RE-TAPING AND REPAIRING OF CHARPOY GI PIPE WITH NYLON NEWAR, BED PLYWOOD TOP ETC AT BABINA CANTT UNDER GE BABINA

Amount

CHARPOY GI PIPE (FD-220) : Nylon Newar :- M&L removing unserviceable nylone newar from charpoy GI Pipe and retaping with approved Nylone newar shall be 50 to 55mm wide white/light colour 1st quality not made out from recycled nylon and weight of nylon newar shall be 1.5 Kgs of each charpoy. Weaving shall be done both sides by over lapping alternate bands to over the rails all round nos of bands shall be 32 to 34 (vertical) and 13 to 14 in horizontal, tightning complete charpoy ie loose checknuts ,elbows,Long Rails and short Rails complete all as specified and shown on drg.

CHARPOY GI PIPE (FD-220) : Long Rail :- Re-threading and fixing and elbow after removing and cutting the long rail wherever required all as shown on drg and as directed. Threading shall be done 22mm long at one end and 52mm long at other side and re-assembling of GI Charpoy as per drg and as directed by Engineer-in-Charge.

CHARPOY GI PIPE (FD-220) :Short Rail :- Re-threading and fixing with elbow after removing and cutting the short rail wherever required all as shown on drg and as directed. Threading shall be done 22mm long at each side and re-assembling of GI Charpoy as per drg and as directed by Engineer-in-Charge.

CHARPOY GI PIPE (FD-220) :Legs :- Re-threading and fixing with elbow after removing and cutting the leg wherever required all as shown on drg and as directed. Threading shall be done 22mm long at one end re-assembling of GI Chorpoy as per drg and as directed by Engineer-in-Charge.

CHARPOY GI PIPE (FD-220) :- M&L Removing old unserviceable long rail from GI pipe Charpoy and supply and fixing new long rail of size 1884mm long made out of 32 mm bore medium grade GI Pipe duly threaded one side upto 22mm long at end and other side to 52mm long and re-assembling of GI charpoys after replacement of UNSV long rail complete all as specified and as directed by Engineer-in-charge. Note ;- 1. The items includes threading both sides in new long rail also. 2. Old unserviceable long rail obtained shall be reused in Item No 6 below. Make : PRAKASH/TATA/JINDAL

CHARPOY GI PIPE (FD-220) :- M&L for removing old unserviceable short rail from GI Charpoy and converting long rail into short rail and fixing new short rails of size 804mm long retreved vide item No 5 here-in before duly thereded 22mm long on both ends fixing to charpoy complete all as specified and directed.

CHARPOY GI PIPE (FD-220) :- Converting short rail into leg (Obtain from Sl No 6 here-in-before and fixed complete to Charpoy GI pipe duly threaded 22mm long of the Leg and encluding 3mm thick MS sheet( made to shap of the bottom) in bottom as shown on Drg by welding complete all as specified and directed by Engr In Charge

CHARPOY GI PIPE (FD-220) : Elbow :- M&L for Removing old unserviceable three way elbow and supply and fixing new elbow 32 mm bore,ISI marked & re-assembling of GI charpoys after replacement of broken elbow to charpoy GI Pipe , complete all as specified and as directed by Engineer-in-charge. Make : PRAKASH/TATA/JINDAL

CHARPOY GI PIPE (FD-220) : Check Nut : - M&L for Removing old unserviceable check nuts and supply and fixing new check nuts 32 mm bore 6mm thick to GI Charpoy, all as specified and as directed by Engineer-in-charge.

CHARPOY GI PIPE (FD-220) : MS sheet :M & L for replacement of 3mm thick MS sheet by welding to bottom of GI legs as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : MS Clamp: M & L for replacement of broken MS clamps FI 25mmx3mm made to shape & welded with legs duly painted in black paint mach upto the existing as per shown on drg. Make : SAIL/TATA/RINL/TISCO Or other approved make on list of E -In -Cs Br New Delhi

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Plywood :--S&F12mm thick plywood BWR Grade in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge. Make : Green ply /Century/Bhutan Board/ Archid Ply

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Long Rail :-S&F in repair new long rail 35mm x 90mm in section as per existing size of Bed of 1st class hard wood ( well seasoned teak wood ) including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge.(Each long rail will be measured as single unit)

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Short Rail : - All as per item No. 13, but short rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Head rest :- S&F in reapirs to head rest consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Foot rest : - All as per item No. 15 above but foot rest consisting of 22 x 75mm in section shisham battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of shisham wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge. Note : Wood shall be Ist class hard wood ( well seasoned teak wood )

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Stiffener : - S&F in reapirs to new stiffeners of size 40 x 60mm of Ist class hard wood ( well seasoned teak wood ) complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Plywood one side teak face for Head rest : S&F in reapirs to 4mm thick one side teak face of size 780 x 340mm outer and inner side including 12mm dia half cut teak wood beading of three side of head rest including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) :Plywood one side teak face for Foot rest :- S&F in reapirs to 4mm thick one side teak face plywood of size 780 x 180mm outer and inner side including 12mm dia half cut teak wood beading of three side of foot rest including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge. ake of plywood : Green ply /Century/Bhutan Board/ Archid Ply

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) :Flat iron: S&F Flat iron size 150x35x5mm made to shape as per drg to be fixed with 6 nos of screw wood steel 35mm long ISI marked duly painted with Ist quality synthetic enamel paint black over a coat of wood primer of each corners of Bed Hard/ Bed plywood top all as specified on drawing or as directed by Engineer-in-charge.Make of steel : SAIL/TATA/RINL/TISCO Or other approved make on list of E -In -Cs Br New Delhi .make of synthetic enamel paint : Asian Paints/Nerolac/Berger/Shalimar/Johnson & Nicolson

BED HARD/BED PLY TOP (1980mmx900mmx660mm (FD-246/ 247 ) : Polishing :- Material and labour for preparation of old existing polished surfaces, new replaced parts of Bed hard/ Bed plywood top by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD- 258, 281, 373 & FD/MAP-II/02) :Foam Cushion :-Supply of foam cushion size 558mm x 533mm x 100mm , 40 density duly covered all over with tapestry cloth superior quality not less than Rs. 350.00 per mtr as approved.A suitable chain with hook and runner of approved quality to one side of cushion shall be provided of required length as directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) Proof of rate ie purchase Vrs must be submitted by the contractor Make : Make- Sleepwell/Kurlon/Dunlop

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Leg :- M&L for Removing the existing unserviceable front leg from Sofa and providing new leg of size 70mm x 35 mm x 300mm of Ist class hard wood ( Well seasoned wood ) shisham wood rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Rear Leg :-M&L for Removing the existing unserviceable rear leg from Sofa and providing new leg of size 70mm x 35 mm x 300mm Ist class hard wood ( Well seasoned wood ) rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Arm Rest : - M&L for Removing existing unserviceable Arm rest from Sofa and providing new Arm Rest of size 35mm x 70mm x 725mm Ist class hard wood ( Well seasoned wood ) rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : - Side Rail :- M&L for Removing existing unserviceable side rail from Sofa and providing new side rail of size 35 mm x 100mm x 725mm Ist class hard wood ( Well seasoned wood ) rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Bearers : - M&L for Removing existing unserviceable bearer from Sofa and providing new bearer of size 40mm x 40mm x 725mm Ist class hard wood ( Well seasoned wood ) rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Battens :- M&L for Removing existing unserviceable battens from Sofa and providing new battens of size 50mm x 20 mm Ist class hard wood ( Well seasoned wood ) , rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Rail of 3 Seater : - M&L for Removing existing unserviceable front rail from Sofa three seater and providing new front rail of size 35mmx 100mm x 1590 mm sheesham wood rest all as shown on drg and as directed by Engr-in-Charge.

SOFA SET 4/ 5 PERSON WITH CUSHION (FD-281, 373 ) : Front Rail of Single Seater :- M&L for Removing existing unserviceable front rail from Sofa single seater and providing new front rail of size 35mm x 10mm x 530 mm Ist class hard wood ( Well seasoned wood ) rest all as shown on drg and as directed by Engr-in-Charge.

Sofa set 5 Seater ( FD-258) : Arms Rest :-Supply and fixing arms made out of well seasoned teak wood free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Plywood for seat ( 3 seater) : Supply and fixing plywood commercial 12 mm thick BWR grade in one piece after taking down the old /broken one and providing new ply suitable for seat of sofa set 3 seater.Rest all as specified in drg and as directed by Engr-in-charge. Make : Green ply /Century/Bhutan Board/ Archid Ply

Sofa set 5 Seater ( FD-258) : Plywood for seat ( Single seater) : Supply and fixing plywood commercial 12 mm thick BWR grade as approved in one piece after taking down the old /broken one and providing new ply suitable for seat of sofa set single seater.Rest all as specified in drg and as directed by Engr-in-charge. Make : Green ply /Century/Bhutan Board/ Archid Ply

Sofa set 5 Seater ( FD-258) : Back rail of 3 seater : Supply and fixing back rail made out of Ist class hard wood (well seasoned teak wood ) free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Back rail of single seater: Supply and fixing back rail made out of Ist class hard wood ( well seasoned teak wood ) free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Front rail of 3 seater : Supply and fixing front rail made out of Ist class hard wood (well seasoned teak wood ) free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Front rail of single seater : Supply and fixing front rail made out of Ist class hard wood ( well seasoned teak wood ) free from cracks and knots, sapwood and other blemishes duly finished after removing the old /broken one as per drg and as directed by Engr-in-charge.

Sofa set 5 Seater ( FD-258) : Cushion for back : Supply and fixing foam cushion to back of sofa set of size 530x520x100mm , 40 density duly covered all over with tapestry cloth superior quality not less than Rs. 300.00 per mtr as approved over base of plywood commercial 9 mm thick in one piece shall be fixed to the back of the sofa set after removing the old one and as directed by Engr-in-charge and as per drg. Make of Plywood : Green ply /Century/Bhutan Board/ Archid Ply Make of Foam - Sleepwell/ Kurlon/Dunlop

SOFA SET 4/ 5 PERSON WITH CUSHION (FD- 258, 281, 373 & FD/MAP-II/02) :cover for Cushion :-Supply in replacement of cover for foam cushion size 558mm x 533mm x 100mm , made out of best quality tapestry cloth superior quality not less than Rs. 350.00 per mtr as approved.A suitable chain with hook and runner of approved quality to one side of cover shall be provided of required length as directed.

SOFA SET 5 PERSON WITH CUSHION (FD- 258, 281, 373 & FD/MAP-II/02) : Polishing :- Material and labour for preparation of old existing polished surfaces, new replaced parts of Sofa set 5 Person by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

SOFA SET 4 PERSON WITH CUSHION (FD-281, 373, 258 & FD/MAP-II/02) : Polishing :- All same as per ser item No-40 above but Sofa set 4 person .

HINDUSTAN ENGINEERING WORKS