REPAIR MAINT OF DAMAGED UNSV WATER SUPPLY MAIN PIPELINES ALONGWITH CONNECTED WORKS, REPLACEMENT OF DI PIPELINES CONNECTED WORKS, REPAIR/ MAINT OF WATER SUPPLY DISTRIBUTION GI PIPELINE CONNECTED WORK AT KHOJATOLI, REPAIR REPLASTERING INCL PAINTING

M & L for preparing old plastered surfaces of wall and and applying one coat of distemper oil emulsion, white or tinted complete all as directed.

Description all as per Ser item No 1 above but on ceiling

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete.

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed

M & L for complete removal of existing surface and applying two coat of cement base paint over one coat cement primer on walls, etc white or tinted complete a directed.

M&L for preparation of New/old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed.

Description all as per Ser item 06 above, but applying two coat of synthetic enamel paint white or tinted complete all as directed.

M&L for preparation of New/old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed.

Dismantling Wall and ceiling boards of any description and any thickness including cover fillets.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.