REPAIR TO DRAIN, CULVERTS, COMPOUND WALL, GATES AND FENCING IN ZONE C AND PERIODICAL SERVICES TO MD AND OTM ACCN OF SIGNAL RECORDS, DEPOT REGT AND KHANDARI FARM UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

M&L for Preparation of old decorated plastered/un-plastered surfaces incl all cornices of wall and applying one coat of white wash (lime) complete all as specified and directed.

-Ditto- all as per item No 01 above but one coat on ceiling

-Ditto- all as per item No 01 above but one coat of colour wash

M&L for washing, rubbing down and stopping distempered surfaces and applying one coat of oil emulsion distemper (white or tinted) on walls complete all as specified and directed.

M&L for washing, rubbing down and stopping of old painted surfaces and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old painted wooden of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

-Ditto- all as per item No 6 above but not exc. 10 cm width or girth.

M&L for One coat of synthetic enamel paint over old painted steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

M&L for preparation of surfaces and applying min 2mm thick wall care putty to plastered/unplastered surfaces for smooth finished surfaces complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) fromsteel frame/ wooden frames or stone concrete or brick surrounds,glazed with oil putty or fixed with bedding complete all as specified and directed.

M&L for Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

M&L for Grinding and polishing to existing terrazzo/kota stone flooring including making good to floor with same colour/white cement to mirror polishing and traing with be wax complete all as specified and directed.

M&L for preparation of old decorated or unplastered surfaces and complete removal of existing treatment from walls aplying priming coat based coat providing Heritage finish (texture finish with metallic coloured in any design) in any shade to colours as aproved by Engr-in-Charge and as per manufacturer's instructions complete all as specified.

Complete removal of existing treatment from walls and ceiling complete all as specified.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (Below or above ground level) and removing rubbish to a distance nexc 100m and depositing at low lying area complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance nexc 100mtr at low laying area complete all as specified.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water etc and removing rubbish to a distance nexc 50m and depositing at low lying area complete all as specified and directed

Dismantling of brick work built in cement mortar including all quoins, arches pillars but excluding ashlar facings, dressed stone work and precast concrete articles etc complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5mtr in depth for foundation etc, nexc 10 sqm on plan & getting out as in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate foundation filling mass concrete complete all as specified and directed. .

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed

ditto as per item No 21 above but except bricks

M&L RCC M-25 (Design Mix) (20 mm graded stone aggregate) as in walls, retaining walls, basement walls ballast walls and the like; any thickness; above top of footings; includng attached pillasters and buttresses complete all as specified.

M&L RCC type B1, 1:2:4 (20mm graded aggregates) as in foundation, footing, foundation beam, plinth band and base for column, basement slabs, under reamed piles and mass concrete all as specified and directed.

-Ditto- all as per item No 24 above but as in slabs suppoorted on walls,beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all as specified.

M&L 15mm thick rendering in CM 1:6 on brick wk or on concrete surface to be finished even and smooth w/o using extra cement complete all as specified and directed

M&L 15mm thick rendering in CM 1:4 on brick wk or on concrete surface to be finished even and smooth w/o using extra cement complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical or to batter tough finished surfaces concrete complete all as specified.

Formwork to sofits of suspended slabs such as roof slabs, floor slab, landings and similar work nexc 200 mm thick (horizontal or sloping) for fair finished surfaces complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces

S&F in repairs for 75mm bore UPVC Pipes (SCH-40) laid in weep holes complete all as specified & directed.

Returning filling in including ,spreading ,levelling watering and well ramming in layers n. exc 25 cm thick complete all as specified & directed.

Removing excavated material nexc 50m and depositing where directed at a level n exc 1.5m above the starting point all as specified and directed

Dismantling of RCC jali of any description and in any position complete all as specified.

M&L for providing precast cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregate) as in louvers and jallies, 35mm thick (measured solid) set CM 1:4, including all mouldings, including MS reinforcement etc all as specified and directed by Engr-in-charge.

M&L PCC (1:2:4) type B-1 (20mm graded stone aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel not exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L MS TMT bars 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia and conforming to Grade Fe 500/Fe 550 quality complete all as specified.

-Ditto- all as per item No 39 above but 10 mm dia and over

M & L for preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling posts or struts (steel or RCC) any section including taking out embedded portion and making good disturbed ground in natural ground complete all as specified

Excavating in post holes hard/dense soil (or similar holes) each n. exc 0.5 cum getting out returning filling in and ramming with earth around in layers n. exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface of complete all as specified and directed. .

M&L rolled mild steel in post and struts in fencing including tops to shape as directed drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

M & L cement concrete type C2 1:3:6 (40 mm graded stone Aggregate) as in embedding of post/struts completa all as specified.

Dismantling of fencing wire mesh any type/size complete all as specified and directed.

Supply only chain link fencing MS galvanized of wt not exceeding 4.00 Kg/Sqm complete all as specified

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc includig provn of binding wire complete all as specified

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified

M&L mild steel screw bolts machine made with hexagonal or square beads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagone or square but length of bolt exc 5 cms but not exceeding 10cm long & dia shall be of 5 to 10mm dia complete all as specified and directed

M&L Mild steel round bars 10 mm dia and over, cut to length, bent to shape required for straining, fixed to posts for chain link fencing by woven in chain link complete all as specified confirming to Gde E-250 of Gde E-165 complete all as specified and directed.

M&L two coats of synthetic enamel painting over a coat of red oxide on steel and iron surfaces of any discription over 10cm width or girth incl necessary preparation of surfaces complete all as specified.

M&L two coats of black bituminous paint on steel and iron surfaces of any discription over 10cm width or girth incl necessary preparation of surfaces complete all as specified.

S&F MS framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, etc and similar work conforming to Fe 410-0 complete all as specified

M&L in repairs for reinforced concrete pipes, class NP2, 300mm bore with collars, laid and jointed, complete all as specified and directed (Excavation & earth work and PCC shall be measured and paid for separately).

M&L in repairs for reinforced concrete pipes, class NP2,450mm bore with collars, laid and jointed, complete all as specified and directed (Excavation & earth work and PCC shall be measured and paid for separately).

S&F 50 mm bore MS Tubes, `medium grade' galvanised, with all fitting and fixed complete to frame, laid in floors/trap fixed in repair complete all as specified

M&L for providing precast cement concrete (1:2:4) type B-1 using 20 mm stone aggregate as in manhole cover slabs and similar work round square or rectangular in shape complete all as specified and directed. Note :- All RCC manhole covers to be embossed with Month & year of casting.

S & F mild steel work in framed work as in doors or gates of angle or other sections, with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and including either hooks and hingesor steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Gde Fe 290(Gde E-165)

Dismantling wrought iron or mild steel work of any description complete all as specified

Notes :- Schedule of Credit amounting to Rs. 85,950.00 to be deducted during AOC

SR ASSOCIATES

ANAMIKA CONSTRUCTION

a k builders