SPECIAL REPAIR TO BOUNDARY WALL S N PARK AND ADDN/ALTN TO 02 X BATHROOM AT FIRST FLOOR OF DSOI BLDG (PRESENTLY OFFR MESS OF 43 FD REGT) UNDER AGE B/R-I AND AGE E/M-I OF GE (NORTH ) MEERUT CANTT

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified and directed.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work withsubclass B bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

Excavating in trenches, n. exc 1.5m wide and n. exc foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting gout complete all as specified and directed.

Returning filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for RCC M-20( 1:1.5:3) type A-1, using 20 mm graded stone aggregate as in column footing including raft footings, foundation, plinth beam, bases of columns etc. complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 using 20 mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC 1:1.5:3 Type A1 using 20 mm graded stone aggregate as in colums, pillars etc complete all as specified and directed.

Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

Use and waste form work Square, rectangular or polygonal to sides of columns, pillars etc. of fair finished surfaces complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed.

M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specified and directed.

All as described srl item no 15.00 here-in-before but 5mm dia and over upto and incl 10 mm dia as in Binders, stirrups, spacer complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M & L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface using water proofing compound @ 3% by weight of cement content or as per manufacturer's instruction complete all as specified and directed. Note- integral WPC included in the rate.

M&L for preparation of New surface of of wall by applying 1mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

S&F Mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embeding in concrete and screws etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron filets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint incl one coat of red oxide complete all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

M& L for providing precast cement concrete louvres and jallies 35mm thick (measured solid) for set in cement mortar type c0 1:3:6 (12.5 mm graded aggregate) including all moulding but excluding frame shall be measured separatly and paid complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for mild steel framed work as in doors or gates (Ornamental type where required) of angle or other section with gusset plates, rails, braces, ball bearing etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings incl guard bars/hold fast etc ( exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete fe290(Gde E-165) complete all as specified and directed.

Demolition of cement concrete of ground floor and pavings exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed.

M&L for Hardcore of guage n.exc 63mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L for sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed.

M&L for 60mm thick M-35 grade coloured interlocking tile with pigment over sand cushioning, ineterlocking tiles jointd filled with sand complete all as specified and directed.

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Excavating in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone agreegate as in bed blocks to fencing post complete all as specified and directed

S&F mild steel in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed

Supply only MS galvanised chain link fencinng of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule complete all as specified and directed

S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stanadard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.

S&F mild steel screw bolts(machine made) exceeding 5cm and not exc 10cm long with diameter of shank 11 to 15mm with hexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete alll as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F concertina coil as in fencing with punched tape concertina coil upto 450 mm dia, 10 m openable length having 50 Nos rounds per 6 m length, upto 3.0 m height of wall with existing angle iron Y shaped placed 2.4 m to 3.5 m distance, stud tied with OJ staples and OJ clips to retain horizontally including necessary bolts or OJ barbed wire tied to angle iron,350 to 450 mm dia spirally round shape complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed

M&L for Ceramic glazed wall tiles including designer/digital/ HD/Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.12 Sqm but not exceeding 0.36 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces & incl rendering 10 mm thick in CM 1:4 complete all as specified and directed. Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately

S&F premium range anti skid matt finish premium range vitrified tiles (as approved by GE) area of each tiles exceeding 0.16 Sqm but not exceeding 0.36 Sqm (thickness as specified by the manufacturer) in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces & incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately

S&F wall to wall mirror of 5.5mm - 6.0mm thick fixed over plywood of required thickness complete with hard board ground fixing with rawl plug and fasteners of approved design with CP brass screw and washers i/c rubber wood moulded beading all round mirror etc complete all as specified and directed

S & F in repairs 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed

M&L for powder coated anodised aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed

M&L for powder coated anodised aluminium door shutters sliding type without sash bars, aluminium sections weighing 0.55 Kg/m(min) including sliding arrangement fixed to floor & partitions necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 600- 750 mm complete all as specified and directed Note: 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment ) including taking down old boarding any type.

S&F in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid seprately. (upto a height of 15.0m)

Preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed

M&L for preparation of old/new surfaces of ceiling and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 coat ceiling birla white putty complete all as specified and directed

M&L for applying 1.5mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic plastic emulsion paint (royal shine) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of interior grade primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting .

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed

All as described srl item no 62.00 here-in-before but 25 mm bore pipe complete all as specified and directed

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed

S&F in repairs bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F brass floor door stopper body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed

S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed

S&F in repairs, PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs, PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 600mm Long Braided Hose with M10 x 1 Nipple, 15mm Nuts, O-Ring & Rubber Washers complete all as specified and directed

S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

S&F in repairs CP Soap Dish Holder complete all as specified and directed

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

S&F in repairs 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

S&F PVC bends 75mm bore, any radius complete all as specified & directed.

S&F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed

S&F 110mm PVC (SWR) 'S' trap complete all as specified and directed

S&F in repairs 15 mm dia brass chromium plated Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed complete all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (Jaquar 9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F in repairs hand Shower (Health Faucet) with 1 meter Long Easy Flex Tube in Chrome Finish & wall Hook complete all as specified and directed

S&F in repairs 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed complete all as specified and directed

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Corner Glass Shelf (with Bracket) complete all as specified and directed

S&F in repairs chromium plated towel rail 450 mm long as approved quality complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed

S & F in repairs 15mm CP Two Way Angular Stop Cock with Wall Flange complete all as specified and directed

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan, Stop cock/ angle cock complete all as specified and directed

S&F in repairs SS Toilet Roll Holder complete all as specified and directed

S&F in repairs SS Towel Ring complete all as specified and directed

S&F vitreous china urinal, half stall type white, with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal spreader fixed to water supply pipe etc including fixing of plugs bedding against wall in CM 1:2 complete all as specified and directed

M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick glass all fixed to frame complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

All as described srl item no 97.00 here-in-before but one tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps.

All as descrbed srl item no 97.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 97.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as described srl item no 99.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed

S&F Modular Switch, 1 module, 6A, AC, 240V, one way complete all as specified and directed

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, complete all as specified and directed

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, complete all as specified and directed

S&F Modular Switch, 1 module, 16A, AC, 240V, one way complete all as specified and directed

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed

S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed

S&F LED lamp 2 pin 9/10 watt complete all as specified and directed

S&F LED light fitting 1x20/22 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.

S&F electric water heater storage type steel body and heating element upto 2 KW capacity 25 litre, 5 star rated complete all accessories such as safety valve, thermostate, NRV, connectio piece etc complete all as directed.

CHAUDHARY FURNITURE HOUSE (BID ID -3461338)