Welcome maint and certain B/R items to Offrs Md Accn in Area-IV under AGE B/R (W) at Colaba, Mumbai

Amount

Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls complete by an authorised applicator, complete all as apecified and directed.

All as per item No. 1 mentioned here-in-above but on ceiling surface, complete all as specified and directed.

Material and labour for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as apecified and directed.

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old surfaces with one or more coats, complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for the prepration of wall including Complete removal of existing treatment and applying 2 mm thick (average) wall care care putty, rubbing with sand paper, for making the wall surface to receive any applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint, complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement, complete all as specified and directed.

M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement, complete all as specified and directed.

M&L for Preparation of newly plastered ceiling surfaces and applying two coats of OBD over a coat of primer, complete all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying 2 mm thick (average) wall care putty, rubbing with sand paper and applying two coats of distemper oil emulsion distemper over a coat of alkali resistant primer, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed.

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc), complete all as specified and directed.

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc), complete all as specified and directed.

S&F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan, complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (Wall mounted) white, including trap, connection to drain and flushing pipe including seat cover for pedstal pan, complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of suitable size, complete all as specified and directed.

S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair 15mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450mm, fixed in repair, complete all as specified and directed.

S&F in repair 15 mm bore fancy type two way bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

M&L in repair for 15mm bore fancy type wall mixer with 115mm long bend pipe for connection to over head shower (with bush and piston Divertor fittings) with aerator, complete all as specified and directed.

S&F in repair 15mm nominal size, central hole basin mixture with U shaped round casted spout with 450mm long pipe connection with aerator, complete all as specified and directed.

M&L in repair 15mm bore fancy type health faucet with SS hose, complete all as specified and directed.

M&L in repair fancy type CP Towel Rail 61cm long, complete all as specified and directed.

M&L in repair CP Towel Ring, complete all as specified and directed.

M&L in repair CP soap dish, complete all as specified and directed.

M&L in repair CP toilet paper holder, complete all as specified and directed.

M&L in repair CP Towel Bracket (61cm) long, complete all as specified and directed.

S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed.

Supply and fixing in repair 15 mm bore over head rain shower, 200x200mm size, single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 305mm mm long (light weight) square shape with wall flange, complete all as specified and directed.

S & F as in repair SS grating round 125mm size of anti- cockroach, anti-clog, anti faul etc, complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy,with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts, complete all as specified and directed.

S& F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330mm x 160mm, complete all as specified and directed.

M&L in repair 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick, complete all as specified and directed.

M&L Figured glass pin headed ordinary quality and glazing with oil putty in square n.exc 0.50 sqm each pane 3 mm thick, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc, complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed.

M&L Glazed tiles digital coloured ceramic tiles 300x450x7/ 600x300mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match, complete all as specified and directed.

M&L Vitrified light shade coloured ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Vitrified light shade coloured ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&LVirified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L HI-Gloss digital ceramic tiles tiles in vertical surface tile of size 600mm x 1200mm 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufacture instruction.

S&F in repair 20 mm dia decorative type curtain rods SS and all other connected works, complete all as specified and directed.

S&F in repair 20 mm dia decorative type curtain Brackets of SS alloy, including fixing in position and all other connected works, complete all as specified and directed.

S&F Stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600mm including screws, complete all as specified and directed.

S&F in repair 100 mm butt hinges medium weight cold rolled stainless steel, complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled stainless steel, complete all as specified and directed.

S&F 110 mm butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repair 75 mm butt hinges medium weight cold rolled stainless steel, complete all as specified and directed.

S&F in repair 75 mm butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repair aluminium anodised 200 mm barrel tower bolts of extruded section, complete all as specified and directed.

S&F Aluminium anodised 200 mm barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repair aluminium anodised 75 mm barrel tower bolts of extruded section, complete all as specified and directed.

S&F Aluminium anodised 75 mm barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repair aluminium handle 150 mm cast type anodised, complete all as specified and directed.

S&F Aluminium handle 150 mm cast type anodised, complete all as specified and directed.

S&F in repair aluminium handle 75 mm cast type anodised, complete all as specified and directed.

S&F Aluminium handle 75 mm cast type anodised, complete all as specified and directed.

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

Resecuring or easing & adjusting, without taking down shutters of any description exc 1.00 sqm but not exc 2.00 sqm, complete all as specified and directed.

Taking down shutters of any description n.exc. 1.00 sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1.00 sqm but n.exc. 2.00 sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 2.00 sqm each, complete all as specified and directed.

Taking down Chowkhats or frames exc 1.50 sqm but n exc 4.00 sqm each, complete all as specified and directed.

S&F 18 to19 mm thick HDHMR board, prelaminated one side with decorative choice lamination & other side high glossy acrylic sheet of 3mm thick, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works, complete all as specified and directed.

S&F 18 to19 mm thick HDHMR board, prelaminated on both side, exterior grade, fixed with screws to frame work as in cup borad & kitchen cabinet shutters and all other similar works, complete all as specified and directed.

S&F of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver, complete all as specified and directed by Engr-in-Charge.

S&F of Stainless steel cabinet / drawers handle having a length of 200mm and shape, complete all as specified and directed.

S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters (any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats, complete all as specified and directed.

S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b), complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood face panel, commercial type on both side, complete all as specified and directed.

M&L for Preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint, complete all as specified and directed.

M&L Preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats,etc. area tarred exc 0.1 sqm but n. exc. 0.5 sqm each, complete all as specified and directed.

M&L Preparation of wood and wood base materials, new or old, of any description and girth, not otherwise described, and treating small articles such as holdfasts, end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each, complete all as specified and directed.

M&L PCC (1:3:6) type C-1 (20 mm graded aggregate) as in bed blocks for hold fast including necesssary formwork, complete all as specified and directed.

S&F Mild steel flat iron as in hold fast clamps articles conforming to FE 410 -O or FE 310-O, complete all as specified and directed.

Machine Grinding/rubbing/polishing to Terrazzo tile surfaces to mirror finish, complete all as specified and directed.

S&F PVC 3D Decorative varrious pattern modern style 5-6 mm thick water proofing wall paper before complete removal of existing treatment by scrapping with mechanical wall sander having cart part Trucare series H-01 with variable speed control 1500-2700 RPM (having mechanical vacuum mechanism) sanding pad of 180mm having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour fixing on wall using top guard glue adhesive fixed, complete all as specified and directed. Note:- Wall paper shall be as approved by GE.

S & F in repairs to 9 feet pulley operated cloth drying system, aluminium anodised 20mm dia pipes, chanel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed, complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009, complete all as specified and directed.

S&F Powder coated aluminium frame of any colour (minimum thickness of powder coating 50 micron) for doors/windows/ ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side, complete all as specified and directed.

M&L in repair for 5.50 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm, complete all as specified and directed.

Supply and fixing in repair door/ cupboard lock brass 6 lever multipurpose lock of size 100mm, complete all as specified and directed.

S&F in repair Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and directed.

S&F as in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair stainless Steel 304 Grade Dual Folding Towel Rack for Bathroom/ Towel Stand/ Hanger/ Bathroom Accessories (24 Inch-Chrome), complete all as specified and directed.

S&F Magnetic catcher suitable for kitchen cabinet shutter, complete all as specified and directed.

S&F for Mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs, complete all as specified and directed.

S&F Stainless steel peg set of six suitable size of length complete etc, complete all as specified and directed. Make Prayag Cat No BEA 30/ Equalent make.

M&L for Plastering15-20 mm thick (Avg) epoxy based Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction, complete all as specified and as directed by Engr-in-Charge.

M&L for PVC Wall Lining consisting of 5mm thickt wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl PVC fillets of width 35mm fixing to the wall to make PVC, complete all as specified and directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

Material & Labour for complete removal and applying Two or more coats of 100% elastomeric acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface, complete all as specified and directed.

S&F Tumbler holder -Gold bright PVD, complete all as specified and directed.

S&F Grab bar of stainless steel 300 mm long of make Jaquar Cat Part No AHS-CHR-1501 or equivalent of Kholer, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed.

Material and labour Granite (of any type and colur) 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

S & F in repairs Mortice night latch, size 65mm, mild steel, 4 levers, complete all as specified and directed.

S & F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape, complete all as specified and directed.

S & F in repairs of stainless steel modular thali-plate basket SS 304, size of 520x485x200mm, heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg, complete all as specified and directed.

S & F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg, complete all as specified and directed.

S & F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer soft closing channel, complete all as specified and directed.

S & F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer soft closing channel having weighing capacity of 6 kg, complete all as specified and directed.

S & F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg complete all as specified and directed.

S & F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed.

S & F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic soft closing drawer channel having weighing capacity of 25 kg, complete all as specified and directed.

S&F for joist,channel, angle or tee sections or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas, complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc primer, complete all as specified and directed.

S&F in repair wash basin/kitchen sink collapsible waste pipe outlet upto Nahni trap, complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

RAMESH ENTERPRISES (BID ID -3328073)

RUPESH CONSTRUCTION CO (BID ID -3328330)

NATH CONSTRUCTION (BID ID -3324116)

SAHI SAGAR ENTERPRISES (BID ID -3323597)

jkconstruction (BID ID -3326711)

SHIV ENTERPRISE (BID ID -3323877)

N.S.ENTERPRISES (BID ID -3328107)

SHREE SHIV SHANKER ENTERPRISE (BID ID -3325385)