Special Repair and maintenance of fisheries building at Bitra

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6or richer mix

Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge. In Cement mortar.

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by machanical means incluaing stacking of serviceable and disposal of incluaing stacking of serviceable and disposal of unserviceable material within 50 metres lead as perdirection of Engineer-in-charge: In cement mortar

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of : Asbestos Sheet

Repairs to plaster of thickness12mm to 20mm in patches of area 2.5sq.metres and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : Cement mortar 1:4

Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required.

Providing and laying cement concrete 1:3:6 ( 1 cement: 3 M.Sand:6 granite chips ) all work up to plinth level.

Reinforced cement concrete work in beams, Suspended floors ,roofs,having slope up to 15 degree landings, shelves chajjas, lintels ,bands,plain window sills,staircase and spiral stair case up to floor five level excluding cost of centering and shuttering finishing and reinforcement.with 1:1.5:3 ( 1 cemet :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size ).

Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete..

Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)..

Brick work in super structure above plinth level upto floor five level..

12mm cement plaster 1:6 (1cement :6 metal sand)..

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position.

Providing and fixing 4mm Bamboo board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately):Bamboo board 4mm thick

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including SS but t hinges with necessary screws. FirstclassKarimaruthu or equivalent

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.250x16 mm

Providing and fixing anodised Aluminium towerbolt (barraltype) anodised transparent or dyed to required color and shade with bolts, nuts and screws etc complete.

Providing and fixing anodised Aluminium Handles anodised transparent or dyed to required colour and shde with necessry screws ect complete.a) 125 mm (Full Cost)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying wall putty of2mm thickness over plastered surface to prapre the surface even and smooth complete.(Birla white/ Berger Bison/ JK)

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.(Berger/Nerolac/ Asian paint)

French spirit polishing: two or more coats on one coat wood celer on old work.

Providing and laying vitrified floor tiles (premium quality)in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and confirming to IS:15622 of approved make in all coloures and shades,laid 20mm thick cement mortor 1:4 (1 cement :4 M.sand )including griouting the joints with white cement and matching pigments etc.complete(flooring) size of tiles 800x800mm.(Polished vitrified tiles-Khajariya/ Jhonson / Bell/Zeal top.

Providing and laying vitrified wall tiles (premium quality)in different sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08% and confirming to IS:15622 of approved make in all coloures and shades, in skirting riser of steps,over 12mm thick bed cement mortor 1:3 (1 cement :3 M.sand )including griouting the joints with white cement and matching pigments etc. tiles size of 800x800mm.(Polished vitrified tiles-Khajariya/ Jhonson / Bell/Zeal top.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)dia .Pipes.

15 mm nominal bore

20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

a) 15 mm nominal bore

b)32 mm nominal bore

Providing and fixing nominal guage PVC pipe of approved quality complete with special flang compression type fittings including trenching and refilling etc.External Work

110 mm diametre

75mm diametre

Providing and fixing C.P. Brass bib cock of approved quality and manufacture complete.15 mm nominal bore .(cera/Hindware/parryware)

Providing and fixing C.P. Brass stopcook of approved quality and manufacture complete.20 mm nominal bore.(cera/Hindware/parryware)

Providing and fixing G.M. full way wheel valve of approved quality and manufacture complete.32 mm nominal bore.(Zoloto/leader)

Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required White vitrous china wash basin 550x400x15mm Cp Brass piller tap.(cera cognac type model No.1011/hindware/parry ware)

Providing and fixing mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. ( Cera model No 5561 size 700x500mm ).

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed fritting arrangement of approved quality and colour600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm ,weighing not less than 190 gms. West side chejja. (cera / Hindware / parryware)

Providing Aluminium sheet roofing fixed with . galvnized iron Jor L hooks and 8mm dia C.I plain bitumenwashers complete excluding the cost of purlins, raftersand trusses corrugated sheet 0.56mm thick.

Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.(Sail/Tisco/Gindal)

Mohammed Basheer Ahamed CH

ABDUL KADER KOYA M C

MOHAMMED RIHAN