e-NIT No.06 / (EnM)M-VIII/ 2025-26, Item No.13

S/O horizontal split casing pump with impeller, Neck Ring and casing (CI), shaft & sleeve as per in standard fitted condition suitable for head 34 mtrs, discharge 210 m3/hr. Make: Kirloskar/ M&P/DJB approved make.

S/O IE2 Totally enclosed fan cooled squirrel cage flame proof Induction Motor of 40 HP, 1450 rpm, suitable for operation on 415+/-10% V, 3 phase, 50 Hz +/- 5% AC supply with ambient 45 to 50 degree Celsius ambient, Class F insulation with temperature rise limited to class B. Make :-Seimens/CG/Kirloskar/DJB approved makes.

Supply of nuts bolts and washers as per site requirement.

Supply of neoprene packing as per site requirement.

Supply of Sluice Valve of size 250 mm , PN 1.0. Make – Kirloskar/IVC/ DJB approved makes..

Fabrication of MS Base Frame made from MS Chanel size 100mm x 50mm cross support and also fixing with MS vertical support U channel the foundation bolt to absorb the vibration and 4nos drilling as per existing site required.

Providing & Fixing of foundation bolt.@ 4nos. as per site requirement.

Fabrication of MS tapper of Suction and Delivery side with D/F for the Pumpsets as per site requirement.

S/F pressure gauge along with gauge cock, copper/ G.I. tubing soldering etc as required. Make: Febig / HGuru.

Making the foundation with the help of civil material of CC in ratio 1:2:4 with a one feet depth below the pump house surface level, Fixing of SS foundation bolts as in pocket by proper welding to MS jaal of RCC with proper support etc. @ 4nos.

Fixing of MS Base frame made out of MS channel on the CC foundation and tightening the foundation nut and bolt. With the help of heavy manual labour and tripod with all tools and tackles required to complete the job.

Installation and fixing of the new pump and motor on the base frame including couple the pump and motor with new coupling set as required, joining the pump with suction/ delivery line with the help of new MS tappers on both side. Fixing of existing Valves of Suction & delivery sides, Non return Valves and delivery header side 250 mm sluice valve, with nut & bolts, packing, etc. as required to complete the job. The job also include the laying of existing cable, making connection the motor from starter/panel etc. i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load in the presence of Engineer-in-charge with full satisfaction.

M/S.SUPER TRADERS & ENGINEERS (BID ID -1598361)