CERTAIN B R REPAIRS WORKS AS JOINERY FLOORING PLUMBING CONNECTED B R WORKS FOR OFFRS AND JCOS OR MD ACCN IN THE AREA OF AGE B R I UNDER GE NORTH DELHI CANTT 10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete , all as specified and directed by Engineer-in Charge.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each complete , all as specified and directed by Engineer-in Charge.

Taking down shutters of any description not exceeding 1 square metre each complete , all as specified and directed by Engineer-in Charge.

S&F rolled section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates incluidng welding 3 Nos MS butt hinges 100mm & 01 No 50mm complete (Butt hinges shall be measured and paid for separately).

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a)

S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 19mm thick ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand & cup boards etc complete all as specified and directed .

S&F for extra over rates of block board or veneered partical board for external 6mm th teak wood beading all around complete all as specified and directed .

S&Fin repairs steel windows with side hung shutter swith openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long and steel peg stay all as applicable, complete with glazing bars, glass/gauge, dovetailed or welded complete all as specified and directed. (Glass/Gauge shall be measured and paid separately).

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete in repairs , all as specified and directed by Engr-in-charge.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete(steel or wooden metal) all as specified.

S & F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete .

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F mild steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

Supply and fixing of mild steel cold rolled butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified.

All as above but 75mm.

S&F continuous M S CP piano type hinges 30mm flap (when opened ), bright finish or electrogalvanised complete all as specified.

S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified.

S&F in repairs 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.

S&F in repairs 150mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel). all as specified.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint all as specified.

M&L two coats of distemper oil emulsion on walls including preparation on new surfaces over coat of primer complete all as specified and directed. .

M&L two coats of distemper oil emulsion on walls including preparation on old surfaces ,complete all as specified and directed. .

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in fixing of hold fast complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for Rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L Viterified ceramic tiles 10 mm thick square/rectangular dark shade)granite or marble texture polished,area of each tiles not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed. Make :Somany ,Kajarya ,Orient

All as per item No 41 but on vertical surface as in skirting ,including 10 mm thick rendering in CM 1:3 even on fair faces of brick work complete all as specified and directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L for 10 mm thick rendering as backing coat on fair faces of brick /concrete surfaces in cement mortar 1:4 and rough finished on vertical surfaces complete all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (600mm x300mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

S&F aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

S&F in repair galvanised mild steel wire clothcut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

M&L Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length.

S&F rubber gasket for fixing glass pane all as specified.

S&F glass panes of plain sheet glass 5.50 mm thick of ordinary quality in square exc 0.50 sqm each pane all as specified.

S&F in rep 100 mm size butt hinges , extruded aluminum alloy ISI marked

S&F in rep aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia incl brackets complete all as specified and directed.

S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm X 44.45mmX2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.

S&F Anodised aluminumalloy powder coated stantard hollow section for door including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles(150mm) in each door etc and other accessories complete incl taking down old door etc complete all as specified and directed .

S&F Anodised aluminum alloy powder coated standerd hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels,5mm thick tinted glass, glazing clips joint cleats,rubber gassket etc and other accessories incl taking down old windows etc complete all as specified and directed (a) Frame of section :- 83.50mmX44.50mmX1.60 mm thickness. (b) sliding window section (channel):-40mmX18mm of 1.20mm thickness with locking arrangemeny. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. 2) Minimum thickness of powder coating shall be 50 micron. (3) make for PVC sheet :- sintex,Rajshree,Tata.

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by Engineer in charge.

Supply and fix in repairs vitreous china water closet Squatt Pattern ) " Orissa pattern " size 580 x 440 mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet including lime concrete complete all as specified and directed ( Make HINDWARE / PARRYWARE / NEYCER/ CERA)

S&F in reapir hand shower (Helath faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) (Make Jaquar, Cat No ALD 577). Complete all as specified.

S&F in reapir angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified..

M&L stainless steel plate rack made of 0.80 mm thick sheet of size 900X600X250 mm fixed to wall with suitable rawl plug all as directed.

S&F in repair 15mm dia stopcock fancy type chromium plated concealed type

S&F as in repair bib tap 15mm bore fancy type chromium plated all as specified.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm, as in repairs all as specified.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity. all as specified

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified .

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity. all as specified

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified .

Demolition of brick/stone masonry built in CM. all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified.

S&Fin rep Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. all as specified.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

M&L 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

Refixing of old steel tubing and connections in new or old position ( wall/floor/ceilings etc ) of size 15 mm bore

Refixing of old steel tubing and connections in new or old position ( wall/floor/ceilings etc ) of size 20 mm bore

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20mm bore pipe.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15 mm bore pipe.

S&F in rep sinks with drainage board made of stainless steel I mm thick kitchen or laboratory with plugs,washers and wastes coupling including bedding in cement mortar to dwarf wall, neccessary masonary work or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm . complete all as directed.

S&F in rep vitreous china wash down water closet pan (pedestal pattern),white (excluding fixing bolts, flushing cistern & flush pipe) incl black seat cover with necessary fittings all as specified and directed..

S&F in repair 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs. 101690.00

P.H. construction

Simran construction Company

m/s lovely cool air

M/S AADI ENTERPRISES

AAYUSHI ENTERPRISES