REPAIRS TO FLOORING TILLING WORK AND PLUMBING WORK AT ARJAN, DHATIGARHA, SAFFRON AND NISHAT AREA AT 8FBSU, AF STN AWANTIPUR

Amount

Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (40mm graded aggregate) 75 mm thick for sub-base in sub floor sub base, floor and paving etc cement complete all as specified and directed.

M&L for PCC 25mm thick 1:2:4 type B0( using 12.5mm graded crushed stone aggregates) as in sub flooring , complete all specified and directed.

Demolition for floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed.

M&L coloured/printed ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

-ditto- but on vertical surfaces such as skirting incl including 9 to10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed.

M&L coloured/printed non skid ceramic tiles 7 mm thick (square/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid beded and pointed in any mortar

M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed in cement mortar (1:6) laid and jointed with gray cement slurry mixed with pigment, complete

Demolition of stone/brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed

M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to radius half brick wall built in CM (1:4) complete all as specified and directed.

Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm graded aggregate) incl demolition of cement concrete reinforced of any description in any position complete all specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.

Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L Rendering cement plaster 10 mm thick in cement mortar 1:6 on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified

M&L for preparation of new plastered surface on walls and applying two coats of oil bound distemper over a coat of primer on plastered surfaces complete all as specified and directed.

Taking down chowkhat or frames with shutter exceeding 1.5 Sqm but not 4.0 sqm each with shutter (without taking off shutters from the frames) and removing from site including making the disturbed portion , complete all specified and directed.

Taking down chowkhat or frames with shutter not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frames) and removing from site including making the disturbed portion , complete all specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colur PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, & joined together with solvent cement , supplying & fixing in the frame at site as per specification complete all specified and directed.

S&F in repair aluminum anodized, barrel tower bolts of extruded section, length of bolt 150 mm , complete all specified and directed.

S&F in repair aluminum alloy handle of extruded section of size 125 mm, complete all specified and directed.

S&F in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and directed.

S&F in repairs for sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs for stainless steel plate rack of 1 mm thick for kitchen including fixing cantilever brackets ,overall size 900mmx750mmx250 mm all as specified and directed by Engineer in Charge.

S & F in repair curtain rails of stainless steel with fixing brackets, stops, rollers, funnels etc complete.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.

M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Taking up or down steel tubing of 15mm bore and connections including cleaning for re-fixing complete all as specified and directed.

S&F GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors including concealed in wall complete all as specified and directed.

Fixing only GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors (Note: Serviceable pipe retrieved under srl item 36 here in before shall be reused) complete all as specified and directed

Taking up or down steel tubing of 20mm bore and connections including cleaning for re-fixing complete all as specified and directed.

S&F GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

Fixing only GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors (Note: Serviceable pipe retrieved under srl item 39 here in before shall be reused) complete all as specified and directed

S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water storage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed.

S&F in repair ball brass valve ,high pressure with polythene float and flynut complete screwed for iron pipe or ferrule 20mm bore fixed complete all as specified and directed

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing in repair Shower Rose brass chromium plated 125mm size with arm suitable for 15mm dia pipe all as specified and as directed.

S&F 32mm dia PVC waste pipe for wash hand basin,sink,urinal etc. fixed in repair complete all as specified and directed.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S&F in repair PVC valveless symphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and CP handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed.

S&F in repair Vitreous China wash down water closet (pedestal pattern), White/ coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unserviceable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed.

S&F in repair Vitreous Chinaware squatting pan, ‘Orissa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste fitting , brass, chromium plated with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC connection and 15mm size with CP brass coupling nuts of length 450mm, trap, grating and union for discharge pipe, chain and plug and porcelain stopper and all accessories fixed in repair complete all as specified and directed

S&F in repair wall mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed

S&F in repair sink mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed

S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection complete all as specified and directed.

S&F in repairs Health Faucet CP with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook . Make : (Hindware, Prayag), complete all as specified and directed.

S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specified screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure, screwed both ends for pipe or for unions, complete all as specified and directed.

S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm complete all as specified and directed.

S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement , complete all specified and directed.

S&F in repair of PVC (SWR) floor trap of 75mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair of PVC (SWR) floor trap of 110mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair of PVC (SWR) bends any radius of 75mm bore, complete all as specified and directed.

S&F in repair of PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.

S&F PVC SWR) 'T' junction 75mm dia complete all as specified and directed.

S&F PVC SWR) 'T' junction 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.

Note :- An amount of Rs.19,848.75 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S NAIK CONSTRUCTION COMPANY (BID ID -3409564)

nazir Ahmad Dar and sons (BID ID -3408933)

M/S ABBAS M. ENTERPRISES (BID ID -3409885)

MS Ghulam Hassan and Sons (BID ID -3409791)

M/S BASHIR AHMAD AND SONS (BID ID -3408316)

M/S MIR SAJAD ENTERPRISES (BID ID -3415763)

BHAT CONTRACTORS AND GENERAL ORDER SUPPLIERS (BID ID -3416945)

M/s Gh Qadir and Sons (BID ID -3416432)