REPAIR TO VARIOUS TYPES OF WOODEN FURNITURE INCLUDING PLOSHING/CANNING OF WOODEN FURNITURE UNDER GE (AF) BAMRAULI

Amount

REPAIR TO TABLE COMPUTER

Material and labour for in replacement of top of table computer with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of keboard drawer and side drawer of table computer with fitting of channel and pvc tape edging all as specified and shown in drawing and as directed .

Material and labour for in replacement of CPU, UPS shelf of table ith 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the shelf complete, all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of paint of approved quality with finish complete all as specified and directed.

REPAIR TO LOCKER BED SIDE WOODEN ( FD-54M ) :-

Material and labour for in replacement of top of Locker Bed side wooden with 18/19mm thick one side teak faced pre laminated particle board, ISI Marked including 6mm thick teak wood edging all-round , complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of shutter with 18/19mm thick one side teak faced pre laminated particle board ISI Marked alongwith hinges as per drawing and as specified and directed.

Supply and fixing 100 mm long aluminium handle, ‘D’ type, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of back side of locker bed side with 9 mm thick commercial plywood BWR grade ISI marked , complete, all as specified and shown in drawing and as directed .

Supply and fixing in repair 75mm long , aluminium Hasp and staple, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed .

Supply and fixing in repair CP hanging rod 20mm dia fixed to locker bed side as per drawing and as specified and directed by the Engineer-in-charge.

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

REPAIRS TO VARIOUS TYPE OF CHAIR CONFERENCE:-

Material and labour in replacement for old unserviceable steel base of chair and supply and fixing of new STEEL BASE of make Feda / World Wide / Nobel complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable hydrolic of chair and supply and fixing of new hydrolic of complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable tilt mechanism of chair and supply and fixing of new tilt mechanism of complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable arms of chair any type and supply and fixing of new arms of PU/fibre complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable push back of chair and supply and fixing of new push back of complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old unserviceable wheel of chair and supply and fixing of new wheel of complete all as specified and shown in drawing and as directed.

Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with 32 density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and directed.

REPAIR TO CHAIR SCHOOL WITH HANDBOARD

Material and labour for in replacement of handboard of chair with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of seat of chair all as specified and shown in drawing and as directed .

Material and labour for welding to chair complete all as specified and directed.

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of paint of approved quality with finish complete all as specified and directed.

REPAIRS TO RACK WOODEN :-

Material and labour in replacement for shelf of rack wooden made of 12 mm thick first class teak wood complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for back cover of rack with first class teak complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for side cover of rack with first class teak complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for top cover of rack with class teak complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for bottom cover of rack with class teak complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

REPAIR TO SHOE RACK

Material and labour for in replacement of leg of shoe rack shall be of 25mm dia MS Pipe of 18 Gauge all as specified and shown in drawing and as directed .

Material and labour for in replacement shelves of rack of 20mm MS pipe of 18 gauge welded to legs with 3mm dia MS rod welded to shelf all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of spray paint of approved quality with finish complete all as specified and directed.

WORK STATION

Material and labour for in replacement of top of work staion with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of keboard drawer and side drawer of work station with fitting of channel and pvc tape edging all as specified and shown in drawing and as directed .

Material and labour for in replacement of CPU, UPS shelf with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the shelf complete, all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of paint of approved quality with finish complete all as specified and directed.

TEAPOY VARANDAH MAP

Material and labour for in replacement of top of Teapoy varandah MAP with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and first class teak wood beading all around the teapoy all as specified and shown in drawing and as directed .

Material and labour for in replacement of leg of teapoy made of 55mm dia MS Bars all as specified and shown in drawing and as directed .

Material and labour for in replacement of base tray of teapoy made of 18mm square MS pipe of wall thickness all as specified and shown in drawing and as directed .

Material and labour for in replacement of hard rubber shoe all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of spray paint of approved quality with finish complete all as specified and directed.

REPAIRS TO CHAIR EASY WITH CUSHION

Material and labour in replacement for damaged front leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge

Material and labour in replacement for damaged rear leg of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.

Material and labour in replacement for damaged arm-rest of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge .

Material and labour in replacement for damaged rail of seat and back of Chair easy with well seasoned 1st class Teakwood, all as per drawing and as specified and directed by the Engineer-in-Charge.

Material and labour in replacement for old cloth and cushion for seat and back of chair by taking out seat and back, changing cloth of seat and back with leather / crape or matti of not less than Rs 200/- per meter including changing / replacement of foam cushion of seat and back with high density foam (as approved) of required existing thickness and size including all new hardware and accessories and refixing complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

TABLE EXECUTIVE SIDE RUNNER

Material and labour in replacement for top of Table executive side runner with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of Table executive side runner with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for drawer of Table executive side runner including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .

Material and labour in replacement for back side of Table executive side runner with 9 mm thick commercial ply wood complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for shelf of Table executive side runner with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed .

Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

REPAIR TO SIDE BOARD (FD – 26 M / 241) :-

Material and labour in replacement for top of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of side board with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed.

Material and labour in replacement for drawer of side board including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .

Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed.

Material and labour in replacement for shelf of side board with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed.

Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed .

Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed.

TABLE BED SIDE

Material and labour in replacement for top of Table Bed Side with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of Table Bed Side with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for door shutter of Table Bed Side with 18/19 mm thick one side teak faced pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around complete all as specified and shown in drawing and as directed.

Material and labour in replacement for drawer of Table Bed Side including CP knob fixed to each drawer complete all as specified and shown in drawing and as directed .

Material and labour in replacement for back side of Table Bed Side with 9 mm thick commercial ply wood , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for shelf of Table Bed Side with 18/19 mm thick particle board , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for leg of Table Bed Side of required size made out of well seasoned 1st class Teak wood, complete all as specified and shown in drawing and as directed .

Material and labour for preparation of old treated or new wood or wood based surfaces of side board and applying two coats of French polish all as specified and directed.

REPAIR TO HAT STAND WITH MIRROR (FD-23 & 261)

Material and labour in replacement for Looking Mirror of size 440mm x300mm x 5.5mm of approved quality (Make - Modi guard/Saint Gobin/Swastic) duly fixed with beading of size 35mm x 6mm made out of well seasoned teak wood duly finished all as per drawing and as directed by the Engineer in Charge.

Material and labour in replacement for Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as per drawing and directed by the Engineer in Charge

Material and labour in replacement for MS plate for hanging of Hat stand as per approved sample shall be fixed to the back of the hat stand as shown on the drawing and as directed by the Engineer in Charge.

Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand as shown on drawing and as directed by the Engineer in Charge.

Material and labour in replacement for Plywood 6mm thick commercial (Make-Green Ply/ Century / Archid) confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown on drawing and as directed by the Engineer in Charge.

Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head ess nails at the front side of hat stand as shown on drawing and as directed by the Engineer in Charge.

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

REPAIR TO BIN SOILED LINEN (FD - 70 M, FD-244, FD-212)

Material and labour in replacement for New top of Bin soiled made out of 18/19mm thick wooden plank of seasoned teak to the the existing teak wood frame all as per drawing and as directed by the Engineer-in-Charge.

Material and labour in replacement for New sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19mm thick wooden plank all of seasoned teak as per drawing as and directed by the Engineer-in-Charge .

Material and labour in replacement for New legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden pank of seasoned leak wood all as per drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for Back of bin soiled made out of 18/19mm thick wooden plank of seasoned teak and all as per drawing and as specified and directed by the Engineer-in-Charge

Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

REPAIR TO TABLE DRESSING LADIES (FD-251,FD-32,FD-378,FD/MAP-II/07) :-

Material and labour in replacement for sliding glass shutter of size 300mm x 290mm x 5 mm thick complete including sliding wheels and aluminium channel complete , all as per drawing and directed by Engr-in-Charge

Material and labour in replacement for leg of table dressing of required size made of well seasoned 1st class Teak hard wood complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of table dressing with 18 / 19 mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 , ISI marked complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for back of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for top of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

TABLE DRESSING GENTS WITH MIRROR (FD-31 /FD 233 / 379/MAP-16 )

Material and labour in replacement for top of table dressing gents of size 900mm x300mm with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for bottom of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for side of table dressing with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for back of table dressing gents with 12mm thick teak wood planks , complete, all as specified and shown in drawing and as directed .

Material and labour in replacement for drawer of table dressing gents with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed.

MATERIAL AND LABOUR FOR PREPERATION FO SURFACE INCLUDING SCRUBBING WITH SAND PAPER, FILLING WITH PUTTY WHERE REQUIRED AND POLISHING TO THE FOLLOWING WOODEN FURNITURE ITEMS APPLYING TWO COATS OF FRENCH POLISH ALL OVER COMPLETE AND AS DIRECTED BY ENGR-IN-CHARGE.

Bed Hard ply wood top

Bin soild linen Small

Book case

Chair dining

Side Board

Table centre FD

Table dressing ladies with mirror

Chair dining with cushioned

Chair Easy

Chair writing

Hat stand with mirror

Peg Table FD

Screen movable

Sofa set single

Sofa two seater FD-281

Sofa 3 seater FD

Sofa set 5 seater with cushion

Table dining for 6 pers

Table dining 8 pers

Table writing

Teapoy wooden

MATERIAL AND LABOUR FOR DRY CLEANING FOR CLOATHING, TEXTILES AND UPHOLESTRY USING A CHEMICAL SOLVENT OTHER THAN WATER AFTER PREPERATION OF SURFACE INCLUDING REPAIR AND STICHING TO THE FOLLOWING FURNITURE ITEMS ALL OVER COMPLETE AND AS DIRECTED BY ENGR-IN-CHARGE.

Sofa 5 seater with cushion TP

Sofa 4 seater with cushion TP

Sofa 3 seater with cushion TP

Sofa 2 seater with cushion TP

Sofa single seater with cushion TP

Chair dining with cushioned

Chair easy with cushioned

Chair writing with cushioned

RECANNING OF VARIOUS TYPES OF CHAIRS/ STOOL WITH PLASTIC CANE HALF ROUND 2MM WIDE 0.35 MM THICK (4MM WIDE SEMI ROUND FOR BORDER) BEST QUALITY AS PER GODREJ PATTERN INCLUDING REMOVING OF OLD CANE COMPLETE ALL AS SPECIFIED AND DIRECTED. MAKE OF CANE: PRIMIER.

Recanning of wooden Writing chair

Recanning of wooden Dining chair

Recanning of wooden Chair Easy

Recanning of wooden Stool CB

Material and labour for re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier.

Material and labour in replacement for worn out material ie PVC Seat and back from chair verandah,and fixing suitable PVC seat for FD-256/359 of make M/S polymer or equivalent of weight not less than 1.83 kg per pair (seat & back) complete all as specified and directed. Make of cane : Premier.

Material and labour for preparing of old surface of chair verandah steel and applying one coat of synthetic enamel white paint including provision of 4 Nos rubber shoes for each chair complete all as specified and directed.

Material and labour for welding to chair varandah complete all as specified and directed.

REPAIR TO CHAIR DINING

Material and labour in replacement for damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged rear leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge

Material and labour in replacement for damaged back rest of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged stiffener of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged side rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged front rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for damaged back rail of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge.

Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial vennered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeabl 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.300/- per meter. All as per drawing and as specified and directed by the Engineer-in-Charge

POLISHING OF VARIOUS TYPE OF TP FURNITURE WITH DUCO PAINT OR EQUIVALENT BY SCRUBING OF TOP MELAMINE POLISH WITH WATER PAPER AND APPLYING TOW COAT OF DUCO PAINT WITH PROPER SPRAY PAINTING MACHING AND GUN TO GIVE IT AESTHATIC AND UNIFORM LOOK AFTER APPLYING TOW COAT OF MELAMINE EITHER GLOSSY OR RAFT AS REQUIRED COMPLETE ALL AS SPECIFIED AND DIRECTED BY ENGR-IN-CHARGE

Table Executive

Chair visitor wooden

Pedastal with drawer

Table Peg with Glass top

Center table with Glass top

Show case

Sofa TP legs

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

Bharat Trading Company

M S Enterprises

Mohit Enterprises

R K GUPTA AND SONS

M/S SWASTIK BUILDERS

UNIQUE FYRNITURE

ASHOKA FURNITURES