REPAIR AND RESTORATION TO CERTAIN WOODEN FURNITURE AT MD ACCN AND UNITS OF BMU, DHQ-05 AND ICGAS CHENNAI AREA UNDER GE (I) CG CHENNAI.

Amount

Removing the mentioned unserviceable/broken components of Wooden furniture without damaging the adjacent parts.Supply and fixing following new component duly as per mentioned size and shape shown on drg in the existing place with standard workmanship to make the item complete in all manner:-

BIN LINEN MULTIPURPOSE,FD/E6/MAP/09

Top of size 1200mm x 450mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade as per drg.

Back of size 1200mm x 675mm made out of 12mm thick BWR plywood fixed with sides and top with adhesive and neadless nails as per drg.

Door Shutter of size 637mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading fixed to sides with piano hinge as per drg.

Door Shutter of size 518mmx400mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood fixed to sides with piano hinge as per drg.

Sides of size 637mmx450mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick teak wood beading as per drg.

Front face of drawer of size 450mmx100mm made of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

Bottom ply of drawers of size 450mmx400mm made out of 6mm plywood BWR fixed with adhesive and headless nail as per drg.

Sides of drawers of size 100mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

Handles of size 100mm long 8mm dia chrome plated shall be fixed using internal metal screws

Magnetic catchers fixed inside shutter with screws as per drg.

Complete base frame with legs of overall size 1164mmx75mmx20mm made of 1st class teak wood member in lieu of prelaminated particle board duly fixed by using metal screws and adhesive as per drg.

Shelf of size 800mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

SIDE BOARD,FD-1112

Top of size 1025mmx450mm made out of 18mm thick prelaminated MDF board exterior grade in natural teak color with edges duly covered with 4 mm thick teak wood beading as per drg.

Back of size 1025mmx750mm made out of 18mm thick prelaminated MDF board exterior grade of natural teak color with upper projected edge covered with 4mm thick teak wood beading as per drg

Door Shutter of size 637mmx340mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood and fixed to sides with piano hinge.

Sides of size 675mmx450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Front face of drawers of size 130mmx 340mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

Bottom ply of drawers in size 450mmx358mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

Sides of drawers of size 130mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of natural teak color with upper projected edge covered with 4mm thick teak wood beading as per drg

D- type handles of size 100mm long 8mm dia chrome plated shall be fixed using internal metal screws

Magnetic catchers as per IS Standard

Shelf of size 800mmx400mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with top edge duly covered with 4 mm thick teak wood beading as per drg.

Bottom of size 1025mmx450mm made out of 18mm thick prelaminated MDF board exterior grade in natural teak color with edges duly covered with 4 mm thick teak wood beading as per drg.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

HAT STAND WITH MIRROR,FD-233

Front teak face plywood 4mm thick of size 1000mmx710mm as per drg

Back Commercial plywood 4mm thick of size 1000mmx710mm as per drg

Wooden frame member of size 1000mmx20mmx50mm as per drg.

5mm thick looking mirror of size 440mmx300mm duly fixed with teak wood beading made out of 10mmx12mm section .

Teak wood beading of size 710mmx35mmx6mm as per drg.

Teak wood beading of size 1000mmx35mmx6mm as per drg.

Steel Peg of size 120mm long duly fixed with brass screws as per drg.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE 3' X 2' WITHOUT DRAWER;- FD-284

Top of size 900mmx600mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg

Top long rail of size 900mmx20mmx60mm made of 1st class teak wood as per size on drg

Top Short rail of size 600x20mmx60mm made of 1st class teak wood as per size on drg

Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood as per size on drg

Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TEAPOY WOODEN,FD-232/278

Top of size 600mmx450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood.

Legs of size 520mmx60mmx30mm made of 1st class teak wood as per size on drg

Top long rail of size 600mmx 50mmx20mm made of 1st class teak wood as per size on drg

Bottom rail of size 450mmx50mmx20mm made of 1st class teak wood as per size on drg

Long Stiffener of size 600mmx20mmx50mm in between two bottom rails irrespective of what is shown in drg ,made of 1st class teak wood.

Corner shape wooden bracket of size 75mmx75mmx20mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE CENTRE ,FD-274

Top of size 900mmx450mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Legs of size 400mmx30mmx60mm made of 1st class teak wood as per size on drg

Top long rail of size 900mmx20mmx50mm made of 1st class teak wood as per size on drg

Top short rail of size 450mmx20mmx50mm made of 1st class teak wood as per size on drg

Bottom Rail of size 450mmx20mmx50mm Short Stiffener made of 1st class teak wood as per size on drg

Centre stiffener of size 900mmx20mmx50mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood

Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE DINING FOR 4 PERSONS:-FD/MAP-II/03

Top of size 1200mmx900mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood.

Legs of size 705mmx90mmx45mm made of 1st class teak wood as per drg

Long rail of size 1200x45mmx90mm made of 1st class teak wood as per drg

Short rail of size 900mmx45mmx90mm made of 1st class teak wood as per drg

Top stiffeners of size 900mmx25mmx90mm made of 1st class teak wood as per drg

Corner Shape wooden bracket of size 100mmx100mmx35mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03

Top of size 1500mmx900mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Legs of size 760mmx40mmx75mm made of 1st class teak wood as per size on drg

Top long rail of size 1500mmx25mmx100mm made of 1st class teak wood as per size on drg

Top short rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg

Top centre stiffener rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg

Corner Shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE DINING FOR 8 PERSONS:-FD-239 & 273

Top of size 1800mmx900mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Legs of size 760mmx40mmx75mm made of 1st class teak wood as per size on drg

Top long rail of size 1800mmx25mmx100mm made of 1st class teak wood as per size on drg

Top short rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg

Top centre stiffener rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg

Corner Shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE WRITING :-FD- 275

Top of size 1145mmx600mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Top Long rail of size 740mmx25mmx50mm made of 1st class teak wood as per drg

Top Short rail of size 600mmx25mmx50mm made of 1st class teak wood as per drg

Back ply of size 596mmx400mm made of 6mm plywood as per drg

Bottom stiffener of size 1145mmx25mmx50mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood

Shutter of compartment of size 490mmx370 made out of 18mm thick prelaminated MDF board exterior grade, natural teak color duly fixed with piano hinges and edges duly covered with 4mm thick teak wood beading by using 100mm long stainless steel hinge.

Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood .

Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg.

Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood

Legs of size 740mmx35mmx55mm made of 1st class teak wood as per drg

Handle of size 100mm long chrome plated.

Corner shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

TABLE PEG ,FD-236/277/384

Top of size 450mmx300mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood

Legs of size 362mmx30mmx50mm made of 1st class teak wood as per drg

Top long rail of size 450mmx20mmx40mm made of 1st class teak wood as per drg

Bottom side rail of size 300mmx20mmx40mm made of 1st class teak wood as per drg

Bottom Stiffener of size 450mmx20mmx40mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood

Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws.

Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish.

DRESSING TABLE MAP (FD/MAP-II/07)

S/F new looking mirror of required size with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing.

S/F new top to side compartments of size made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F new back to table dressing made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F new sides to side compartments made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F new bottom to each side compartments made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing

S/F new complete drawer to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F new shutters to side compartments made out 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F new chrome plated handles of size 100mm long to drawer and shutter.Complete all as specified and as shown on drawing

Polishing to dressing table with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

STOOL OF DRESSING TABLE , FD/MAP-II/07

S/F new openable shutter to stool made of 12mm thick BWR plywood of grade-A duly fitted with recessed type drawer pull folding handle of size not less than 75mmx37mmx4mm .Complete all as specified and as shown on drawing.

S/F new sides to stool made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging alround. Complete all as specified and as shown on drawing

S/F new bottom to stool made out of 6mm thick BWR plywood. Complete all as specified and as shown on drawing

S/F new 50mm dia twin wheel castor wheel of heavy duty duly fixed with 20mm long screw .Complete all as specified and as shown on drawing

S/F new wooden runners of size 20mmx20mm inside the stool as sown in drg .Complete all as specified and as shown on drawing

S/F new seat of stool made to shape of 75mm thick 40 density PU foam duly covered with best qulaity tapestry cloth of rate not less than 400 per mtr .Complete all as specified and as shown on drawing

Polishing to stool dressing MAP with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

MIRROR DRESSING GENTS,FD/E6/MAP/16

S/F the sides of the mirror dressing gents made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front. Complete all as specified and as shown on drawing

S/F the back of the mirror dressing gents made out of 12mm thick BWR plywood of grade-A. Complete all as specified and as shown on drawing

S/F the teak wood frame of the mirror dressing gents for holding the looking mirror in position made of teak wood battens of size 38mmx25mmx1200 mm long section. Complete all as specified and as shown on drawing

S/F the decorative beading of size 30mmx15mm x 1200mm long to the mirror dressing gents of teak wood.Complete all as specified and as shown on drawing

S/F the shelves of size 100mmx600mm made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood edging at front irrespective of what is shown in drg.Complete all as specified and as shown on drawing

S/F the teak wood bracket of size 38mmx112mmx112mm. Complete all as specified and as shown on drawing

S/F the legs made out of teak wood of size 38mmx38mmx450mm.Complete all as specified and as shown on drawing

S/F the magnetic catchers to the shutter. Complete all as specified and as shown on drawing

Polishing to mirror dressing gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.

CHAIR DINING LONG BACK ,FD/E6/MAP/10 and FD/MAP-II/04

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable Teak wood vertical stiffener and supply and fixing new Teak wood vertical stiffener of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removal the old unserviceable seat by unscrewing from bottom ,Supply and fixing new seat made of 40 density cool foam 75mm thick fixed on 12mm thick BWR plywood duly covered with best quality tapestry cloth of not less than Rs 450 per meters with standard workmanship using white muslin cloth at bottom.The tapestry cloth shall be fixed to bottom ply with pressure hydraulic stapler pins.The seat after upholstery shall be fixed within /over the wooden frame by using black gypsum screws from beneath through corner brackets.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

LEO ENTERPRISES (BID ID -3200382)

M/s KM Marimuthu Achary (BID ID -3199497)