Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹36.3 L
EMD Value
₹73,000
Closing Date
12 Feb 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Purabi Chetia
Guwahati
Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
NESH/CSM/GHY/500-105/NIT-409 Dated 05.01.2023
Open
Civil - All
Works
Guwahati
₹2,500
₹73,000
9 Jan 2024
9 Jan 2024
12 Feb 2024
9 Jan 2024
5 Feb 2024
9 Jan 2024
Bid Proposal Sheet-Price Part(BPS-Vol-IC)
Name of Package Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
NIT NO. NESH/CSM/GHY/500-105/NIT-409 Date: 05.01.2024
Document Code No. NESH/CSM/GHY/500-105/(BPS-Vol-IC)
Address of Purchaser/ Owner Sr. General Manager (C&M)
Power Grid Corporation of India Limited.
Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
E-mail: [email protected]
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
(vii) Granting of permission for Bidding does not mean that the bidder will be awarded for the subject tender. The Award to the Contrcat shall be assessed after proper scrutiny and evaluation.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or Association from the pull down menu. Do not leave this cell blank.
● Select nos. of the Association other than the Lead Partner from drop down menu.
● Fill up names and address of the Sole Bidder and /or Association.
● Fill up date in dd-mm-yyyy format.
● Click for Schedule-1 given at the right top of the worksheet to go to Schedule-1.
Annexure-I to Schedule-1 (TOTAL BID PRICE) :
● You are required to fill only the percentage of your quoted bid price above or below the estimated cost of the subject tender in the specified cell of Annexure-I to Schedule-1.
● Total amount shall get calculated automatically.
● The total amount shall be excluding GST which shall be paid/reimbursed extra as applicable.
Happy Bidding !
Bidders Information
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Document Code: NESH/CSM/GHY/500-105/(BPS-Vol-IC) Sole Bidder
Enter following details of the bidder Associates
Specify type of Bidder [Select from drop down menu] Sole Bidder YES-GEN
Name of Bidder YES-OBC
Address of Bidder NO
Name of other Partner FEMALE
Address of other Partner
Name of other Partner - 2 (more, if any)
Address of other Partner - 2 (more, if any)
Name of Authorized person
MSE STATUS (GEN/ST/SC/OBC)
UDYAM REGISTRATION NUMBER
IF MSE YES (GENDER)
POWER GRID CORPORATION OF INDIA LIMITED
(A GOVT. OF INDIA ENTERPRISE)
NERTS GUWAHATI OFFICE
NORTH EASTERN REGION DONGTIEH, LOWER NONGRAH LAPALANG, SHILLONG
BID PROPOSAL SHEETS FOR PRICE PART (BPS: VOL-IB)
NIT NO.: NESH/CSM/GHY/500-105/NIT-409 Date: 05.01.2024
Document Code No.:NESH/CSM/GHY/500-105/(BPS-Vol-IC)
Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
BID FORM FOR PRICE BID
Bidder's Name and Address:
Bid Proposal Reference: Dated:
Person to be contacted:
Telephone No.: Fax:
Power Grid Corporation of India Limited
Dongtieh, Lower Nongrah, Lapalang.
Subject: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Dear Ladies and/or Gentlemen,
1.0 In continuation to Techno-commercial Bid, we hereby submit the Price Part of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, submit our offer for "Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati" through e-Tendering in full conformity in accordance with the terms and conditions of the Bidding Documents.
Annexure-I to Schedule-1 Bill of Quantities & Prices.
2.2 All prices and price components stated in the bid are FIRM and shall not be subjected to any price adjustment, except for revision of minimum wage in line with the bidding documents (if applicable). All prices and other terms and conditions of this proposal are valid for a period of (180) calendar days from the date of opening of the bids. Further, we confirm that we have read the provisions regarding applicable taxes, duties and levies and have submitted the bid accordingly.
2.3 We do hereby confirm that our Total bid prices quoted in Annexure-I to Schedule-1 of BPS, Vol-IB include, all costs that may be required for successful completion of the work as per the the bidding document for the total scope of work and including cost of personnel their transportation to site and any other costs which may be required for successful completion of work as per the Tender Documents, including cost of overheads, insurance, whatsoever, as stipulated in the bidding documents for the total scope of work. Accordingly, the quoted rates shall also take into consideration Service Charges of the bidder and all other statutory liabilities as detailed above as per provision of labour laws.
2.4 We confirm that all taxes as applicable on the services provided by us to POWERGRID directly or indirectly are not included in the bid price & GST shall be reimbursed / paid extra as applicable.
2.5 We have indicated the prices including all Taxes as stated at para 2.3 & 2.4 above in Annexure-I to Schedules 1 of the Bid proposal sheet.
3.0 We, hereby, declare that only the persons or firms interested in this proposal as principal or principals are named herein and that no other company, persons or firms other than those herein mentioned, have any interest in this proposal or in the Contract, to be entered into, if we are awarded the Contract; and that this proposal is made without any connection with any other company/person, firm or party like-wise submitting a proposal and that this proposal is in all respects for and in good faith without collusion or fraud.
Thanking you, we remain,
Yours faithfully,
Place: 0 Name of Bidder 0
Name of Authorized person 0
Business Address: (Designation) 0
Country of Incorporation:
(State or Province to be indicated)
Name of the Principal Officer:
Address of the Principal Officer:
Annexure-I to Schedule - 1 of BPS, Vol-IC
Bill of Quantities & Schedule of Prices
Document Code No. NESH/CSM/GHY/500-105/(BPS-Vol-IC)
Name of Work: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
NIT NO:NESH/CSM/GHY/500-105/NIT-409 Date: 05.01.2024
Sl. No. DSR'21 Item No. DESCRIPTION SAC Whether SAC/HSN in col. 4 is confirmed. If not indicate apllicable SAC Rate of GST applicable in % Whether rate of GST in Col.6 is confirmed. If not indicate applicable GST UNIT Quantity UNIT RATE (in Rs.) Quoted Percentage (in figure) Quoted unit Rate (in Rs.) AMOUNT (exclusive of GST) (in Rs.)
1 6.1.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 995456 18% Cum 2.100 6,963.72 6,963.72 14,623.81
2 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). 995454 18% Sqm 6.900 457.62 457.62 3,157.58
3 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. 995454 18% Per 50kG cement 5.000 57.83 57.83 289.15
4 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. 995454 18% Sqm 6.900 115.20 115.20 794.88
5 13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) 995472 18% Sqm 126.800 365.59 365.59 46,356.81
6 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) 995456 18% Sqm 54.400 1,030.14 1,030.14 56,039.62
7 5.30 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 995454 18% cum 0.400 10,846.59 10,846.59 4,338.64
8 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers 995457 18% Sqm 7.400 615.57 615.57 4,555.22
9 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe-500D or more. 995454 18% kg 39.100 90.71 90.71 3,546.76
10 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 995433 18% Cum 18.400 2,186.86 2,186.86 40,238.22
11 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 995474 18% Sqm 92.100 1,726.87 1,726.87 159,044.73
12 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 995474 18% Sqm 6.100 2,062.75 2,062.75 12,582.78
13 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) 995476 18% kg 150.000 471.84 471.84 70,776.00
14 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) 995476 18% kg 80.000 571.51 571.51 45,720.80
15 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 995476 18% Sqm 11.000 1,341.29 1,341.29 14,754.19
16 21.4.1 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness 995476 18% each 2.000 2,477.93 2,477.93 4,955.86
17 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 995476 18% Sqm 9.200 2,039.69 2,039.69 18,765.15
18 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 995473 18% Sqm 195.700 164.48 164.48 32,188.74
19 13.99.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 995419 18% Sqm 2.000 87.58 87.58 175.16
20 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm 995476 18% each 2.000 263.39 263.39 526.78
21 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm 995476 18% each 4.000 105.63 105.63 422.52
Const. of Dormitory for drivers and union room:
22 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) 995476 18% Sqm 169.400 1,030.14 1,030.14 174,505.72
23 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 995476 18% Sqm 169.400 87.48 87.48 14,819.11
24 5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 995474 18% Cum 9.300 10,305.99 10,305.99 95,845.71
25 Centering and shuttering including strutting, propping etc. and removal of form for- 18% 0.00 0.00
26 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers 995457 18% Sqm 38.900 615.57 615.57 23,945.67
27 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 995457 18% Sqm 27.400 813.80 813.80 22,298.12
28 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more 995454 18% kg 1245.200 90.71 90.71 112,952.09
29 10.20 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 995476 18% kg 2176.042 79.13 79.13 172,190.16
30 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 995453 18% Sqm 107.820 679.53 679.53 73,266.92
31 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 18% 0.00 0.00
34 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 995453 18% 0.00 0.00
36 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 995453 18% 0.00 0.00
39 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 995453 18% each 20.000 313.18 313.18 6,263.60
40 12.52.1 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 995453 18% Sqm 85.000 1,610.60 1,610.60 136,901.00
41 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion:Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 995476 18% kg 100.000 439.11 439.11 43,911.00
42 21.1.2.1 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately): Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 995476 18% kg 110.000 538.11 538.11 59,192.10
43 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 995476 18% Sqm 9.200 2,039.69 2,039.69 18,765.15
44 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 995476 18% sqm 11.000 1,341.29 1,341.29 14,754.19
45 21.11.3 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete.355 X 19 mm 995476 18% each 20.000 292.48 292.48 5,849.60
46 21.15.1 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.Anodized (AC 15) aluminium 995476 18% each 20.000 74.42 74.42 1,488.40
47 13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 995472 18% Sqm 288.000 310.90 310.90 89,539.20
48 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 995473 18% Sqm 144.000 164.28 164.28 23,656.32
49 13.42.1 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work 995473 18% Sqm 144.000 93.85 93.85 13,514.40
50 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. 995473 18% Sqm 288.000 65.21 65.21 18,780.48
51 2.27(sim.) Supplying and filling with sand under floors, including watering, ramming, consolidating and dressing complete. 995433 18% cum 16.000 2,186.86 2,186.86 34,989.76
52 4.2.3 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 995454 18% cum 6.000 9,486.53 9,486.53 56,919.18
53 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 995474 18% Sqm 73.650 1,726.87 1,726.87 127,183.98
54 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 995474 18% Sqm 8.000 2,062.75 2,062.75 16,502.00
55 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 995424 18% 0.00 0.00
58 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 995424 18% 0.00 0.00
60 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 995478 18% each 2.000 5,606.34 5,606.34 11,212.68
61 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore 995424 18% each 2.000 716.81 716.81 1,433.62
62 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore 995424 18% each 10.000 601.82 601.82 6,018.20
63 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 995478 18% each 2.000 3,433.14 3,433.14 6,866.28
64 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 995474 18% Sqm 6.350 946.71 946.71 6,011.61
65 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 995474 18% Sqm 9.070 1,076.08 1,076.08 9,760.05
66 15.30 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 995429 18% cum 4.000 2,962.88 2,962.88 11,851.52
67 8.8.1.3 Providing and fixing expansion hold fasteners/ chemical fastener on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm 995474 18% each 24.000 53.48 53.48 1,283.52
External development work: 0.00 0.00
68 16.47.1 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. New work (Two or more coats) 995421 18% Sqm 300.000 160.34 160.34 48,102.00
Cover shed for DG/water filter/water tank 0.00 0.00
69 10.1 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 995476 18% kg 1166.430 94.13 94.13 109,796.06
70 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 995476 18% kg 1960.060 79.11 79.11 155,060.35
71 12.5 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 995453 18% Sqm 45.000 679.35 679.35 30,570.75
72 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 995453 18% 0.00 0.00
Supply of spare pump set 0.00 0.00
76 NS Supply of 3HP, 3-phase monobloc openwell submersible pump set of make KSB/Kirloskar/Crompton Greaves as spare for underground water tank. 995468 18% each 1.000 20,342.00 20,342.00 20,342.00
77 NS Supply of 3HP, 3-phase monoblock sludge pump. 995433 18% each 1.000 20,342.00 20,342.00 20,342.00
Drain development 0.00 0.00 0.00
78 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 995454 18% cum 15.830 6,399.48 6,399.48 101,303.77
79 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 995454 18% cum 3.100 7,450.64 7,450.64 23,096.98
80 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) 995456 18% cum 70.790 6,735.54 6,735.54 476,808.88
81 13.7.1 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) 995472 18% Sqm 331.200 378.49 378.49 125,355.89
82 15.9.2 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar 995429 18% cum 20.000 2,050.63 2,050.63 41,012.60
83 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar 995429 18% cum 10.000 1,718.16 1,718.16 17,181.60
84 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil 995433 18% cum 10.000 207.84 207.84 2,078.40
PART-B: Electrical works 0.00 0.00
85 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 995461 18% 0.00 0.00
87 1.12 Wiring for light/ power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 995461 18% Metre 100.000 298.21 298.21 29,821.00
88 1.13 Wiring for light/ power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 995461 18% Metre 50.000 479.46 479.46 23,973.00
89 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 995461 18% 0.00 0.00
90 1.14.1 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire (circuit wiring) 995461 18% Metre 20.000 208.04 208.04 4,160.80
91 1.14.2 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire (for Light plugs), (4Nos. Light plugs on one circuit) 995461 18% Metre 20.000 245.54 245.54 4,910.80
92 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. 995461 18% 0.00 0.00
94 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 995461 18% Each 15.000 329.46 329.46 4,941.90
95 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 995461 18% Each 20.000 35.71 35.71 714.20
96 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 995461 18% Each 5.000 425.89 425.89 2,129.45
97 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 995461 18% Each 5.000 523.21 523.21 2,616.05
98 1.34 Supplying and fixing brass batten / angle holder including connection etc. as required. 995461 18% Each 30.000 116.96 116.96 3,508.80
99 2.40 Supplying and fixing of following ways horizontal type, three pole and neutral. MCB distribution board, 415 V, on surface/recess complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required(but without MCB/RCCB/isolator. 998736 18% 0.00 0.00
101 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 998736 18% 0.00 0.00
103 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 998739 18% Metre 20.000 62.50 62.50 1,250.00
104 NS Supply, Erection, Testing & Commissioning of A.C. ceiling fan double ball bearing 5-star rating complete in all respect with fan regulator. The fan should consume less power (Havell's /Usha /Crompton/Bajaj). 18% 0.00 0.00
106 S/E of A.C. Exhaust fan (ISI Marked Chrompton / Bajaj make) suitable for single phase A.C. 230 Volts, 50 HZ capacitor,900 RPM (Heavy Duty) complete with mounting ring frame with four fixing holes and automatic louver shutter but without regulator. The exhaust fan is to be fixed in the existing glazing with suitable MS frame of required thickness as per site including its painting etc. as per site requirement. 18% 0.00 0.00
108 NS Supplying and fixing of 1x 18 W LED Tube of approved Model No.(Philips Make) TMC501 P 1x T-LED 22WP 3241 . 995461 18% Each 20.000 2,084.97 2,084.97 41,699.40
109 NS Supplying and fixing 12W LED Lamp of approved Model no(havells/Philips Make) 995461 18% Each 5.000 591.34 591.34 2,956.70
Total Quoted Rate 3,626,075.01
0 Name of Bidder 0
0 Name of Authorized person 0
(Designation) 0
Bid Proposal Sheet-Techno-commercial Part(BPS-Vol-IB)
:: COVER PAGE ::
Name of Package Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
NIT Ref.No.: NESH/CSM/500-105
Document Code.: NESH/CSM/500-105/BPS (VOL-IB)
Address of Purchaser/ Owner Sr. General Manager (C&M)
Power Grid Corporation of India Limited.
Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
E-mail: [email protected]
: Attachments : to Tecno-Commercial Part. General guidelines for filling up the Attachments SPEC. NO. NESH/CSM/500-105/BPS (VOL-IB)
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Document Code.:NESH/CSM/500-105/BPS (VOL-IB)
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments -1 to 12 and Bid Form for Techno-commercial Part are included here.
3 Attachment 1 Bid Security : To be submitted as perproforma provided in the bidding document in physical form at POWERGRID, Shillong.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format in physical form at POWERGRID, Shillong.
Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.
पावर ग्रिड कार्पोरेशन ऑफ़ इंडिया लिमिटेड
(भारत सरकार का उद्यम)
Power Grid Corporation of India Limited
(A Government of India Enterprises)
Bidders Information
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Sole Bidder 1
Associates 2 or More
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Sole Bidder
Name of Sole Bidder
Address of Sole Bidder
Other Partner 1
Address of other Partner 2
Any Tower Parts Manufacturer proposed other than the bidder [Yes / No] No
Proposed Tower Parts Manufacturer other than the bidder, if any [Maximum two nos.]
Document Code: NESH/CSM/500-105/BPS (VOL-IB) TECHNO-COMERCIAL Part 1 one 1 st 1 January
2 two 2 nd 2 February
BID PROPOSAL SHEETS for Techno-commercial Part(BPS-Vol-IB) 3 three 3 rd 3 March
4 four 4 th 4 April
Bid Proposal Ref. No. 5 five 5 th 5 May
Date : 6 six 6 th 6 June
Person to be contacted:
7 seven 7 th 7 July
Telephone No.: Fax No.
To: 8 eight 8 th January 8 August
Sr. General Manager (C&M) 9 nine 9 th 9 September
Power Grid Corporation of India Limited. 10 ten 10 th 10 October
Dongtieh, Lower Nongrah, Lapalang. 11 eleven 11 th 11 November
Shillong - 793006. 12 twelve 12 th 12 December
14 fourteen 14 th
Name of Package : Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati 15 fifteen 15 th
Dear Sir, Enter details Amendment here. 16 sixteen 16 th
Amendment No Date
0.0 We, the undersigned Bidder, have read and examined in detail the specification and Bidding documents including Amendment(if any) of the above Package and hereby propose for –Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati Nil Nil Package name:- "Fabrication after successful Proto-assembly, Galvanising, Inspection/Testing, Transit Insurance, Packing, Forwarding, Transportation, Supply & Delivery on F.O.R. destination basis (at Nirjuli Substation) of Towers of various design & their extensions including Stubs, Cleats & Plates, Nuts & Bolts for for use in the Diversion work of 132 kV Nirjuli – Ranganadi Transmission Line Section from Loc. No. 134 to 23 under deposit Work of POWERGRID as per Technical Specification and Bill of Quantity"
0.0 In accordance with Clause No.27.0.0 of SCC of the bidding documents, as per which the bid is required to be submitted by the bidder under “SINGLE STAGE – SINGLE ENVELOPE” bidding procedure, we hereby submit our Bid as Techno-Commercial Part and Price Part. This Bid Proposal Sheets contains the techno-commercial part.
0.0 Attachment to this Bid Form: Bank Draft 18 eighteen 18 th
In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments to this Techno-commercial Part of our Bid: Enter details of EMD/ Bid Security here. Pay Order 19 nineteen 19 th
Type of EMD Currency Amount Validity of EMD Name of Inssuing Bank
(a) Attachment 1 Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Online INR 73000 Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid security has not been submitted as our firm is registered under MSE. Valid MSE certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal and/or sent by mail. …………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….
(b) Attachment 2 A power of attorney in orginial (hard copy/ Physical form) duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity. The soft/scanned copy is uploaded through the portal. Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.
(c) Attachment 3 List of Sub-Contractors 26 th
(d) Attachment 4 The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(e) Attachment 5 Work Completion Schedule. 29 th
(f) Attachment 6 Information regarding ex-employees of Employer in our firm. 31 st
(g) Attachment 7 Declaration regarding Social Accountability.
(h) Attachment 8 Information for e-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.
(i) Attachment 9 Additional Information.
(j) Attachment 10 Declaration regarding Social Accountability.
(k) Attachment 11 Checklist
0.0 We declare that the order, if awarded to us, shall be executed strictly in accordance with bid documents & Technical Specifications except for the variations & deviations all of which have been detailed out exhaustively in Attachment-5 of this proposal. We agree that any additional conditions, if found in the proposal other than those stated in Deviation Schedules, save those pertaining to any rebate offered, shall not be given effect to.
0.0 We declare that as specified in Clause 7.0.0 (SCC) of the Bidding Documents, prices/percentage quoted by us in the Price Bid shall be FIRM and shall not be subjected to any price variation or price adjustment under any circumstances, whatsoever, during the execution and completion of the works. All the prices in the Price Bid and terms & conditions of this proposal i.e. Techno-Commercial Part are valid for a period of Six (6) calendar months from the date of opening .
0.9 We confirm that except as otherwise specifically provided our Bid Prices in Price Bid include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities.
0.9 We have studied the relevant clauses of the bidding documents relating to Taxes & Duties and we hereby, declare that if any income-tax, surcharge on income-tax or any other corporate tax is attracted under the law, we agree to pay the same.
0.0 We declare that the order, if awarded to us, shall be executed strictly in accordance with bid documents & Technical Specifications except for the variations & deviations all of which have been detailed out exhaustively in Attachment 4 to BPS (Vol-IB) of this proposal. We agree that any additional conditions, if found in the proposal other than those stated in Deviation Schedules, save those pertaining to any rebate offered, shall not be given effect to
0.0 BID GUARANTEE (Attachment-1): Enter details of EMD/ Bid Security here.
0.9 Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. EMD No. and Date / NSCIC Certificate No. & date of Issue. Amount (in Words) Type of EMD / NSIC Validity of EMD / NSIC Certificate
The same has been submitted in original and two copies of the original, as per the following details :
Form of Bid Guarantee/ Bid Scurity/ EMD/ NSIC Bid Guarantee No./ NSIC No. and Date Value of Bid Guarantee Valid upto and Including
If we fail to keep the bid valid as aforesaid or make any modifications in the terms and conditions of the bid which are not acceptable to POWERGRID, We agree that POWERGRID shall, without prejudice to any other right or remedy, be at liberty to forfeit the said Bid Guarantee absolutely. Should this bid be accepted, we hereby agree to abide by and fulfill all the terms, conditions and provisions of the aforesaid documents. If, after the bid is accepted, we fail to commence the execution of the works as provided in the Conditions, We agree that POWERGRID shall without prejudice to any other right or remedy be at liberty to forfeit the said bid Guarantee absolutely.
We have also ensured that the above bid guarantee furnished by us is in line with the bidding documents and complete in the following respects:
(i) Value of non-judicial stamp paper, purchased in the name of executing bank, is as per Stamp Act.
(ii) Power of Attorney no. and date as well as signature and full name & designation of executant along with Bank's stamp.
(iii) Signature, full name, designation and address of witness.
(iv) Complete mailing address with Fax no. of the Head Office of the Bank is indicated.
(v)* Bid Guarantee is in the name of Joint Venture, covering all the partners of the Joint Venture and not in the name of partner(s) of the joint venture alone.
* Applicable only in case of a bid from a Joint Venture of two or more bidders. Strike out if not applicable.
0.0 DEVIATIONS (Attachment-4):
0.9 We declare that the works shall be performed strictly in accordance with the specifications and documents except for the variations and deviations, all of which have been detailed out exhaustively in the Attachment-4, irrespective of whatsoever has been stated to the contrary elsewhere in our Bid.
0.0 ADDITIONAL INFORMATION
6.1 In addition to the information called for in these proposal sheets, we have included with this Bid, information as listed in Attachment-9. We further confirm that such additional information does not imply any additional deviation beyond those covered in Attachment-4 and in case of any contradiction between these additional information and other provisions of Bid, the latter will prevail.
0.0 LIST OF SUB-CONTRACTORS
7.1 We have filled in the Attachment-3 regarding the list of sub-contractors.
0.0 We confirm that we stand committed to comply with all requirements of Social Accountability Standards i.e. SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records. The declaration Form in this regard is enclosed at Attachment-7.
0.0 WORK SCHEDULE
If this bid is accepted by you, we agree to complete the entire work in accordance with the Schedule indicated in relevant Clause of Special Conditions of Contract (SCC). We fully understand that the time schedule stipulated in bid documents is the essence of the Contract. The completion schedule of various major key phases of the work is indicated in the Attachment-6.
0.0 CONTRACT PERFORMANCE GUARANTEE
We further agree that if our proposal is accepted, we shall provide a contract performance guarantee as per relevant clause of SCC, Vol-IA and enter into a formal agreement with you within 30 (Thirty) days from the date of Notice of Award of Contract.
0.0 INFORMATION REGARDING EX-EMPLOYEES OF POWERGRID
We have furnished in the Attachment-6, information regarding Ex-employees of POWERGRID who had retired/resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us.
0.0 We, hereby, declare that only the persons or firms interested in this Bid as principals are named herein and that no other persons or firms other that those mentioned herein have any interest in this Bid or in the Contract to be entered into, if we are awarded the Contract, and that this proposal is made without any connection with any other persons, firm or party likewise submitting a Bid and that this Bid is in all respect for and in good faith, without collusion or fraud.
Dated this 00/01/1900
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : Printed Name :
Place : Designation :
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-1 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Bid Guarantee)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid Security - in orginial (hard copy/ Physical form), for sum of INR 73000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of Online issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-2 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Power of Attorney)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We have enclosed copy of the power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-3 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(List of Sub-Contractors)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
The following is list of our Sub-Contractors proposed to be engaged by us for the above work in the event of award on us.
Sl. No. Name & Address of Sub-Contractor Nature of Work
Date : Printed Name
Place : Designation
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-4 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
A) COMMERCIAL DEVIATIONS/EXCEPTIONS
Sl. No. Reference clause in the Specifications Statement of Deviation Cost of withdrawal of the deviation
B) TECHNICAL DEVIATIONS/EXCEPTIONS
Sl. No. Reference clause in the Specifications Statement of Deviation Cost of withdrawal of the deviation
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-5 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Work Completion Schedule)
Bidder’s Name and Address (Sole Bidder) : To,
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We hereby declare that the following Work Completion Schedule shall be followed by us for the subject Package i.e.,Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Sl. No. Description of Work Period in Weeks from the effective date of Contract
1 Mobilization of work:
2 Source identification of materials:
3 Approval of above:
4 Commencement of work:
5 Completion of Work:
Date : Printed Name :
Place : Designation :
Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-6 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-7 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Declaration regarding Social Accountability)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-8 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made
2. Address with PIN Code and State
Registered Office:
Correspondence Address:
3. Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
9. PF Registration No. of the Company
10. PF Regional Office covered (with Address)
11. Name of Contact Person
12. Contact Details
13. Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Saving Account:
Current Account:
14. 9 digit MICR code printed at bottom in middle, next to cheque no.
15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
Date : Printed Name :
Place : Designation :
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-9 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
(Additional Information)
Bidder’s Name and Address (Sole Bidder) : To
Sr. General Manager (C&M)
Name: Power Grid Corporation of India Limited.
Address: Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We have enclosed with our proposal the following additional information
Sl. No. Breif Description of Information Ref. & Page No.
Date : Printed Name :
Place : Designation :
Note :(i) Continuation sheets of like size and format may be used as per the Bidder's requirement and shall be annexed to this Schedule.
Document Code: NESH/CSM/500-105/BPS (VOL-IB)
Document Code: NESH/CSM/500-105/BPS (VOL-IB) Attachment-10 to BPS-Vol-IB
PACKAGE: Repairing & Maintenance Works of Residential Buildings at 132 kV Aizawl Substation under O&M
Bidder’s Name and Address (Sole Bidder) : To:
Sr. General Manager (C&M)
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
We confirm that Bid Form and Its Attachments in the Second Envelope have been filled up by us as per the provisions of the Instruction to Bidders / SCC. Further, we have noted that the same shall be evaluated as per the provisions of the Bidding Documents.
Date : Printed Name :
Place : Designation :
Document No. NESH/CSM/500-105/BPS (VOL-IB) Attachment-11 to BPS-Vol-IB
Package: Construction of record room at Office building basement, construction of dormitory and union room, development of drainage system and other miscellaneous civil works at POWERGRID complex, Odalbakra, Kahilipara, Guwahati
Bidder’s Name and Address (Sole Bidder) : To:
Name : Power Grid Corporation of India Limited.
Address : Dongtieh, Lower Nongrah, Lapalang.
Shillong - 793006.
Phone /Fax -0364- 2536406
Sl. No. Item Description Reference Declaration (Strike out whichever is not applicable)
1 Bid Guarantee enclosed in separate sealed envelop (one original plus two copies) & submitted in physical form Clause No.2.0.0, SCC, Vol-1A
2 Commercial deviation schedule filled in Attachment-4, BPS, Vol-IB
3 Technical deviation schedule filled in Attachment-4, BPS, Vol-IB
4 List of Subcontractors schedule fillid in Attachment-3, BPS, Vol-IB
5 Additional information included with this Proposal Attachment-9, BPS, Vol-IB
6 Work schedule filled in Attachment-5, BPS, Vol-IB
7 Schedule on information regarding Ex-employees of POWERGRID in the firm filled in Attachment-6, BPS, Vol-IB
8 Declaration Regarding Social Accountability Attachment-7, BPS, Vol-IB
Date : Printed Name :
Place : Designation :
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Price_schedule-OTE.xlsx
xlsx • 0.07 MB
1-_Main_Cover_Page.doc
doc • 0.12 MB
2] Detail NIT.doc
doc • 0.35 MB
Plan Drawing.pdf
pdf • 0.66 MB
First Envelope and Bid Forms.xls
xls • 0.45 MB
Annexure E-to SCC (List of Banks).doc
doc • 0.01 MB
Annexure F-Online Payment Through POPU.pdf
pdf • 0.09 MB
Annexure-A_QR.docx
docx • 0.02 MB
Annexure-B-(SCC)_Bid Gaurantee_Format.doc
doc • 0.03 MB
Annexure-C-(SCC)_CPG_BG_Format.doc
doc • 0.04 MB
Annexure-C1 List of Banks.docx
docx • 0.02 MB
Annexure- D Non-Divisible.docx
docx • 0.02 MB
Attach-I to Annexure-D-(SCC)_Affidavit for self-certification.DOCX
docx • 0.02 MB
Attach-II to Annexure-D-(SCC)_Certificate by Audtor.docx
docx • 0.02 MB
Annexure- G Safety pact.docx
docx • 0.02 MB
Annexure-G1 Safety Plan.doc
doc • 0.09 MB
Annexure-H Purchase preference MSE.docx
docx • 0.02 MB
Form No 21 Authorization certificate issued by Domestic .docx
docx • 0.02 MB
Form No 22 Authorization certificate issued by Dome - Copy.docx
docx • 0.02 MB
Undertaking DMI&SP Policy.docx
docx • 0.02 MB
SCC_500-105.doc
doc • 0.30 MB
Standard Field Quality Plan Civil Works for Site Packages Revision 04.pdf
pdf • 2.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .