SPECIAL REPAIR TO BLDG NO LS 04 (ERSTWWHILE APPS BK) AT SHILLONG AND PROVN OF CERTAIN ADDN ALTN IN BLDG NO MES 67 (ROI) AND REPLACEMENT OF CGI SHEET FALSE CEILING TILING OF FLOOR AND ELECRIC FITTING IN BLDG NO BT 20 OF 101 AREA PRO UNIT UNDER GE SH

Amount

Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specifed and as directed.

Dismantling Timber scantlings 40 sq.cm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specifed and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specifed and as directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specifed and as directed.

Taking down shutters of any description exc 1.0 Sqm but nexc 2 sqm refixing in same opening complete.

Taking down shutters of any description exc.1.0 Sqm but n.exc 2.0 sqm each complete all as specifed and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specifed and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specifed and as directed.

Dismantling of floor hearth (or) wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifed and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specifed and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for incl (reinforcement cut as reqd to facilitate demolition) complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specifed and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specifed and as directed.

M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

S&F GI Frame work for snagrid false ceiling comprinsing of GI perimeter channel 0.55mm thick with main T - flange of 25mm and web of 30mm fixed to surrounding wall angle with flange and web 25mm each , cross T with flange 25mm and web 25mm fixed to main T , main T is suspended from soffit @ 1200 mm C/C using GI wire of 4mm thickness GI frame will be 60cm x 60cm to receive E-board celling complete all as specified and as directed..

M&L for 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

M&L for 2nd class hard wood in scantling clean sawn timber fixed complete all as specifed and as directed.

M&L fpr preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote oil complete all as specifed and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification complete all as specifed and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing complete all as specifed and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specifed and as directed.

M &L for 35mm thick of 2nd class hard woodglazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specifed and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) incl stainless steel wire cloth complete all as specifed and as directed.

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specifed and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for precast concrete 1:2:4, Type B-1 using 20 mm gradded stone aggregate in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face etc. set in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.36 sqm but nexc 1.00 sqm in floors laid over and incl. 20mm thick in CM ( 1:6 ) screed bed jointed in neat cement slurry pointed with coloured cement to match the tiles complete all as specifed and as directed.

All as Per Item no 37above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specifed and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specifed and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thick CM 1:6 screed bed jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specifed and as directed.

All as Per Item no 40 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 complete all as specifed and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete complete all as specifed and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specifed and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specifed and as directed.

M & L for glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid rendering over 10mm thick CM 1:4 , complete all as specified and as directed.

S&F 18/19 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 12 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete width of flap 30mm complete all as specifed and as directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specifed and as directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specifed and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specifed and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specifed and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specifed and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specifed and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item above here–in–before, but for 20mm dia (Bore) complete all as specifed and as directed.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware complete all as specifed and as directed.

S&Fin repairs Towel ring square shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag complete all as specifed and as directed.

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag complete all as specifed and as directed.

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware complete all as specifed and as directed.

S&F in repairs vitreous China under counter basin oval shape with fixing accessories table top WHB of make Jaguar Cat Part No:-FLS-WHT-5701 size 555 x 425 x 195 mm incl waste coupling of Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware complete all as specifed and as directed.

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed

M&L for 3 hole basin Mixer without pop up waste system, 20mm cartridge system Cat No- FLR-5189N of M/s Jaquar or equivalent complete all as specifed and as directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specifed and as directed.

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specifed and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specifed and as directed.

S&F butt hinges 100 mm extruded brass with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specifed and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specifed and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specifed and as directed.

Excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft /loose soil complete all as specifed and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specifed and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specifed and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation complete all as specifed and as directed.

M&L for foundations, including raftfs, footings , plinth beams, bases for columns etc type nominal mix (1:1.5:3) (20 mm graded aggrgate) complete all as specifed and as directed.

S&F iron angle for water tank staging and like structures incl caps, bases , splices etc built up from two or more angles including stiffeners, gusse plates etc complete of Fe-290 (Gde E 165) all as specified and as directed

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specifed and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specifed and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 and mixing with WPC @ of 3% by weight of cement finished even and smooth without using extra cement complete all as specifed and as directed Note :- WPC shall be measured and paid separtely as supply only.

Supply only Integral waterproofing compound complete all as specifed and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specifed and as directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered or riveteted or forged into spikes, framed guard bars conforming to FE 290 Gde E-165 complete all as specified and directed.

M&L for rotational moulded Polythene water storage tank 1000 Ltr capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl all fittings as reqd complete all as specifed and as directed.

M&L for cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed.

M& L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specifed and as directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm ditto complete all as specifed and as directed.

M & L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specifed and as directed.

M& L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specifed and as directed.

M&L for preparation of new wall surfaces and applying two coats of oil bound distempering over 1mm of wall care puttycomplete all as specifed and as directed.

M&L for preparation of new wall surface and applying two finishing coats of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specifed and as directed.

M&L for complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistance , dirt resistance exterior paint of required shade including 01 mm thick wall care putty on wall surfaces complete all as specifed and as directed.

M&L for complete removal of existing treatment old decorated wall surfaces and applying two finishing coats of oil bound distempering over 1mm of wall care putty incl complete all as specifed and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide zinc chromate primer all as specified and as directed.

M&L for preparation of old/ new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F in repairs 20 mm dia harrison rails, chromium plated with wooden finished fancy type with fixing brackets stops , rollers etc all complete all as specifed and as directed.

S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified.

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm incl dismantling of old unsv one complete all as specifed and as directed.

M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm all as specified.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specifed and as directed.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing complete all as specifed and as directed.

M & L 75mm thick PCC 1:3:6 type D2 as in plinth protection complete all as specified and as directed.

M&L for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed.

S&F in repairs of roller blinds of wooden finished material or any other pattern as approved by GE width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge

Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work.

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

M&L 12 mm thk toughened sheet clear glass incl edges bevelled /rounded incl grinding / cutting complete with all fittings/ washers/handlesand bolts complete all as specified and directed.

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

PART -II SCHEDULE E & M Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

Description all as per Srl item No 116 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.116 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 116 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F Mirror wall mounted LED batten fittings with all accessories 1X 12 Watt LED 6000K , warm white / white type extruded polycarbonate, integrated electronic driver and fixed to wall complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips cat Part 31403 12-Watt LED picture Light (Gold)

S & F Wall bracket decorative LED fitting 2 light opal glass with chrome finishing warm white /white type with lamp 12 Watt complete with necessary connection complete Make- Jaquar Cat part KCH-CHR-MB160275532B

S & F Exhaust fan 230 volts , 300mm, heavy duty steel body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one Make Bajaj/Havell's/CG.

Supply and fixing LED 3 light clear glass, rose gold mesh with chrome finishing pendent IP65 protection, better optics for uniform distribtion warm white / white type complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. MAke- Jaquar cat No- JNL-CHR-MD 160020053B

S & F Philips 11.5 Watts Smart Lightstrip Plus with suitable size LED driver warm white / white type and fixed in ceiling / wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings Make- Philips Cat part No- 915005240701

S & F Slim desingn LED recessed round/square type down lighter 06 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified Make- CG Cat Part No- LCDEP-06-WW

S & F Slim desingn LED recessed round/square type down lighter 12 watt warm white / white type flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified Make- CG Cat Part No- LCDEP-12-WW

S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete warm white / white with all accessories including taking down old unserviceable one Make HAVELLS /Philips/Bajaj/CG

S&F lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.

S&F integral decorative LED bollard 8 watt with lamp and all accessories including taking down old unserviceable one Make Havells Cat Part No BAMPOOBL8WLED830SSYMTOPCM LED or equivalent Philips / CG.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe.

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Supply and fixing Flexiable cable 6 Sqmm Weather proof single flat twin core cable including pvc pipe 20 mm dia clmple nut bolt etc. complete all as specified and directed

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No 145 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No 145 above but for one bell point controled by one bell push .

Description all as per Srl item No145 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No145 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix bell Push (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

S & F call bell ding dong AC 230 V single pole ISI amrked all as specified and directed Make Havells / Anchor /Legrand

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings complete all as specified and as directed

S & F wall light fitting (Florette) Alabaster glass for diffused light effect, recommended to use with energy saving lamp and synchonised design concept with 4 watt complete with necessary connection compelete all as specified and as directed Make- Havells Item code- LHFOAIC1TZ11010

S & F recesss mounted low glare luminaire 28 Watt PLUTO NEO 2 X 2 complete with all accessories including taking down old unserviceable one complete all as specified and as directed Make HAVELLS Cat Part Plutoneo2X2Plr28Wled857s equivalent model from Make Bajaj/CG

S&F bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing of size 15mm complete all as specified and as directed

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall complete all as specified and as directed and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with 100 Amps MCCB as incomer complete all as specified and as directed. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one complete all as specified and as directed

Supply and fix in repair MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed Make: Havells Cat part No - DHMCCDPF006-032 or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

M & L for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing / capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm as cable and one run of 6 sqmm cable earth wire and one run of PVC casing / capping shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L for Sub main wiring with two runs of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Casing / capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm as PVC cable and one run of 4 sqmm as earth wire and one run of PVC casing / capping shall be measured as one RM

Excavation in trenches not exceeding 1.5mtr. In depth and not exc 1.5mtr in width and getting out in soft/ loose soil for laying of cable complete all as specified and as directed

Returning ,fillling in trenches,spreading ,levelling,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material/ surplus soil and depositing where directed at a distence not exceeding 50mtr.at a level not exceeding 1.5 mtr from starting point complete all as specified and as directed

Supply lay/spread in trenches , river sand ,clean ,including spreading ,levelling ,punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection complete all as specified and as directed

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and as directed

M/S T N CONSTRUCTION