04/EE/BSNL/PCD/MHL/2021-22

Amount

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

a) One or more coats on old work

French spirit polishing

a) One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :

a) With cement mortar 1:4 (1 cement : 4 fine sand)

Renewing glass panes, with putty and nails wherever necessary:

a) Float glass panes of thickness 4 mm

Renewing glass panes and refixing existing wooden fillets/ Aluminium beading:

a) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)

Renewal of old putty of glass panes (length).

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :

a) With F.P.S. brick tiles

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-

(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits.

(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed withwater.

(iii) Chlorination of RCC internal surface by liquid chlorine.

(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.

(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

a) 10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

a) White solid plastic seat with lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (i) Internal work - Exposed on wall

a) 15 mm dia nominal bore

b) 20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying and fixing C.I. cover without frame for manholes :

a) 455 x 610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

a) With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing & fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge

a) Anodized (AC 15 ) aluminium

Non Schedule Items

Carrying out miscellaneous repair works (by carpenter) such as repairs to doors/windows/cup board shutters (wood or aluminium) by chiseling/ planing/ cutting/restting of existing door/window, replacing damaged wooden /steel members with new and providing new hinges/cleats if required all complete as per direction of Engineer-in-charge. All required material for replacement of damaged/non-operational item will be supplied by the department, all T&P shall be arranged by the agency. Note:- One person per day will be treated as one job.

Carrying out miscellaneous repair works/ maintenance works (by plumber) such as repair to low level PVC/ Chinaware Cistern internal fittings including fixing of required fittings, repairs to bib cock, stop cocks, pillar taps, PVC connections etc. by replacing washers or jumpers, restoration of interrupted water supply etc. all complete as per direction of Engineer-in-charge. All required material for replacement of damaged/non-operational item will be supplied by the department, all T&P shall be arranged by the agency. Note:- One person per day will be treated as one job.

Carrying out miscellaneous repair works/ maintenance works (by sewerman) such as cleaning the choked manhole/sewerline including rodding cleaning of floor traps/P-Traps/GullyTraps/Rain water pipes/ Water closets /vertical sewage stacks and disposal of sullage beyond MC limits/dumping ground etc. all complete as per direction of Engineer-in-charge. All T&P shall be arranged by the agency. Note:- One person per day will be treated as one job.

Supply of the following fittings/materials of approved quality including carriage to store/site complete as per direction of Engineer-in-charge.

a) Syphon, ball cock and actuating button complete internal kit for vitreous china wall mounted cistern

b) PVC overhead water tank covers with pivot and locking arrangement complete for 500 litre capacity tank

c) Brass bib cock of approved quality : i) 15 mm nominal bore

d) Brass stop cock of approved quality : i) 15 mm nominal bore

e) C.P. brass bib cock of approved quality conforming to IS:8931 i) 15 mm nominal bore

f) C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. i) 15 mm nominal bore

g) C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 i) 15 mm nominal bore

h) C.P. brass pillar tap for wash basin points i) 15 mm nominal bore

i) C.P brass swan neck pillar cock of approved brand and design for wash basin conforming to I.S standards complete i) 15 mm nominal bore

j) Gun metal gate valve with C.I. wheel of approved quality (screwed end) :

i) 15 mm nominal bore

ii) 20 mm nominal bore

iii) 25 mm nominal bore

k) Ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

a) 15 mm nominal bore

b) 20 mm nominal bore

l) Uplasticised PVC connection pipe with brass unions :

i) 45 cm length

b) 15 mm nominal bore

m) P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

(i) Semi rigid pipe -- 32mm dia.

n) C.P grating of approved quality -- circular type 100mm nominal dia with frame

o) Aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm

p) Aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 250x10 mm

q) Aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Cleaning terrace including cleaning of KHURRAS, removal of rank vegetations, grass etc. sweeping clean and disposal of malba outside compond to the municipal dumping ground all complete as per direction of Engineer -in- charge.

Removal of pipal tree from terrace, shafts, etc including labour and tools for cutting plants all complete as per the direction of E-in-Charge.

Repair of M.S door at all floors including removing from its position, repair of pivots, cutting of intruding M.S. ladder to required length, welding of supports, refixing and making in working condition, including cost labour and material all complete in the operation, and as per the direction of Engineer-in-Charge.

Replacing of Sensor-actuated flushing system in urinals with C.P. angle valve and PVC connection including cost of all G.I. fittings such as socket, reducer socket, nipple of required size and length and C.P.angle valve of approved quality including dismantling of Sensor-actuated flushing system, making hole in brick wall of required size and making good the same all complete as per direction of Engineer-in-charge. Note:- Cost of dismantled materials/fittings shall become property of the agency and will be credited to the agency.

Transportation of all office furniture and record (upto 3 Nos. tables of all sizes, 10 Nos. chairs, 3 Nos. steel almirahs of all sizes, 2 Nos. steel racks and all record/files etc.) including loading in Pick-up Truck from designated place in Chandigarh Tricity, transportation in Pick-up Truck upto a distance of 20 km, and unloading, lifting and placing at designated place upto 3rd floor of TE/ Admin Building in Chandigarh tricity including cost of all labour, material and transporation with provision of Tarpaulin to cover the furniture and record, all complete as per the direction of Engineer in Charge.

Repairing of Glass door by taking out shutter from floor spring, replacing worn out pivot, reassembling and fixing in position and making operation smooth, complete as per the direction of E-in-Charge.

Credit of old unserviceable materials

a) Hydraulic door closer

b) PVC low level cistern

c) Old brass dead lock/Mortice lock

d) Solid plastic seat with lid for W.C./ C.P jet

e) PVC waste pipe/PVC connection pipe/PVC tank covers

f) Brass bib cock/brass stop cock/gate vavle/ball valve

g) CP brass bib cock/CP brass angle vavle/CP brass jet/ syphon internal kit for vitreous china cistern

h) Old G.I pipes all diametres

i) Floor spring

j) Old Dismantled PVC Water storage tanks

RATTAN BUILDERS PVT LTD