REPAIR/MAINT OF SUNKEN, FLOORING, INTERNAL DAMP PROOFING , RAINWATER PIPES, ROOF TREATMENT AND OTHER CONNECTED MISC WORKS AT CAMP, MT, DEMO SQN, VINDHYA VIHAR AND BWTA AT AWC UNDER AGE B/R-III, GE AWC MHOW

Amount

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame )

M & L 2nd class hard wood Plain solid , straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints, and incl FI hold fast (06 nos in each door) embedded in ( incl) PCC (1:3:6) as bed block complete all as directed and directed.

S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

Suplly only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge.

S & F 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

M & L in repairs 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&Fpowder coated Aluminium door, frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm- 02 nos, sliding door bolt 300 mm-01 nos or mortice lock-01 nos, with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified

S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F (in repair) Solid PVC Wall Lining consisting of 5 mm thick printed or wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on and incl PVC frame as per specifications and driwing in SSR pt II, complete all as specified and directed. (Note : Including PVC fillet as required)

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane, including hacking out old broken glass pane from steel frame complete all as specified and as directed.

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks, door shutter/gate and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair, including taking down cement plaster of any description on brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water at any height etc complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair, including raking out joints, hacking for key, scrubbing down with water at any height etc complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound as per manufracturer instruction, surface finished even and smooth, including taking down cement plaster of any description on brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water at any height etc and incl cost of liquid water proofing complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound as per manufracturer instruction, surface finished even and smooth, and incl cost of liquid water proofing complete all as specified and as directed.

M & L 10 mm thick plastering in cement mortar 1:3 on ceiling surfaces on fair faces of brick or concrete surface finished even and smooth without using extra, including taking down cement plaster of any description on brick or stone walls, ceiling etc including raking out joints , hacking for key, scrubbing down with water at any height etc complete all as specified and as directed.

M & L applying (by using of roller) two coats of distermper oil emulsion over a coat of primer over and incl minimum 1mm thick wall care putty on wall surface incl preparation of new surface complete all as specified and directed.

Material & labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 It / 10 sqm over and including minimum 1mm thick exterior putty and crack to be filled with crack filler, and incl preparation of new surface complete all as specified and directed.

M & L applying (by using of roller) two coats of distermper oil emulsion over a coat of primer over and incl minimum 1mm thick wall care putty on wall surface, including complete removal of existing treatment on wall, complete all as specified and directed

M & L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr / 10 sqm over and including minimum 1mm thick exterior putty and crack to be filled with crack filler, including complete removal of existing treatment on wall, complete all as specified and directed.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall and applying three coat of white wash complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed by Engineer - in -Charge.

Description same as per item No 44 above but on vertical surface including 10 mm thick rendering in cement mortar 1:4, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L vitrified ceramic tiles 09 to 10mm thick (square/rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Description same as per item No 46 above but in vertical surface including 10 mm thick rendering in cement mortar 1:4, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L glazed ceramic coloured tiles, 300mm x 200mm / 300mm x 450mm / 350mm x 450 and 7 mm thick on vertical surfaces such as dados, skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 15mm thick screed bed built in CM 1:4, including rounding of edges wherever required, including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Description same as per item No 49 above but Udaipur green stone slab 16- 18mm thick complete all as specified and directed.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing, including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per item No 51 above but as in skirting or vertical surfaces over & including 10 mm thick rendering in cement mortar 1:4, including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs/PCC block/ tiles of any description or thickness etc. (incl bedding) colour and shape as approved, complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, including all as specified in SSR part I. and including Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs and removing from the site. complete all as specified and directed

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I. and including Dismantling PVC water tanks Exc 500 ltrs but not 1000 ltrs and removing from the site. complete all as specified and directed

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white, flat back/Oval shape of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc and excluding rate of fixing of pillar tap complete.

S & F(in repair) 15 mm dia bore chromium plated concealed stop cock, complete all as specified and directed.

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed.

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repairs 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC union for 25 mm outer dia pipe complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

S & F in repairs Plastic seat cover (for EWC) , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed.

S & F in repair 25mm dia Powder coated curtain rod fixed with modren bracket of any type or any design and provide support at mid for length more than 1.5mtr as approved by Engr -in Charge complete all as specified and directed

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs flexsible metal connection pipe 15 mm dia 600 mm long withnuts at both ends (Suitable for MAP Qtr Basin Mixcer) complete all as specified and directed.

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S&F in repair 15 mm dia bore chromium plated 2 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and as directed.

S & F in repairs15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F in repair Jet Sprey (for EWC) with 1 meter tube and holder, complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.

S&F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge. complete all as specified and directed.

S & F in repair swivel shower rose of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe or union complete all as specified and directed.

S & F in repair SS grating with or without hole complete all as specified and directed.

S & F in repair sink coupling for wash basin/sink complete all as specified and directed.

M & L PCC 1:2:4 type B1 40mm thick, using 20mm graded stone aggregate in flooring and finished surface even and smooth using extra cement, including demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level, complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection and similar work, finished concrete surfaces even and smooth without using extra cement, including demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level, complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete. And incl demolition of old PCC. complete all as specified and directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall/ floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall/floor/ trenches complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S & F in repair 40mm dia bore PVC (SWR) pipe and incl Tee & Bend as required to complete with solvent cement joints, fixed complete all as specified and directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

M & L for appline one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes. 4. Applying 15-20mm thick protection plaster 1:3(Cement : Sand) ration on vertical and horizonal areas admixed with Dr.Fixit Pidiproof LW Plus(Conforming IS 2645 2003) @200ml per bag of cement.

M & L PCC 1:5:10 type E-2 using 40 mm brick bats aggregate as in maas concrete, including demolition lime Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

S&F in repairs corner glass shelf 250mm (10'') long complete as per sample approved by AGE B/R-III complete all as specified.

S & F in repair glass shelf in long size fixed with and including chromium plated brass screws and wooden/plastic cleats.( Min wt 300gms) complete all as specified and directed.

S & F in repair low density polythelene PVC waste pipe 32mm bore and 1 m long for wash basin/sink complete all as specified and directed.

Dismantling wall & ceiling boards (fiber, pulp, insulation etc) or insulating boards/ slabs/ blankets or AC boards any thickness including fillets and frame of any type of any description etc complete all as directed and specified.

M&L 4 mm thick E-Board designer board incl emulsion paint finish (everest or equivalent) tiles for insulation and accoustic purpose 60x60 cm in size fixed with and laid on (including) GI based super fine XL 15mm exposed grid system with 15mm wide T-section flanges. The frame work comprises of main runner of size 15x32mm spaced at 600mm centre securly fixed to the structural soffit by approved hangers at 1200mm maximum centres. Hangers(GI wire 4mm dia) to be fixed by approved roof plug, level adjustment and screws etc and making good disturbed surfaces. complete all as spd and dircted.

M & L water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & vertical surfaces) in following sequence through authorised applicator of the manufacturer all as specified and directed complete including removal of existing treatment. (i) Surface preparation like openening the cracks/removal of loose concrete. (ii) Presssure washing the entire roof to to remove dirt, dust alage fungi or other contaminanats from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores, capillaries and micro cracks. (iv) Fililling the crack with flexible polymer based caulk and further sealing with reinforcement fabricelastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of Dr fixit URP (vii) First and second coat of elastomeric Dr fixit Roof seal. The authorised applicators are as under. (a) P Tech Solution 92 Anurag Nagar Ring Road Indore. (b) MR clean Ventures E-4/402 Arera Colony Bhopal 462016. (c) Property care, 244 D schem No 71 Near Shriji Vatica Indore 452002 Note :- A waranty of 10 years be provided by the contractor.

RK CONSTRUCTION

M/S Sunshine Construction

J B CONSTRUCTION AND DEVLOPERS

Jamna Constructions

GIRIRAJ CONSTRUCTION AND TRADERS

Goyal Construction

sunway associates