REPAIR OF BRICK DRAIN PLASTERING FENCING CHEQURED TILES AT KB LINE, MP LINE, SP LINE AND GWALIOR ROAD UNDER AGE B/R-II OF GE (E) AGRA

Amount

S&F in repairs galvanised, 2 stand steel barbed wire 2 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts incl, securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins and around any type of pipe etc as directed (each line wire to be measured) complete all as specified and directed.

Dismantling fencing wire mesh, chain link any type and any size etc complete all as specified and directed.

Supply only GI chain link fencing any size or any type complete all as specified and directed.

Fixing only G I chain link fencing of any mesh, size and to any type fixing with flat iron and nut bolts etc complete all as specified and directed. Note :- Flat iron will be measured and paid separately.

S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending hooking ends and binding and fixed with flat iron alongwith fixing with chain linkfencing etc complete all as specified and directed.

S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 50mm and dia of shank 8 to 10 mm dia etc complete all as specified & directed.

Demolition of Reinforcement Concrete of any description and in any position etc complete all as specified and directed.

M&L providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) (nominal mix) for cover slab for manhole, drain and similar articals with plane faces complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m in soft/loose soil, getting out, returning, filling with PCC ( PCC will be paid under separate items ) complete all as specified and directed.

Dismantling of wooden / PCC fencing post of any description etc complete all as specified & directed.

S & F angle iron as in post and struts in fencing including embeding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified & directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preperation of surface complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

M&L for one coat of synthetic enamel paint on previously treated/ untreated old steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc including removal of spoil etc complete from drain. (No extra payment shall be claimed on this account)

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item no 18.00 above but except brick (using old brick).

M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface even and smooth complete all as specified and directed.

M&L, rendering 15 mm thick in CM 1:4 on surface other than fair faces of brick work or concrete surface and finishing surface even and smooth complete all as specified and directed.

M & L for two coat of cement base paint on new / old plastered surfaces of wall over one coat of alkali resistant primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly / old plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Demolition of cement concrete of any description and any position etc complete all as specified and directed.

M&L for PCC 1:3:6 type B2 (using 40mm graded Agg) as in surface channel and drains manhole etc complete all as specified and directed.

M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chain link fencing etc all as directed incl necessary formwork etc complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Dismantling of structural steel work incl. doors , gates etc complete all as specified & directed.

S&F Framed and hung as in doors or gates of angle or other section with gusset plates, rails, braces incl. pintle hinges , stops hand made sliding bolts etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing completeall as specified and directed.

M&L for 1.00mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed with screw/ welding (Size of hinges in 100 mm) complete all as specified and directed.

Dismantling floor, hearth wall tiling, granite including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 75 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed.

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately.

M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified and directed.

M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 22 mm thick factory made set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3Kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement:1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified, (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove completed as per specifications and directed.

S&F Steel work in hollow round /square pipes as in trusses, purlins rafters including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. as in gate fencing complete all as specified and directed.

KARVI ASSOCIATES

M/S Solanki Brothers

m/s shanti consruction co

C P Singh and Co

RAJEEV CONSTRUCTION

M/s J S & SONS

Balaji Associates

M/s Kok Singh Sisodia

VARDMAN ENTERPRISES

m/s Agra Builder

M/S RADHEY GOVIND ENTERPRISES