REPAIRS TO ROOF, ROOF TREATMENT, JOINERY, FLOORING, SANITARY, PLUMBING, PLASTERING AND OTHER B/R ITEMS IN KARAM SINGH ENCLAVE, CENTRAL AMENITIES AND ADJACENT AREA IN AOR OF AGE B/R I AREA UNDER GE PANAGARH

Amount

M&L for resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge

M&L for resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Taking down chowkat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down chowkat or frame with shutters exc 1.50 Sqm and n.exc 4 sqm (without taking of shutter from frame) each complete all as specified and directed

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as spd and directed

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkat of size 50mmx125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade.), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in -Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately) Note :- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws , all as per direction of Engineer-in -Charge. (Note. Stainless steel butt hinges and necessary Stainless Steel Screws shall be paid separately)

All as per item No 07.00 above but wire gauzed i.e. panel will be of wire gauze in lieu of panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge .

M&L for Pieces with 1st class Hardwood , small let in for making good where hinges, etc. have been removed from chowkats or frames, joinery, etc. including painting or oiling to match, if required complete all as specified and directed.

S&F Beads in doors/window, straight (any size) for glazed/wire mesh or gauzed joinery made of 1st class Hardwood, renewed, including mitres etc and removing old beads to Store complete all as specified and directed .

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel Butt hinges 100mm long medium weight, cold rolled complete all as specified and directed

S&F 75mm long butt hinges, extruded aluminum alloy/stain less steel with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed

S&F aluminium anodised 75 mm barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

S&F 75 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F 300 mm mild steel ordinary rat tail rod pattern spring including roller and sollar plates complete all as specified and directed.

S&F in repair Brass CP bracket fancy type suitable for fixing of 20/25 mm dia curtain rods complete all as specified and as directed.

S&F in repair 25 mm dia Stainless steel curtain rod (Grade-302) complete all as specified and as directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150 mm complete all as specified and directed.

Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and directed

M&L for Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work for snake guard complete all as specified and directed.

S&F Block boards 18/19 mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face complete all as specified and directed.

S&F Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Repairs to aluminium doors, windows, ventilators etc by replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Repair cost of accessories upto Rs 100/- deem to be included for quoted rate)

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm complete all as specified and directed Make: Prayag/Nirali/Bluestar

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engr-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge.

S&F powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in- charge.

M&L for sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n. exc 0.50 sqm in each pan complete as directed.

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay,with glazing bars, dovetailed or welded complete all as specified and directed.

All as per Item No 41.00 above but with out glazing bars complete all as specified and directed.

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered and or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F in repair for 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

S&F ball bearing for rolling shutters complete all as specified and directed

Repair to steel rolling shutters area exc 5 sqm but n.exc 12 sqm etc, replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Note: Cost of spare parts upto Rs 1500/- deem to be included in quoted rates).

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

M&L for sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan complete all as specified and directed

M&L for 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

M&L for welding in repairs exc 2.5cm but n.exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm for windows and ventilators complete all as specified and directed

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necessary formwork complete all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

S&F framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed

S&F Mild Steel work as in framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed

S&F Mild Steel wind ties for roof including securing bolts complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Glazed ceramic tiles Coloured 350 x 250mm/450 x 350mm 7 to 8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over and including10 mm thick in CM (1:3) on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over and including screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surface such as skirtings etc. set and jointed in cement slurry over and including 10 mm thick rendering in CM 1:3 complete all as specified and directed Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

M&L for 9-10mm thick Vitrified Ceramic light shade tiles (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L for 9-10mm thick Vitrified Ceramic light shade tiles (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 10mm thick rendering cement mortar (1:3) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over and including screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed.

M&L for machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level and removing rubbish off the premises complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) finished the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick pre-polished chequered cement concrete tiles of size 30cmx30cmx25mm, set, jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over and including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed. Make : L&T/ACG/Lafarge/Shyam Steel Pvt Ltd

M&L for brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed. Make : L&T/ACG/Lafarge/Shyam Steel Pvt Ltd

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster in CM (1:6) on fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) complete all as specified and directed..

M&L for Rendering 15 mm thick cement plaster in CM (1:4) on other than fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound @ 3% by weight of cement content complete all as specified and directed. Note: WPC will measured and paid separately under relevant item of schedule.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in CM (1:3) finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc from the visible reinforcement by applying rust remover @ 20 ml per sqm or as per manufacturer's instruction, rust removal and cleaning the steel reinforcement properly and then applying 40 micron thick dry thickness coat of epoxy zinc primer @ 250 ml per sqm or as per manufacturer' s instructions of exposed and new steel reinforcement (measured flat) complete all as specified and as directed.

M&L for welding mild steel wire mesh weighing not less than 1 kg sqm and primed with Nitco zinc primer , fixing to the prepared concrete surface through proper fixing arrangements and applying 40mm thick average cement mortar with guniting /shotgun at a pressure not less than 4 kg sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including lapping of new reinforcement to the rusted portion all as per manufacturer's instructions and carried out the work as per procedures complete all as specified and as directed.

M&L for (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for preparation of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new stee surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n.exc. 10cm girth complete all as specified and directed.

S&F 20 mm outer dia CPVC, SDR 11 including CPVC SDR 11 plain/brass treaded fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as per Item No 93.00 above but 25 mm outer dia complete all as specified and directed

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve , chromium plated concealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed. Make:Nirali/Prayag/Bluestar

S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length 450 mm complete all as specified and directed

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and directed.

S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size, 550mmX400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265 mm white minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed..

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, commander (Sim Line) incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 mtr to 3 mtr as per tequred with cap complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable urinal (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair for Gun metal gate valve,15 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting , any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling board of any description complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified directed.

S&F powder coated anodised aluminium snap grid (605X605mm) frame work for false ceiling with all necessary aluminium angle & Tee aeeangement with and incl fixing cleats complete all as specified and directed.

S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws, complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 18mm to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M&L for PCC(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed.

M&L for 25 mm thick average PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete on roof all as directed by Engr-in-Charge.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete in CM (1:4) finished even and smooth without using extra cement and WPC complete all as specified and directed.

M&L for preparation ne surfaces of roof and applying two coats of Polyurethene (PU) acrylic based water proofing liquid compound (minimum 1.5 Ltr/sqm PU or manufacture instruction which are higher to be followed) over & including one coat of self priming primer @ one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge. Notes:- (i) As per description of theis item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethene(PU) acrylic based water proofing liquid compound & primer are required for roof treatment (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height. (iii) Roof treatment to be carried out by authorised applicator.

M&L for repairs to crack portion with jacktting technique, taking down the existing plaster up to brick wall surface of min 200mm wide, cleaning the loose particle on surface of brick work along the length of the crack and filling the gap/crack area with PCC 1:1.5:3 type A0 using 12.5mm aggregate up to brick surface and inserting the welded mesh of size 25x25x2mm dia along the crack on both sides of the wall surface fixed with , drilling holes 10mm dia on either side of the crack by means of drilling machine troughout the full width of the wall @ 25cm c/c and insert 8/10mm dia rod in the drilled holes, welded with horizontal rod to with hold the welded mesh and applying grit plaster 1:1:2 using 4mm and down aggregate finished even and smooth with out using extra cement . Note:- Reinforcement and welded mesh will be measured and paid separately.

Supply and applying Silicon sealant compound in required width of joints with a maximum depth of 50 mm of surface complete all as specified and directed. .

S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with PVC clamps for rain water pipes complete all as specified and directed.

S&F PVC SWR bends of 150 mm bore complete all as specified and directed..

S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps all as specified and directed .

S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint , laid in trenches or in floors complete all as specified and directed.

S&F PVC SWR bends of 110 mm bore complete all as specified and directed..

S&F PVC SWR bends of 75 mm bore complete all as specified and directed..

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified and directed

S&F as in repair grating square with waste hole 150mm size of PTMT(minimum 100 gms) complete all as specified and directed

Demolition of RCC of any description and in any position not otherwise specifically provided for including (reinforcement cut as per required to facilitate demolition) complete all as specified and directed.

M&L for TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for TMT mild steel bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for RCC (1:1.5:3) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc surface of concrete flat complete all as specified and directed

ANSH CONSTRUCTION

M/S N B SEN CONSTURCTION

M/S GLOBE ENTERPRISE

M/S BHATTACHARJEE ENTERPRISE