Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹54.5 Laccepted-aoc | ₹54.5 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
11 Mar 2026, 9:30 pmClosed
Engineering Wing of Health and Family Welfare Department
Sri. Chandu Kumar
Repairs and Renovation to 108 Ambulance Service Call Center at Siddaiaha Puranik Road, Bengaluru
EWHFWD/2025-26/BD/WORK_INDENT1956
EWHFWD/2025-26/BD/WORK_INDENT1956
Open
Buildings
Two Tender Document System(Two Cover)
EWHFWD Executive Engineer Office Bengaluru
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
The Tenderer or his identified sub contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/KUWS&DB and should have executed similar water supply/sanitary engineering works totalling Rs. 1.71 Lakhs in any one year in the last Five year.
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/Government electrical Inspectorate and should have executed similar electrical works totalling Rs. 8.29 Lakhs in any one year in the last Five year.
Executed in any one year, the following minimum quantities of work: 1) Plastering 160.00 Sqm 2) Flooring -Ceramic / Vitrified Tiles / Granite / Dadoing 480.00 Sqm 3) Painting 3600.00 Sqm 4) Water proofing to roof 560.00 Sqm
The Mandating satisfactorily completion as a prime contractor for at least one similar work i.e. related to Repair & Renovation work to any building of value not less than Rs. 38.11 Lakhs
GST Registration Certificate
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity- (AxNx2.5-B) where, A-Maximum value of civil engineering works executed in any one year during the last five years. N-Number of years prescribed for completion of the works for which Tenders are invited. B-Value of existing commitments and on-going works to be completed during the next 4 months
KPWD Class-III & Above Civil Contractor
Liquid assets and/or availability of credit facilities of no less than Rs. 22.87 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,)
The tenderer should have been Achieved in at least TWO financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value Rs. 76.22 lakhs. In the last five year i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25
₹1,910
₹1.5 L
11 Mar 2026
4 Mar 2026
12 Mar 2026
7 Mar 2026
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet ---- Compl...
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal ...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Extra for removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scraches, cost of material, labour...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 300mm ---- Complete with all lead and lift loading a...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm ---- Complete with all lead and lift loading and...
Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete : 125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., wo...
Providing and fixing aluminium die cast body tubular type universal hy- draulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Handles 300mm ---- Complete with all lead and lift loading and unload...
old Terrace screed Repair with Uv Resistant waterproof coating - Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied,...
Providing and fixing double action hydraulic floor spring of approved brand manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with d...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti- tions by cutting a chase of appropriate width with...
Providing & fixing Glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick Glass panes including cost of materials, labour, usa...
supply and Installation of Multicell Standing Seam polycarbonate panels having flux 7.0 as per EN 16153 & EN ISO 10077-2. For min joints, panel shall be 1000 - 1200 mm wide with standing seam on both...
Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per ...
office push back chair ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work
Water Supply & Sanitary work
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Complete with all lead and lift loading and ...
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931. ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Providing and fixing unplasticised PVC connection pipe with brass unions : 30 cm length - 15 mm nominal bore ---- Complete with all lead and lift loading and unloading charges etc., work should be car...
Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 7...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g ---- Complete wi...
Providing and fixing PTMT extension nipple for water tank pipe, fittings
of approved quality and colour. - 15 mm nominal bore, weighing not less than 32 g ---- Complete with all lead and lift loading ...
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g. ---- Complete with all lead and lift loading and unloading charges e...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...
Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Flushing Cistern P.V.C. 10 lts capacity (low level) (White) (with fittings, accessories and flush pipe ---- Complete with all lead and lift loading and unloading charges etc., work should be...
Supplying fixing and comisioning of CP health facet hand operated spray unit ( instant type)Cp crutch including cost of all materials, loading ,unloading labour charges with all lead lift transportati...
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...
Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direct...
Dismantling tile work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to ...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Su...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Internal Electrification
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable formountingmodular switchplateswithdue groove cutting inBrick/C.Cwall, including necessary rawl plugs, Machine/NF scre...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable formountingmodular switchplateswithdue groove cutting inBrick/C.Cwall, including necessary rawl plugs, Machine/NF scre...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable formountingmodular switchplateswithdue groove cutting inBrick/C.Cwall, including necessary rawl plugs, Machine/NF scre...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- Complete with all lead and lift loading and unload...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- Complete with all lead and lift loading and unloading...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- Complete with all lead and lift loading and unlo...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32Amps DP switch ---- Complete with all lead and lift loading and unloading ...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket ---- Complete with all lead and lift loading and u...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ci...
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab....
Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Speci...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz &...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated ...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500...
Supply of round/square recess/surface mounted rolling type LEDDown light with ......WGU10 LED Lamp Rib Fabricated from diecast aluminium with white powder coatedprewired to mains connector &has swivel...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engin...
Supplying exhaust fan of 1440 RPMof 300mm(12") sizewith bracket blades complete for light duty suitable tooperateon230V 50Hz, AC Supply. ---- Complete with all lead and lift loading and unloading char...
Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm) ---- Complete with all lead and lift loading and unloading ch...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...
Supplying & Laying cable trays including welding, fixing of supports Cable tray of 300 mm width (suitable for cable duct of D type ---- Complete with all lead and lift loading and unloading charges et...
Supplyingof .. TRInvertor type splitAir conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser, latest R410A/ ...
Supplyingof .. TRInvertor type splitAir conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser, latest R410A/ ...
Installation charges for split type air conditioner with allied works for one indoor and one out door unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. ---...
Supplying and installation of insulated refrigerant coppertubingof 5/8" and 3/8"with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testingoil and gas c...
Data and Network
Supplying heavy gauge PVC conduit pipe …….dia ...... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., by groove cutting in wall and fixing by...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board 16-25 Amps 2 pole ---- Complete with all lead and lift ...
RJ45/ I.O. outlet Cat 6 ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work
Telephone socket ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work
Supplying and drawing UTP-CAT 6E LAN cable. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Ch...
Supplying & Fixing of I/O Socket with back box Single I/O ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction o...
Supplying & fixing of ..mtrs. Cat 6Patch Cable. 2Mtr ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engi...
Supplying and drawing PVC flexible 2 pair telepone unarmoured tinned copper cable. ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Speci...
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 20 Pair ---- Complete with all lead and lift loading and unloading charges etc., work should be carried ...
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 Pair ---- Complete with all lead and lift loading and unloading charges etc., work should be carried ...
Supply, Installtion, Testing and Comissioning of TELEPHONES Analog push button telephone with Caller ID, flash and radial ---- Complete with all lead and lift loading and unloading charges etc., work...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-3-1956-108 Call Centre.docx
Tender Document • 0.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .