No HO CPA 1-2 1 Tender 196 Bus Body Items and Electrical Items 2025-26

Pull and Push Switch

Painting Brush Nylon 1"

Painting Brush Nylon 2"

Painting Brush Nylon 3"

Painting Brush Nylon 4"

Writing Brush Round Type No.6

Writing Brush Round Type No.8

Writing Brush Round Type No.10

Writing Brush Flat No.12

Writing Brush Round No.12

Thread Real No.30 Vardhman/Coats

Thread Real No.24 Vardhman/Coats

Fevitite Tube (100 gram)

Anna Bound Tube Red Gesket (100 gram)

Emery Cloth

Emery Paper water proof

Boastic Solution/Rubber Adhesive 999

Silicone Sealant Std. Packing 280 ml GP 100% silicone

Matric FC-PU Sealent Gray (Sikka Flux)

Brass Flux

Aluminium Flux

PVC Insulation Tape 3/4" 10MTR Roll IS-7809 (PT-III)

PVC Insulation Tape 1" 10MTR Roll IS-7809 (PT-III)

Rubber Beeding 1.1/2"

Calcium Carbide

Flasher 24 V

Rubber out line for Front Wind Shield

Rubber Beading 2"

Flocking Channel for “E” Section

Coupler Washer for Tyre Plant

Stem with Lock for Tyre Plant

Stem without Lock for Tyre Plant

Coupling for Tyre Plant

Fevi Tight Tube (5 Minute) 100gram

N.C. Puty

Thread Real No. 2

Plastic Putty

Foot Mate (Greeen Hard Grass Mate)

Curtain Hook for Volvo Bus Plastic

Volvo Bus seat Back Newspaper Pocket

Rear View Mirror without Cover

Wiper Arm

Wiper Blade

Arm Rest Handly

Bottle Catcher

Seat Spring

Driver Door Lock

Machine Screw

Tail Light Cover

Side Indicator LED

Side Indicator old Type

Indicator Bulb

Fog Light Assy

Head Light Tube H1, H4, H7, H11

Bus Seat Arm rest Handle

Dickey Shocker

Bumper Shocket

TT Horn 12 V

TT Horn 24V

Rear View Mirror with Cover

Rear Glass

HIMACHAL ROAD TRANSPORT CORPORATION,SHIMLA-171003

No.HO:CPA:1-2(1)/Tender 196 (Bus Body and Electrical Items) /2025-26

Declaration-A

I/we have carefully gone through the terms & conditions contained in the Tender for the supply of Bus Body and Electrical Items to Himchal Road Transport Corporation, Shimla -171003:

I / we declare that all the provisions/terms & condition of this tender document are acceptable to me/us and that I / we have been authorized to make such declaration and sign all bid documents. I / we will complete the work, so allotted to me/us within the stipulated period.

Declaration-B

The Tenderer should declare that the rates quoted by them in the tender is lowest and they have not quoted/Supplied the materials to any other STU’S/ organizations during the preceding one year at less than the rates offered by them in the subject tender. If the firm has supplied the materials to any other customers during the preceding one year, at less than the rates offered by them in the subject tender, the firm shall furnish the details such as: Name of the STU/ Organization to whom the supplies were made. Rates offered to them The reasons for variation Quality Quantity/ supplied

The Declaration shall be scanned and attached as JPEG/GIF Image file along with Annexure-A ‘Commercial Offer’ in electronic mode (scanned). The original document shall be submitted along with the Prequalification Original Documents. . . Signature of the tenderer

Name Of The Firm

Address Of The Firm

Name of the Manufacturer

HIMACHAL ROAD TRANSPORT CORPORATION,SHIMLA-171003

No.HO:CPA:1-2(1)/Tender 196 (Bus Body and Electrical Items)/2025-26

TECHNICAL BID (In Annexure-'A')

TENDER DOCUMENT FOR THE SUPPLY OF “BUS BODY AND ELECTRICAL ITEMS" FOR HRTC

Name Of The Firm

i) Quality of Bus Body and Electrical Items to be supplied is to specified:

ii) Whether the firm is reputed Manufacturers/ Dealers/Suppliers.

iii) Whether the minimum annual turnover of the firm is more than Rs.1.00 Crore in each year or not.

iv) Whether the firm has furnished Earnest Money Rs.2,50,000/- or not. (Specify DD No. and Date)

v) Whether the firm has furnished Cost of Tender Document Rs. 2,360/- or not? (specify DD No. and date)

vi) Whether the firm has submitted required samples Free of Cost or not.

I. Financial Parameters

Turnover of the Firm

II. Previous clients

Previous main clients during the past three years, name of organization/STUs, Bus Body Items value thereof.

(iii) Production Capacity in last three years.

Number of Machines Installed

Make/ Model

Capacity