SPL REPAIR TO BLDG NO. P-20 (04 X QTRS) AND P-03 (08 X QTRS) OF THE SIKH LI REGT CENTRE AT FATEHGARH

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, complete all as specified and directed

Demolition of existing sunken treatment upto height of 90CM including plaster and M&L for water proofing treatment on existing sunken floor/wall with the following specification complete all as specified and directed- (a) Laying of 50mm thick PCC 1:2:4 type B-1 for maintaining slopes (b) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC in as per manufacturer instruction (c) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (d) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (e) Laying polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm as per manufacturer instructions confirming to IS (f) One spout of 40mm GI pipe length 0.45 M shall be provided in sunken floor (g) Filling of sunken floor with PCC 1:5:10 upto height directed (h) fixing of trap as per site requirement

Dismantling of floor hearth or wall tiling, kota stones etc including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for machine cut kota stone slab as a single piece in stair case treades flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut kota stone slab as a single piece in stair case riser and skrting /dado 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 20 mm th Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20 mm th screed in CM 1:6 Complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450 x 350x 7/350x250x7 mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:4), shade & design as approved by EIC/GE, incl rubbish off the primises etc Complete all as specified and directed.

M&L for coloured chequred cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floor with white cement and pigment with and including screed bed of 15mm thick in CM (1:6 ) etc complete all as specified and directed.

Demolition of brick work or stone /bouler masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar( 1:6 ) complete all as specified and directed.

M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,Complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately)

S & F factory made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Solid Plain wire mesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cum an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed (Note: Stainless steel butt hinges shall be paid separately) Make Kumar Arch Tech pvt ltd / Rajshree / Fiber Techno Products / Eco Cell / TVL Engineering Pvt Ltd (Floresta)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed

Taking /down cement plaster any description on brick or stone work etc including taking out joints hacking for key scrubing down with water complete all as specified and directed

M&L Rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement Complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper white or any tint over a coat of primer complete over prepared surface of 1mm thick wall care putty complete as specified and directed.

M & L for complete removal of existing treatment surface and making surface smooth and applying two coats of OBD including a coat of primer over prepared surface of 1mm thick wall care putty complete as specified and directed

M&L Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and Fair without using extra cement with using WPC (WPC shall be measured and paid seperately) complete all as specified and directed .

M&L Rendering 5 mm thick in CM(1:3) as in Ceiling or concrete surfaces to be finished even and Fair without using extra cement complete as all specified and directed

Supply only WPC (Water Proofing Compound) ISI Marked complete all as specified and directed

M & L for two coats of Cement based paint over a coat of primer on new plastered wall surfaces With 1mm thick wall care putty including preparation complete all as specified and directed.

M & L complete removal of existing treatment and apply two coat of Cement based paint over a coat of primer on old wall surfaces with 1mm thick wall care putty including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered/concrete surfaces & applying three coats white wash on ceiling complete all as specified and directed.

M&L for two coat of synthetic enamel paint including preparation of steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified & directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer including preparation of new steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified & directed.,

S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) tripple layer white with all connected fittings & fixtures hoisted and fixed in position complete all as specified and directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum wt 20mm - 210 gms) complete all as specified and directed

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F 150 mm aluminium anodized, barrel tower bolts of extruded section complete all as specifed and directed.

S&F 200 mm aluminium anodized, barrel tower bolts of extruded section complete all as specifed and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 125 mm long complete all as specified and directed.

S&F butt hinges, cold rolled stainless steel 100 mm long complete all as specified and directed.

S & F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x 440 mm white with spun pipe ‘P’ or ‘S’ trap including lead joint and CI spun branch piece , front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed.

S&F in repair PVC valveless symphonic action type flushin cistern 10 litres capacity low level white inlet, ball valve, float valves & handle including, brackets, flush pipe including all joints and making good to the floors complete all as specified and directed

S&F in repair 15mm bib tap cast copper alloy (Chromium plated) ISI marked with crutch or butter fly handle screwed down, screwed for iron pipe or brass firul and fixed complete all as specified and directed..

S&F in repair PVC connnection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F in repair 15mm stop valve/ angle valve cast copper alloy, fancy type, chromium plated with high pressure with crutch butterfly handle screwed both ends for iron pipe or for unions and fixed ISI marked complete all as specified & directed.

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.Make F7010305 of Cera, Hindware Model No F160006, Parryware Model No T9985 A1 complete all as specified and directed

S&F in repair 15 mm bore concealed Stop stop cock fancy type screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S&F in repair CP grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick matt finish ISI Marked kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 300 mm ordinary rat tail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

M & L for preparation of old decoraed surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one of synthetic enamel paint complete all as specified and directed.

S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and incl 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD complete all as specified and directed Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar as per shown on drawing complete all as specifed and directed. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 12mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. Make Kumar Arch Tech pvt ltd / Rajshree / Fiber Techno Products / Eco Cell / TVL Engineering Pvt Ltd (Floresta)

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type board of size 6mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced.

Taking up or down 15 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall,ceilling,floor etc) bore of pipe 15 mm complete all as specified and directed

S&F GI tubing medium grade 15 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete all as specified and directed

Taking up or down 20 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store complete all as specified and directed

S & F for 20 mm bore medium grade galvanised steel water tubing with all fittings and fixed complete to wall or ceiling or laid in floors complete all as specified and directed

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S & F fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Make Parryware Cat No T6010A1, Cera Cat No F5005102

S&F in repair tubular towel rail 20mm dia 'D' type 60cm long between flange, brass chromium plated including bracket fixed complete all as specified and directed.

Demolition mud in roofs any thickness, including and leeping(whether full thickness removed or only a part thereof)including tarfelt etc and removing, cleaning of old roof debris by any means out sid of defece land complete all as specified and directed

M & L for providing PCC 1:3:6 type C-1using 20 mm graded stone aggreagte as in padding/levelling course of average thickness not exceding 50 mm including making kerbs at wall and roof junction complete all specified ad as directed

M & L for preparation of newly plastered surfaces of roof including cleaning the surface by using wire brush/pressure hose and applying high performance polyurethane liquid membrane roof casting cold in two coats @ 1.5 Kg/Sqm with spray/brush an elogation of 300% to 700% and tensile strength not less than 3 N/Sqm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTMD 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instruction and sound engineering practice complete all as specified and directed. Note - work shall be executed by authorized applicator of manufacture as per manufacturer's instructions and roof height upto double storey building complete all as specified and directed

Providing, cement concrete type B-1, 1:2:4 (using 20 mm grded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exceding 15 cm thickness above or below ground level complete all as specified and directed

M&L for 50 mm thickness PCC 1:3:6 type C1 using 20mm stone aggregate in plinth protection including finishing smooth without using extra cement, complete all as specified and directed

S&F in repair utencil plate rack 1 mm th of size 60 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia (Salt glazed ware, AC / PVC or reinforced concrete) etc including fitting complete all as specified and directed.

S&F in repair 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with new clamps complete all as specified and directed.

S&F in repair 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed

S&F in repair 110mm bore PVC (SWR) floor P trap,including provision of PVC garting 110mm Size complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 110 mm bore pipe with clamps complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 75 mm bore pipe with clamps complete all as specified and directed.

S & F PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and directed.

S & F PVC (SWR) bends any radius for 75 mm bore pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal with acess door opening for cleaning complete all as specified and directed.

S&F 110mm bore PVC (SWR) Cowl for vent complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed

S&F in repair PVC (SWR)110mm branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR)75mm branch piece, single (single Y) equal or unequal complete all as specified and directed

S&F in repair PVC (SWR) 110mm junction single, (Single T) equal or unequal complete all as specified and directed

S&F in repair PVC (SWR) 75 mm junction single, (Single T) equal or unequal complete all as specified and directed

S&F 110mm PVC (SWR) couplers complete all as specified and directed

S&F 75mm PVC (SWR) couplers complete all as specified and directed

Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed.

S & F MS joist channel , angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) trusses etc any type framing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A)

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and directed

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

(a) One light/ holder/fan/exhaust fan/bell point controlled by one switch complete

(b) One 5 pin 5 Amp switch socket combination point on an independent board complete

(c) One 5 pin 5 Amp socket point controlled by one switch on same board complete

All as per item No. 101 here in before but for one 15 Amp 5/6 Pin switch socket combination independent with 2.5 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Switch Piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F Socket 2 in 1, 3 Pin 6 Amp complete all as specified and directed.

S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed.

S&F switch socket combination 5 in 1, 15 Amp flush type complete all as specified and directed.

Supply and fixing Bell push ac 230 volts complete all as specified and directed.

Supply and fixing Call bell ding dong ac 230 volts complete all as specified and directed.

S&F of LED decorative wall light fixture made up of Polycarbonate, suitable for 9W TU retrofit CFL (B-22 base) including LED ball Lamp 9 Watt of colour temp 3000K & luminaire lumen >1285 lm complete all as specified and directed.

Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)

Supply and fixing in replacement of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 100 Amp with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

Supply and fixing in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

S&F in replacement MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection by appropriate size of aluminium lugs complete all as specified and directed

S&F in replacement MCB SPN 63 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F in replacement MCB of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F in replacement LED lights fitting 4 feet, 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in replacement building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement metal plug & socket DB with metal plug and MCBs dobule pole and neutral enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed.

S & F 40 mm bore GI Tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS Clapms and nut and bolts/washer complete incl dismentling all as specified and directed.

M & L Sand cushioning for cables complete all as specified and directed .

M & L for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including taking out old u/s cable etc getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown in electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. (Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

M/S SRI JAGDAMBE TRADERS (BID ID -3339089)

m/s meetu enterprises (BID ID -3339205)