Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹25.2 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | 2₹30.3 L+₹5.1 L (20.2%)Rejected-Finance 32 FATEH ENCLAVE OFFICERS ENCLAVE PHASE II PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹30.5 L+₹5.3 L (21.0%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹31.2 L+₹5.9 L (23.6%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹32.6 L+₹7.3 L (29.1%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
8 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MAJOR ANIMESH TRIPATHI
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
MISC REPAIRS TO CERTAIN E M INSTALLATIONS AT OLD CANTT UNDER AGE B R II OF GE N PATIALA
2022_MES_537252_1
GE(N)/PAT-42/2022-23
Open Tender
Civil Works
Item Rate
210 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹60,000
Yes
1 Sept 2022
11 Jul 2022
10 Aug 2022
11 Jul 2022
8 Aug 2022
25 Jul 2022
Amount
Taking down cement plaster on brick walls built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc. including hacking for key, scrubbing down with water etc complete all as specified and directed.
Cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement including WPC complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparing new surfaces of wall and applyting three coat of white washcomplete all as specified and directed.
M&L for preparing new surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified and directed.
M&L for preparing old surfaces of wall and applyting three coat of white wash complete all as specified and directed.
M&L for preparing old surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified and directed.
Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.
Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer including acrylick thick wall care putty 1.5 to 2.5mm thick complete all as specified and directed.
Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer acrylick thick wall care putty 1.5 to 2.5mm thick complete all as specified and directed.
Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roofprojections/ cantilevers/ balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer including and over acrylic thick wall care putty 1.5 to 2.5mm thick complete all as specified and directed.
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.
Brick work with sub class 'B', old size bricks, designation 100, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for cement concrete reinforced, all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in sub base of path or hard standing 100mm thick complete all as specified and directed.
M&L for rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thcik with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor complete all as specified and directed.
M&L machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50 % red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 grade and including filling of interstices with fine sand over including 25mm thick layer of sand cusion over 75mm thck PCC 1:4:8 type D-2 (40mm graded stoen agg), complete all as specified and directed.
M&L for 20mm thick granite (of any type) (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs, paddings or mud stops rounded or chamfered complete all as specified and directed.
Dismantling of post or struts (wood or RCC) any section incl taking embeded portion and making good distrubed ground embeded in concrete complete all as specifieid and as directed.
Dismantling of barbed wire fencing in any size and poisition complete all as specified and directed.
Excavating in post holes in soft/ loose soil (or similar holes) each n exc. 0.5 cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts ; angle posts and struts in fencing including cutting tops to shape as directed, driliing holes, notching for wire, etc: flat iron fillets (for securing wire mesh etc). including all necessary drilling, bolting or riveting, etc. and similar work complete all as specified and directed.
S&F chain link fencing comprising plain GI wire mesh 3.15mm dia and aveage size of mesh 100 x 100mm , including link wire nails, straining bolts etc and provision of binding wire as specified after taking out old unserviceable mesh wire of any description complete all as specified and as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not, exc 5cm but n exc 10 cm of dia 10mm complete all as specified and directed.
S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for preparation of surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide complete, all as speciifed and directed.
M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed by Engr-In-Charge.
M&L for mild steel frame work as in gate, doors including cast iron ornament and designs etc complete, all as specified and directed. Note : Gate will be hanged on support of pintle hinges complete all as specified and directed.
S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed.
S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
SWAMI ENGINEERS
m/s panchmukhi builders
DELTA CONSTRUCTION CO
RUPINDER SINGH SODHI
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .