Loading
Loading…
Loading…
Tender Value
₹21.4 L
EMD Value
₹42,900
Closing Date
23 Jul 2026, 6:00 pmClosed
Exeuctive Engineer PWD Dn.-Nokha
Sujangarh Road Nokha
Repair work on Road Ankhisar to Ankhisar Fanta Km. 0/0 to 4/0 Under DLP
2026_CEPWD_575846_1
NIT 03/2026-27 PWD Dn.- Nokha
Open Tender
Civil Works
Percentage
30 days
Nokha
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Exeuctive Engineer PWD Dn.-Nokha
₹42,900
Yes
18 Jul 2026
18 Jul 2026
24 Jul 2026
18 Jul 2026
23 Jul 2026
18 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MoRTH specifications Clause 3002. Mechanical Means | 118.8 | Cum | 118 | ₹14,018.4 |
| 2 | Maintenance of WBM road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and ravelling as per MoRTH specification Clause 404 | - | Sqm | 138 | - |
| 3 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 | - | Sqm | 31 | - |
| 4 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. | - | Sqm | 11 | - |
| 5 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means. Bitumen (VG-30) | - | Sqm | 135 | - |
| 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511. Case - II : Type B. Bitumen (VG-30) | - | Sqm | 44 | - |
| 7 | Providing and applying tack coat with Bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 to 0.40 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503 and IRC-16-2008 | - | Sqm | 14.75 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.27 MB
Tendernotice_2.pdf
PDF • 4.76 MB
Tendernotice_3.pdf
PDF • 17.97 MB
BOQ_1023913.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .