the like, rounded or chamfered on edges including necessary formwork, moulds etc complete all as specified and directed.

S&F 15mm dia PVC connection 600mm long with PTMT nuts & washers at both ends complete all as specified and directed.

S&F 15mm dia bore brass CP wall mixer for mixing hot & Cold water, screwed down for iron pipes and fixed complete all as specified and directed.

S&F 60mm thick machine pressed M35 precast concrete interlocking paver block of any shape and size conforming to IS 15658 - 2006 with grey cement and pigment complete all as specified and directed.

M&L for new concealed type point wiring for one light/fan point controlled by one, one way switch with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified and directed.

M&L for new concealed type power point wiring for 16 Amps socket outlet on idependent board, controlled by one, one way 16 Amps switch with PVC insulated PVC unsheathed electric (FRLS) cable of size 2.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth continuity conductor, connected to earth dolly by providing lugs including non-modular type metal sunken boxes with 3mm thick hylam sheet top cover including necessary cutting for fixing switches, sockets etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade of adequate size with all conduit accessories in concealed wiring system complete all as specified and directed.

S&F switch piano flush type one way 6 Amps complete all as specified and directed.

S&F switch piano flush type one way 16 Amps complete all as specified and directed.

S&F socket 2 in 1, 5 & 15 Amps flush type complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F epoxy powder coated MCB distribution box double door SPN 8 way for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed

S&F MCB SPN 40 to 63 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.

S&F MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 Amps, 240 Volts in proper position all as specified and as directed.

S&F indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

S&F LED building light fitting 35 Watt 230 Volt AC oudoor type with driver and high pressure die cast aluminium hosing and heat resistant lamp bracket with impact and corrosion resistant including thermal management in multiple opticscomplete with IP 65/66 protection all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for sub main wiring with two runs of 4.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection pieces etc complete all as specified and directed.

S&F lamp holder PVC / polycarbonate type with & inclding LED bulb 9 Watt complete all as specified and directed.

S&F exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.

JYOT BUILDERS

ABC CONSTRUCTION CO

MISRA TRADING CORPORATION

Saket Traders

Abode Artisan Enterprises

awashyakta enterprises

Hindustan Power Corporation

His And Her Enterprises

M/S AVADH ENTERPRISES