REPAIR / MAINT TO JC, SC, FO STUDENT OFFRS ACCN AT AWC UNDER GE(AWC) MHOW.

Amount

M&L preparing old cement base painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat with cement base paint , white or tinted including and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of old decorated distempered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of distemper ( in patches also , in any height )of any tint/shade complete all as specified.

M&L preparation of decorated old plastered or unplastered surfaces of ceilings by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash ( in patches also , in any height )including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of old painted surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all dropings complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

M&L Preparation of old painted Brick, stone, concrete, AC or plastered surfaces of of walls any description over 10 cm width or girth , not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed.

Complete removal of existing treatment from brick wall surfaces complete all as specified

M & L Preparation newly plastered surfaces and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.

M&L preparation of old decorated distempered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coats of distemper of any tint/shade complete all as specified. NOTE: The area for distemper can be in patches or in any height . Each coat is Checked by Engg-in-Charge and Approved by GE AWC.

M&L one coats of exterior emulsion paint ( Apex or weather coat) , white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Taking down cement plaster on brick or stone walls , ceilng etc. including racking out joints, hacking for key, scrubbing down with water, any description / height etc. and removing of the rubbish complete all as specified .

M & L 12 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete.

M & L 10 mm thick plastering in cement mortar 1:3 on ceiling surfaces on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth complete.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared newly plastered surfaces of internal wall all as per specified and directed.

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats with cement base paint , white or tinted including and washing floors, etc. , of drops and splashes complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M&L Rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290( Gde-E-165) complete all as specified.

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings.

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated/plain sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

Demolition of un-reinforced cement concrete in ground floors and pavigns not exc.15 cm thickness. (Below or abve ground level).

M&L 75mm thick PCC type C-2 (1:3:6) (using40 mm graded crushed stone aggregate as in plinth protection laid in panels, finished even and smooth without using extra cement.

Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match also in patches over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Material and labour Non-skid coloured Ceramic tiles 7 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match .

M&L glazed ceramic Coloured tiles, 300mmx200mmx6.5mm thick, on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match also in patches complete over 10mm thick screeding in CM 1:4 all as specified.

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match .

Dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L 18-20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for bullnosing / rounding to exposed edges of stone slab ( any type) and polishing to match the adjoining surfaces complete all as specified.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

S&F 4 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height in portion (part) complete all as specified.

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height in portion (part) complete all as specified.

S&F 3 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with oil putty at any height in portion (part) complete all as specified.

M&L welding for repairs to doors/ windows/ventilators etc. n.exc 2.5 cm in length, thickness of metal to be welded not exc 6 mm complete all as specified and directed . ( Note:- Taking down the article and refixing in position after welding shall be measured separately).

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F 2nd class HW rail and style ,35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified.

M&L 35 mm thick factory made door shutters made out of second Class soft Wood , Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauze complete all as specified.

M&L preparation of new wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Supply & fixed only galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F (in repair)galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S & F butt hinges aluminium anodised in 100mm size complete all as specified and directed

S&F butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F 150 mm long Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed.and specified.

S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.

S&F 100 mm size Hasp and staple , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.

S&F in repairs Door seal of superior quality made out of aluminium anodised ( 20mmx1.5mm strips) materials and fixed to door shutters and CP MS screws 25 mm long complete all as specified.

S&F in repairs corner glass shelf 250mm (10'') long complete as per sample approved by AGE B/R-III complete all as specified.

S & F in repair shelf in long size fixed with and including chromium plated brass screws and wooden/plastic cleats.( Min wt 300gms) Make :Prayag or equivalent

S&F in repairs powder coated steel peg set having 06 Nos pegs fixed to wall with CP Mild steel screws and PVC rawl plugs complete all a specified.

S&F (in repairs) 25 mm dia fancy type drapery curtain rod made of Aluminium duly PVC sleeved with a pair of brackets and finial and fixed complete all as specified.

S&F ( in repairs) Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm Olympia of Nirali or equivalent of other specified make complete all as specified and directed. Make :- Nirali , Diamond ,Jain Brothers Sanitation Pvt Ltd

S&F in repair vitreous China wash down water closet pan ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified.

Supply only ( ISI Marked) Coloured Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices. Make:- Hindware, Parryware, Cera

S&F ( in repairs) Low level flushing cistern, moulded from virgin poly propylene Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. Make: Hindustan Sanitary Ware ( 1st quality) , Parryware (Superfine) , Cera (1st quality)

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified fixed in repairs . Make:- Parryware ( Superfine),Cera ( 1st quality),Hindustan Sanitary ware (1st quality)

Supply only 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make : Plumber, Parryware, Jaquar.

S&F in repair Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. Make - Cat part No DL-55102 of Plumber , Cat part No VIR-191 of Pearl, Cat part No FLR-5169 NB of Jaquar.

S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. Make:- Plumber Cat No.SPB-5102 or equivalent of Parryware, Jaquar.

S&F ( in repairs )15mm bore Cast copper alloy Chromium plated Angle stop cock( one way) long thread with wall flange , screwed down , high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified. Make:- Plumber Cat No FLP-0507 , Pearl cat part No PIS-103 , Jaquar Cat part No CQT-23059

S&F ( in repairs) CP Angle stop cock( two way) CAT No. EC-0599 of Plumber, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified . Make:- Plumber Cat No.FLP-0599 or equivalent of Parryware, Jaquar.

S&F ( in repairs) Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder completed. Make - Cat part No IT-1940Mof Plumber , Catpart No HF-130 of Pearl, Cat part No ALD-CHR-583 of Jaquar

S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed. Make - Cat part NoITP-2101of Plumber , Catpart No SHP-527 of Pearl, Cat part No OHS-1989 of Jaquar

S&F in repair Chromium plated fancy long body Bib taps , cast copper alloy , screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified of Make:- Plumber Cat No. EC-0203 or equivalent of Parryware, Jaquar.

S&F in repair 15 mm bore dia cp bib taps, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. Make:- Plumber Cat No. FLP-0202 or equivalent of Parryware, Jaquar.

S&F in repair CP towel Rail Square with Round Flange, complete all as specified and directed by Engineer-incharge. Make:- Plumber cat part No . ER-0912 or equivalent of Parryware, Jaquar.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.

S&F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. Make:- Plumber Cat Part No. U-0916 or equivalent of Parryware, Jaquar.

Supply & Fixing in repairs 20 mm ball brass valves high pressure with polythelene float and fly nuts complete scrued for iron pipe or brass ferrule .

Cleaning of water storage tanks and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, exc 250 & n. exc 500 ltr capacity.

Cleaning of water storage tanks and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, exc 500 & n. exc 1000 ltr capacity.

S&F in repair 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified

Descriptio Same as per Item No- 88.00 above but fixed to wall complete all as specified

S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber joints fixed to walls complete all as specified

S & F in repair PVC bends/T 110mm complete all as specified

Descriptio Same as per Item No- 91.00 above but for 75 mm bore pipe complete all as specified

S & F in repair low density polythelene PVC waste pipe 32mm bore and 1 m long for wash basin/sink complete all as specified

Taking down/out vegetationgrowth root, stems etc. from wall/ roof surfaces etc. ( at any height) by injecting effective weed killer like roundup of Monsanto/Grtanaxone/Farmaxone/ Paraquaut dichloride 24% SL herbside of Make Papiq or equivalent as approved by GE, dismantling the effective portion of PCC/ brickwork and making good the surfaces in PCC 1:2:4 type B1/ brickwork ( superficial area not less than 150 sqcm) in CM 1:6 ( to match the existing) and applying rendering in CM 1:4 mixed with WPC as per manufacturers instructions and finally matching the surface with adjoining surfaces complete all as specified and directed.

S & F 150mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

Dismantling of existing water tank of exc 500 ltrs & n. exc 1000 ltr capacity and removing.

Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs for the following size and removing to site

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete.

S & F rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with all necessary conections all as specified in SSR Pt-I.

S & F in repair PVC bath cabinet box type with shutter complete. (Make :- Prayag /plumber/ESS)

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

Taking up or down existing 15 mm dia steel tubing and connection and removing complete.

Taking up or down existing 20 mm dia steel tubing and connection and removing complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

S&F ( in repairs) jet spray with 1 metre extendable metal tube and holder completed Make: Plumber or equivalent of other Make Specified . Make: Plumber Cat No.U-1905 or equivalent of Parryware, Jaquar.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

Supply only water proofing compound

M/S GARG CONSTRUCTION

ram prashad chotelal batham