Electrification of PKGBY layout near Ashray colony ward No.06 in Kalaburagi city. Head of A/C KKRDB MICRO 2024-25 ESTIMATE COST 75.00 LAKHS (CATEGORY GENERAL)

Electrification of PKGBY layout near Ashray colony ward No.06 in Kalaburagi city

RCC Pole-9.0M Long,145 kg WL

11 kV Horizontal cross arm with single top ,clamp,bolt & nuts with washers for RCC poles MS

Stud pole guy using 8 Mtr Long RCCpole and 2 nos 2 pin cross arms complete set

DP Structure with 9 Mtrs RCC Pole

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

281008-8 SWG G.I.Wire

2811101-Guy with Complete set

2811103-Earthing Materials Type for grounding.

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

DISC Insulator 45 kN Porcelain

Rabbit ACSR(6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975

95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm

Aluminium End Terminal (Lug) 95 Sqmm

LT Feeder Piller Box (MS & Thermoset Plastic)

8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/4...

DOLO Cutout as per IS-9385, Part-1 to 3

11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018)

GOS as per IS-9921, IS-1977 11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)

LT Current Transformer, 3.75 VA, Ring type as per IS-2705 Part-1&2 CT Ratio - 100/5A, 0.5 Accuracy Class

CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle (50-150 KW)

992754-11 kv Lightning Arrestor, Meta

GOS as per IS-9921, IS-1977 H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

301230-L.T.Distribution Box for 100 kva

Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 B. CABLE ENTRY TYPE

100 kVA, Aluminium Wdg, Star 2 (5 Star)

GI Pipe B - Class as per IS-1239 GI Pipe - 100 mm Dia

Miscellaneous Materials- River Sand

Miscellaneous Materials - Cable Covering Tile 125x250x40 mm

Miscellaneous Materials - Route & Joint indicating slab with MS Anchor rod

Miscellaneous Materials-

RCC Hume Pipe 2000 mm long 150 mm Dia

Construction of platform (1.5x1.5x1.2) mtr in size stone, for erection of transformers/Heavy equipment including all materials

Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and...

Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth

Loading & unloading of 9 mtr RCC/PSC poles

Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

Fixing Stud pole guy using 8 Mtr Long RCCpole and 2 nos 2 pin cross arms complete set in Hard soil

Fixing DP Structure with 9 Mtrs RCC Pole in Hard soil

Same as above using RCC poles 9 mtr to 10 mtr long

Errection of H Frame.

Stringing of conductor wren, squirrel, weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

Digging of Pit for GUY SET in hard soil

Digging of Pit for providing GI Pipe type Earthing in Hard soil

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

Labor charges For Rabbit ACSR

Normal soil 5' bore size

Laying of cable for HT Cable 3x95 to 150 sq.mm

UG Cable Works FOR Earth work excavation for cable trench of 0.5 to 0.75 mtr In Ordinary Soil

Labour charges for Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable (3x95 Sqmm to 3X150 Sqmm)

labour charges for LT Feeder pillar box above 8 ways

Fixing DOLO cutouts / Horn Gap Fuses including fixing of cross arms and wiring

Fixing of GOS including wiring (11kV SB 200A)

Erection of NCTs with ground including movement from the point of unloading to the point of erection

Labour11 kv Lightning Arrestor, Metal oxide, 9 KV, 5 KA polymeric type with ground disconnector

Errection of H Frame.

lobur charges for 95 sqm mm 3.5 core 1x1000 sq. mm LT UG cable

Laying of cable for HT Cable 3x95 to 150 sq.mm

Fixing LT Distribution box for 100/ 250 / 500 KVA DTCs (Excluding wiring)

a)Erection of 100kVA Transformer on Transformer structure.

Loading of Transformer 100 kVA

Un loading of Transformer 100 kVA

Laying the GI Pipe 80mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete.

Soil classification has to be certified by the concerned Executive Engineer Elc. Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in ...

Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (sand charges are separate).

Covering cable with Tiles

Fixing of Route Joint indicating Slabs.

laour charges for RCC Pipe

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting Out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 As per P...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

Wooden/Aluminum Rollers as directed by the departmental staff. As per PWD ELE 2023-24 Volume VI Part III Page No 52 I.No.21.05...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and isplaying necessary Danger Boards an...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

UNDERGROUND FIBRE OPTIC UNARMOURED CABLE (UG - OFC) & ACCESSORIES

:Polyvinyl Lubricated Bond (PLB/HDPE) pipe OD 40 mm(As per KCSR 2023-24 Volume VI Part III Page No 63 I.No.30.10 Basic Rate:98.00/Rmt)

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulations heat hed suitable for work...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3 with Short circuit breaking capac...

Supply and Installation /Fixing /Provision of Out door type Thermo plastic Modular Panelen closure with transparent Polycarbonate Lid, shock proof, IP65(WeatherProof), rustproof, dustproof, waterproof...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve,indicator ON/OFF,energy cross-3 with Short circuit breaking capaci...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.cut outsand other equipment's on the meter board using 40mm dia2. 90mm thick GIpipe 2.5m long buried in a pit.The pit should be f...

Fabricating,supplyinganderectionof.mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,Bakeliteshe...

Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete

Single Arm Bracket with 1500 mm Standard 40/50 mm dia

SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipationLampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerialdeliveringsu...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade

flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulations heat hed suitable for work...

Supply and Installation/ Fixing/ Provision of Pole box with HRC Fuse/ MCB provision and suitable connector/ terminal for 3Ph/ 1Ph connections with Loop-In & Loop-Out terminals for 10mm2/ 25mm2 3.5 C A...