Repairing and Maintance of meeting hall of Karmik Office Situated in First floor of Head offfice of Kanpur Nagar Nigam Motijheel.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (DSR : 14.1.2)

Scraping of old white or colour wash including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meters (200 feet)

Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work.

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorarated wall surface to give even shade over @ 1.25 Ltr/10Sqm including one coat of primer applied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat.

Wall panelling with PVC panelling all labour and Material Complete (MR)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (GI Metal Celling Lay Plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum) including factory painted after beding.)

Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small article not exceeding 0.10 sqm in area with superior synthatic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. every coat of paint after first coat.

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA

Electrical work with new wiring fittings switches boards and other things all complete with labour and material

Providing and fixing of blinds on window including all fixtures and arrangement etc all complete. (MR)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Supply of labour (semi skilled ) For shifting Furniture and Almiraah etc all completion of work.

Providing and fixing of MS Safe (premium) with locks Partitiions completed with all necessary fittings and all type of labour works and priming and painting all complete (M/R)