ADDN ALTN TO OLD JCO OR MD ACCN AT MEERUT UNDER GE SOUTH MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed

M & L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6

M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base

M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masaonary wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arragement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of syntetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified.

M&L factory made gauged shutter shall be made out of angle iron 35x35x5mm and 25x25x5mm and 1.5mm thick, 10mm Square bars grill complete with stainless steel fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average with aperture including two coats of synthetic enamel paint over a coat of red oxide as shown on drawing all specified and directed by Engr-in -charge.

S&F for factory made 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed

Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed by Engr-in-charge.

M&L for powder coated aluminium anodised window sliding type (3 shutters type) with sash bars, aluminium sections weighing 0.55 Kg/m(min) including stainless steel wiremesh , necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame, with one or more rebates including S&F 5 to 6 mm thick black glass including taking down existing window all as specified & directed by Engr-in-charge.

Supply and fixing powder coated aluminium ventilator made out of hollow extruded aluminium sections as mentioned below half fixed with froasted glass and half portion with openable sutter glazed with tinted glass 5 mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150 mm long etc complete all as specified and directed by Engr-in-charge. Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x 15 x 1.60 mm Shutter side (handle) size 37.50 x 15 x 1.36 mm Chowkat bottom size : 50.30x26x1.20 mm Chowkat top & sides : 50.30x15x1.00mm Make (i) Anodised aluminium section : Jindal/HINDAL Co/INDAL Co (ii) Glass : SAINT GOBAIN/MODI GUARD/TATA

S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section.

S&F Mild steel sliding bolt 300 long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F mild steel barrel tower bolt stove enameled black with bright bolt 200 mm long.all as specified & directed

Supply and fixing mild steel pressed handles oval type stove enamelled black of size 125 mm complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) all as specified & directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.

M&L for 18 to 20 mm thick udaipur green Stone factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including moulding, pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including moulding, rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:4 all as specified.

All as per item No 30 above but factory made bull nosed as in riser of steps, skirting/dado laid over 10mm thick in cm 1:6 complete all as specified.

Material and labour for 18 mm thick Multi layer waterproof plywood (Make-Radium/sunrise or equivalent fixed with screws to timber frame work for cabinet car case both sides covered with o.80mm thick decorative laminates, "Mica" type 1 of surface finished , colour and pattern as approved fixed with approved adhesive as per makers instructions complete all as specified & directed.

S&F Auto hinges for cabinet case (Make ; KARF/HETICH) completed all as per specified and as directed.

S&F 150 mm size stainless steel bright finish handle for cabinet shutter completed all as per specified and as directed.

Supply and fix 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

S & F 25 mm stainless steel curtain rod with fancy type bracket.and ring complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

M&L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M&LPreparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M& L preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface

All as ser item No. 43 above but one coat on old ceiling surface.

M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complte all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition)

M&L Form work to sides and soffits of beams lintels etc finished rough completed all as per specified and as directed.

M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc completed all as per specified and as directed.

M & L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:6.including all neccesary formwork & finishing exposed concrete surface all as specified and directed

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises completed all as per specified and as directed.

M&L Non skid ceramic coloured tiles 8-10 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed bed in cm 1:6 completed all as per specified and as directed.

M&L for PCC 1:3:6 type C-1 (20mm graded stone agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed

S&F non skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement complete to complete including 15mm thick screed bed in CM (1:6) all as specified and directed.

All as per item No 56.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade completed all as per specified and as directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site completed all as per specified and as directed.

All as per Sl Item No.59 here-in-before but 20 mm bore pipe completed all as per specified and as directed.

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore completed all as per specified and as directed.

All as per item No. 61 above but 20 mm bore pipe completed all as per specified and as directed.

S&F triple layer 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing complete all as specified.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.

S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule (Make: Cera, Jaquar, Pearl)

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron complete all as spd & directed. (Make: Cera, Jaquar, Pearl)

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white with inlet ball valve, float valve, and handle,32 mm dia flush pipe complete.

S&F as in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as spd & directed. Make Hindustan/JINDAL

S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed (make: Jaquar/cera/pearl or equivalent) completed all as per specified and as directed.

S&F in repair CP brass soap dish complete all as specified as directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.

S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair)

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) all as directed by engineer-in-Charge

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge .

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. (Make: Jaquar, Pearl, Cera) completed all as per specified and as directed.

M&L PCC 1:3:6 type C-0 (using 12.5 mm greded agg) for hold fast pressed steel frame etc completed all as per specified and as directed.

S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

Taking down old existing water proofing treatment any type from the top of RCC/ arch slab, including PCC padding or plaster, tiles, mud etc, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @200ml per 50 kg weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with finally finish the top by providing PCC tiles of size (200x200mm) and (20-22mm) thick machine made laid on cement sand mortar (1:4) screed 12mm thick. The joint of the tiles shall be grouted and flush pointed with cement sand mortar (1:3) mixed with integral water proofing compound complete all as spd & directed.

Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed

S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed Make : Bluestar/ Nirali/ Pearl.

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered upto 3.5m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account).

M & L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

M&L of factory made fibre glass reinforced plastics (FRP) CHAJJA 4mm thick of M//s VHATT Fibre ways industries pvt ltd, M/sThakurella enterprises, M/s RD India Sahibabad, M/s DNGK Fibreways Pvt ltd brand in required colour and size and design made by resin transfer moulding (RTM machine technology, resulting in void free comact laminate in single peice having smooth gradual slope, curvature for easy drainage of water and duly reinforced by two nos vertically and one no horizontally by 250mmx2mm thick MS flat with 12mm inbuilt hole for grouting on the existing wall alongwith the 50mm flanges duly inserted and sealed in the wall complete in one single peice casted monolithically incuding all necessary fittings etc fixed in any position and height complete.

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete GDE Fe 410-S

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.

Supply & fix wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. (Make: Cera, Jaquar, Pearl)

S&F sink mixer with swinging spout (Wall mounted model) complete all as spd & directed. (Make: Cera, Jaquar, Pearl)

S&f Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply & fix in repair 50 mm wide rubber beading for doors of required size complete all as specified & directed.

M&L for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable FRLS in and including PVC concealed conduit of not less than 20 mm dia or higher medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated solid copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings For One Tube light/bulb/fancy light/street light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 110, here-in-before, but One ceiling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

ll as per item No 110, here-in-before, but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 Sqmm.

ll as per item No 110, here-in-before, but One two way point controlled by two, two way switches 05 / 06 Amps.

All as per item No 110, here-in-before, but with 2.5 Sqmm nominal cross sectional area copper conductor cable FRLS for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 110, here-in-before, but 2.5 Sqmm nominal cross sectional area copper conductor cable FRLS for one 5 / 6 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 115 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable FRLS for one 15 / 16 Amps socket outlet point on independent board.

M & L switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 3 pin, 05 / 06 Amps flush type 240 volts.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts.

Supply & fixing of socket outlet 2 in 1, 3 pin, 05 / 06 Amps and 15 / 16 Amps, flush type, 240 volts .

Supply & fixing switch piano flush type, 05/06 Amps single pole, two way 240 volts complete all as specified & directed by Engr-in-Charge

Supply and fixing bell push flush type , 5 amps , 240 volts.

Supply and fixing Bell AC, 230 volts single pole, Make :- Cona/Anchor.

Supply & fixing lamp holder (Angular / Straight), PCV/Polycarbonate insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix Decorative wall light fixture made up of Polycarbonate, suitable for 9/10 W LED lamp B22 base including 9/10 W LED lamp and including all accessories for fixing of fitting on wall all as specified and directed by Engr-in-Charge. Make Havells, Model-FLORET, ordering code LHFHCHE1TL1W020 or equivalent in Philips /Bajaj/ Surya.

Supply & fixing LED lamp 9/10 watts, CDL, with Star rating all as specified and directed. Make :- Havells or equivalent to Crompton/Havells/Wipro

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. CatPart No - LBHP-10-CDL, Make Crompton or equivalent in Havells / Surya

Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing and integrated electronic driver with all accessories and fixing material complete all as specified and directed. Make- Crompton cat Ref - LCTLN-20-CDL, Wipro-Garnet, Havells - LUMILINEBS20WLED865SPCWH

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including provisson of 32 mm bore light grade GI tube mounting bracket 0.6 m long made to shape bend to 100 to 120 degree and fixed to wall by means of flat iron clamps and suitable nuts, bolts grouted in wall etc and provision of weather proof PVC insulated copper conductor cable 2.5 Sqmm 2 core as required for connection including taking down old security light fitting with bracket any type/size all as specified and directed. Make - Crompton or equivelant in Bajaj/Havells/Surya.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor FRLS cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:-One meter of conduit along with 2x6 sq mm wire and one 6 sq mm earth wire shall be measured and paid as one unit length.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. Note : MCCB & MCBs to be fixed in this DB will be measured and paid separately under relevant items.

Supply and fix MCCB 4 Pole 100 Amps 16 KA, 415 volts , 50 Hz with adjustable thermal & magnetic release and suitable frame size as to be fixed in VTPN DB at Serial item No 21 above, all as specified and directed.

Taking out old unsv LT cable any type or size completed all as per specified and as directed.

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3½ core laid in trenches, fixing on wall/under road crossing through protection pipe etc complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading, levelling and hand punning in layers in cable trench for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply / laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches/wall/pole for cable protection complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Taking down carefully unserviceable distribution board/industrial type SPN enclosu of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Supply and fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including one single pole MCB 32 Amp, 240 Volts complete all as directed by Engineer-in-charge complete all as specified and directed.

M&L Sheet metal enclosure for DB's double door 240 Volt with IP 43 protection 200 amp rated insulated bus bar, shrouded neutral bar, earth bar, blanking plate, cable ties SPN 12 way complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 32 Amps, B curve, 10 kA. complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 40 Amps, B curve, 10 kA. complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, B curve, 10 kA. complete with connection testing and commissioning all as specified and directed by engr-in-Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , for pit cover including testing on completion complete all as specified and directed. Note:-After completion of work if desired test result is not obtained the earthing is to be redone without any extra cost to deptt.

Taking down and disconnecting ceiling fan of any size, sealing cable end, dismentalling blades, make one set of three blades and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Taking down light duty Exhaust fan metal body with sturdy steel bird cage of any sweep size and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Taking down water heater vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating , closed /ventilated type, 240 volts, glass coated heating element complete with all accessories and depositing to MES store yard for keeping in safe custody complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor ( BLDC).

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm, sweep with, blades, and frame and louvers including making hole of suitable size in the wall, plastering the surface, making good disturbed portion with plaster in CM 1:4 incl recolouring to match the existing surface all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including making hole of suitable size in the wall, plastering the surface, making good disturbed portion with plaster in CM 1:4 incl recolouring to match the existing surface all as specified and directed. Model- Ventil Air DX / DX-HS, Make - Havells

Supply and fixing including testing water heater vertical storage type 25 Ltrs capacity having stainless steel inner tank with glass enamelled coating BEE 5 star rating, closed /ventilated type, 240 volts, glass coated heating element complete with all accessories, including fixing arrangement with suitable size of fastner, nuts, bolts and washer etc incl making good disturbed surface with plaster in CM 1:4 complete including recolouring the plastered surface to match the existing surface all as specified and directed. Note:- Installation of geyser includes all connected items eg. PVC pipe for connection of inlet and outlet complete & NRV .

Supply and fixing Wall mounted fan 300 mm sweep, single phase 240 volts, white colour including connection wire three core etc complete all as specified and directed by Engineer-in-Charge. Make : Havells, Model - 12" Swing HS or equivalent in Bajaj/Crompton.

M/S Keshav Brothers

SA construction co.

Arun Construction Co.

Shikhar ji Enterprises

High Tech Metal India