Construction of BSE Odisha Cuttack Such as Supply Installation testing and commissioning of Gplus2 6 Passengers lift Buildings

Supply,Installation, Testing & Commissioning of (Machine Room-Less) Auto Elevator 6(Six) Passenger CAPACITY (KGS) / SPEED : 6 PEOPLE (408 kg)/ 1 Mtr per Sec, RISE (m)/ PIT/ HEAD-ROOM : 13.5 Mtr/700MM/4500MM, FLOOR DESIGNATIONS : G, 1, 2, NUMBER OF STOPS : G, 1, 2 ( 3 Stop), SHAFT WALLS / CLEAR INSIDE SHAFT : CONCRETE /1600 mm WIDTH x 1750 mm DEPTH, CAR SIZE (W X D X H -MM : 1100 MM (W) X 1000 MM(D) X 2150 MM (H), POSITION OF MACHINERY : TOP OF THE RAIL, DRIVE SYSTEM : ALTERNATING CURRENT VOLTAGE FREQUENCY, TRACTION MEDIA : 3/8 MM (6 CORE) ROPE/ FLAT COATED STEEL BELT (USHA MARTIN), CAR FINISH : CAR WALL FINISH IN STAINLESS STEEL HAIRLINE FINISH, REAR MID STAINLESS STEEL HAIRLINE FINISH WITH BACK SIDE CLEAR GLASS, STAINLESS STEEL HAIRLINE FINISH CEILING, LED, BLOWER & HAND RAIL, ANTI SKID VINYL FLOORING,LANDING DOORS : AUTOMATIC LANDING DOOR WITH STAINLESS STEEL HAIRLINE FINISH, CENTRE OPENING. (WITTUR GERMAN), CAR DOORS : AUTOMATIC CAR DOOR WITH STAINLESS STEEL HAIRLINE FINISH, CENTRE OPENING. (WITTUR GERMAN), CLEAR OPENING OF DOORS : 700 MM (W)x 2000 MM (H), MOTOR : 5.5 HP 9 AMP, 1:1 ROPE, 440V,50 Hz PMSM GEARLESS (SICOR MAKE IN ITALY.),DOOR OPERATOR : MDS1 ECO+ DOOR DRIVE WITH INTEGRATED RECLOSING SYSTEM, OPERATING PANEL : VISUAL CALL CONFORMATION &CAR POSITION INDICATOR, DOOR OPEN & DOOR CLOSUER BUTTON IN COP, STANDARD FEATURES : INFRARED CURTAIN DOOR PROTECTION, CLOSE LOOP CONTROL SYSTEM, SELF DIAGNOSTIC CONTROL, DIGITAL SHAFT LEARNING, OVER SPEED GOVERNOR, OVERLOAD PROTECTION, EMERGENCY FIREMENS SERVICE, AUTO BLOWER CUT OFF, EMERGENCY ALRAM BUTTON, MANUAL RESCUE OPERATIONS, ACVVF CLOSE LOOP DRIVE, DOOR TIME PROTECTION, MOTOR OVERHEAT PROTECTION, PHASE FAILURE & PHASE REVERSAL PROTECTION, FIREMAN CONTROL FUNCTION SYSTEM, BRAILLY ON PUCH BUTTON, ENERGY SAVING MODE, RE LEVELING AND DOOR PRE-OPENING, ROLL BACK PREVENTATION AT START THROUGH PRE TORQUE & ANTI ROLL BACK FUNCTION, HIGH STOPPING ACCURECY, SHORTER TRAVELL TIME IN COMPARISION TO STANDARD VVVF SYSTEM, VOICE SYNTHESIZER, INTERCOME COMMUNICATION SYSTEM, RFID FLOORACCESS CONTROL SYSTEM, OPTIONS INCLUDED : AUTOMATIC RESCUE OPERATION ARD, AUDIBLE ALERT DURING POWER FAILURE, AUTOMETICALLY TURNS ON WHEN SUPPLIED FROM THE LINE INPUT, BATTRY UNDER VOLTAGE. (OVER DISCHARGE PROTECTION), LIGHT POWER SUPPL VOLTAGE : 240 VOLT,POWER SUPPLY NEEDED : 440 VOLT with all Civil Construction for installation of Lift (Including Civil Construction: (I) CONSTUCTION OF ELEVATOR PIT W 1600 MM X D 1750 X H 900MM Construction of pit base & wall with RCC 25mm grade of thickness of 300mm, (II) CONSTRUCTION OF ELEVATOR SHAFT WITH STRUCTURE: WITH MS SQUARE PIPE(W 1600MM X D 1750MM) Supplying fitting and fixing of M S Rectangular/square pipes for construction of elevator shaft of grade YST310 including cost ,conveyance & taxes of all materials & labour etc ,(M S PUT UP TRULEX), (III) COVERING OF HPL SHEET : Providing ,Fabricating and supplying and fixing of HPL cladding of in pan shape in as per choiced colour of approved shade made out of 4mm thick HPL material consisting of 3mm FR grade mineral core sand witched between two aluminium sheeds(0.5mm)thick, the HPL PANEL cladding sheet shall be coil coated with Kynar 500 based PVDF/lumiflon based fluoropolymer resin coating of approved colour,and shade with 25x50mm rectangular shape aluminium section etc, (IV) COVERING OF TOUGHEN GLASS 10MM: 10MM clear toughen glass will fitted with appropriate stainless steel aritechtural bracket at back side of the shaft) and Electrical accessories for commissioning of lift (like Panel , Cable, Lights etc) Complete in all respect as per direction of Engineer in charge.The Elevator should be suitable for physically handicapped person. (Make OTIS/ Thyssenkrupp/Schindler/Mitshubishi or equivalent technical specification)