Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
13 Oct 2026, 2:30 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
TPI Agency
RCF
60 days
Expenditure
General
78
5 conditions · 2 needing a document upload
Supply as per Tender specification
The Railway reserves the right to order bulk quantity on the approved sources, and the offers of unapproved sources may be considered only for developmental order of small quantity. The status of approval of tenderer shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of downgrading/removal/suspension/banning. Minimum 80% of Net Procurable quantity shall be ordered on approved vendors
If the tendering firm(s) has been placed as developmental source in vendor directory, then offers from these firms may be considered for developmental order upto maximum of 20% of the Net Procurable Qty.
Where there are not more than three Indian Suppliers categorized as Approved Vendor for a particular item, developmental vendors can be considered for placement of bulk order without any q u a n t i t y restrictions. However, while considering such vendors, factors including past performance, capacity, delivery requirements, quantity under procurement, nature of item, outstanding order load etc. shall be considered in a transparent manner, subject to rates being reasonable. Quantity allocation among eligible vendors shall be based on pre decided splitting criteria. Such orders shall be treated as bulk orders.
Bidder should be Approved/developmental vendor as per IREPS Vendor Directory for RCF Item ID: 2400038 .
19 conditions
i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents->Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document -> Stores/Supply
Please enter the percentage of local content in the material being offered. Kindly enter 0 (Zero ) for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. For PUBLIC PROCUREMENT POLICY (Preference to Make in India ), please refer Para 16.0 Part B of Southern Railway Tender Conditions available under the mentioned link. Procurement of the item is restricted to Local suppliers with minimum local content of 20% (Class-I or Class-II Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Local suppliers" (i.e., "Non-Local suppliers" with local content less than 20%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor
Tenderers shall confirm the following declaration failing which the offer will be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India. I certify that this bidder is not from such a country or, if from such country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached."
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
i). Offer validity should be minimum 60 days. ii). Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. iii). Tenderer should mention GST No of their firm and also HSN Code for this item 8607
1 condition
Responsiveness clause:-I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage
1 location across Tamil Nadu · 7,360 Numbers total
Copper tubular crimping socket for E -be
78266579~SR
78266579
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
24 Sept 2026
24 Sept 2026
15 items · 7,360 Numbers total
Copper tubular crimping socket for E - beam cable of size 16 sq.mm with stud size M10 to Ite m no. 15 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 92.00 Numbers |
| Total | 92 Numbers | |
Copper tubular crimping socket for E - beam cable of size 70 sq.mm with stud size. M10 to It em no. 8 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 1160.00 Numbers |
| Total | 1,160 Numbers | |
Copper tubular crimping socket for E - beam cable of size 25 sq.mm with stud size M10 to Ite m no. 13 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 736.00 Numbers |
| Total | 736 Numbers | |
Copper tubular crimping socket for E - beam cable of size 50 sq.mm with stud size M16 to Ite m no. 22 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 252.00 Numbers |
| Total | 252 Numbers | |
Copper tubular crimping socket for E - beam cable of size 10 sq.mm with Item no. 2 of RCF s pecification No. EDTS 201 Rev. A, AM-3 and Corr.2 To be procured from RCF approved sources only [ Warr anty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 308.00 Numbers |
| Total | 308 Numbers | |
Copper tubular crimping socket for E - beam cable of size 70 sq.mm with stud size. M12 to It em no. 7 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 160.00 Numbers |
| Total | 160 Numbers | |
Copper tubular crimping socket for E - beam cable of size 95 sq.mm with stud size. M12 to It em no. 4 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 32.00 Numbers |
| Total | 32 Numbers | |
Copper tubular crimping socket for E - beam cable of size 95sq.mm with stud size. M10 to Ite m no. 5 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 456.00 Numbers |
| Total | 456 Numbers | |
Copper tubular crimping socket for E - beam cable of size 10 sq.mm with Item no. 1 of RCF s pecification No. EDTS 201 Rev. A, AM-3 and Corr.2 To be procured from RCF approved sources only [ Warr anty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 304.00 Numbers |
| Total | 304 Numbers | |
Copper tubular crimping socket for E - beam cable of size 16 sq.mm with stud size M8 to Ite m no. 16 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 588.00 Numbers |
| Total | 588 Numbers | |
Copper tubular crimping socket for E - beam cable of size 25 sq.mm with stud size M8 to Ite m no. 14 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 416.00 Numbers |
| Total | 416 Numbers | |
Copper tubular crimping socket for E - beam cable of size 50 sq.mm with stud size M8 to Ite m no. 11 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 556.00 Numbers |
| Total | 556 Numbers | |
Copper tubular crimping socket for E - beam cable of size 16 sq.mm with stud size M6 to Ite m no. 17 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 648.00 Numbers |
| Total | 648 Numbers | |
Copper tubular crimping socket for E - beam cable of size 50 sq.mm with stud size M10 to Ite m no. 10 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Cor.1,2 and 3 To be procured from RCF approved sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 1028.00 Numbers |
| Total | 1,028 Numbers | |
Copper tubular crimping socket for E -beam cable of size 150 sqmm with stud size. M16 to It em no. 1 of RCF specification No. EDTS 200 Rev. Nil AM- 2,Corr .1, 2 and 3 To be procured from RCF approv ed sources only [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/DLX/CW/PER, SR | Tamil Nadu | 624.00 Numbers |
| Total | 624 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .