REPAIR MAINTENANCE OF UNSV EXTERNAL LIGHTING IE STREET LIGHT SECURITY LIGHT PERIMETER LIGHT ETC AND MISC PLANTS DG SETS INCLUDING CONNECTED WORKS SPARES UNDER RC PEAK SAMNABANJ AND DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

M&L for dismantling /opening of alternator of DG Set by disconnection of cable connections and flexible coupling, nuts/bolts and alternator foundation nut, bolts including opening of earth strip opening of alternator and checking out burnt out Winding of DG Sets of capacity 200KVA to 500 KVA and taken back in temporary platform all as specified and directed.

All as per Sr item No. 01above but DG Sets of capacity 62.5 KVA .

All as per Sr item No. 01above but DG Sets of capacity 35 KVA .

Taking out burnt armature, winding wire and rewinding of armature with super enamelled copper winding wire of existing gauge for 10KVA to 200 KVA set wire DG sets.

Taking out burnt field coil and rewinding of field coil with super enamelled copper winding wire of existing gauge for 10KVA to 200 KVA sets.

M&L for insulation of armature with Class ‘B’ insulation and Varnishing of armature winding and drying up to desired temperature for 200 KVA to 500 KVA DG Sets.

All as per Sr item No. 06above but DG Sets of capacity 62.5 KVA

All as per Sr item No. 06above but DG Sets of capacity 35 KVA

M&L for insulation of field coils with Class ‘B’ insulation and varnishing of field coils and drying up to desired temperature for 200KVA to 500 KVA Alternator of DG Sets.

All as per Sr item No. 09 above but DG Sets of capacity 62.5 KVA

All as per Sr item No. 09 above but DG Sets of capacity 35 KVA

Re-assembling of rotor and stator after rewinding and re-fixing of Alternator with Engine by assembling flexible coupling with alternator mounting with nuts, bolts including making cable connection complete including testing and commissioning at desire load of DG Set of capacity 200KVA to 500KVA complete all as specified and directed.

All as per Sr item No. 12 above but DG Sets of capacity 62.5KVA

All as per Sr item No. 12 above but DG Sets of capacity 35 KVA

Dismantling of radiator and repair by welding/soldering of radiator fins and re-fixing the same after de-scaling and brazing and cleaning of radiator with caustic soda and hydrochloric acid including replacement of radiator foundation nuts, bolts (where ever required) complete all as specified and directed.

S&F in repalacement of Controller/ PCB with (± / - 15VDC) out put for hall effect sensor of existing type and make.

.S&F in repalacement Actuator with spring (sedemac make) existing type and make.

S&F in repalacement V belt /Grooved complete set for the capacity of DG Sets 35KVA to 63KVA approved make for the DG set existing type and make. .

S&F in repalacement V belt /Grooved complete set for the capacity of DG Sets 200KVA to 500KVA approved make for the DG set existing type and make. .

S&F in repalacement Filter Header (For L.O & Fuel filter) of existing type and make.

S&F in repalacement Cyl.Head Sub assly (with valves) of existing type and make.

S&F in repalacement of Lub oil filter mounting assembly of existing type and make.

S&F in repalacement battery terminal of batteries of capacity upto 12 Volt 180 AH.inculding nuts and bolts of DG set capacity 35KVA to 500KVA complete all as specified and directed.

S&F in repalacement Leak OFF pipe assly of existing type and make.

S&F in repalacement Set of high pressure pipes of existing type and make.

S&F in repalacement Lub oil pipe of existing type and make.

S&F in repalacement Start Stop card RB electronics of existing type and make.

S&F in repalacement Nozzle Leak OFF pipe assly of existing type and make.

S&F in repalacement Realy board 8ch ,2c/o,12DC of existing type and make.

S&F in repalacement Fuel Pipe for filter (pre- filter to take unit). of existing type and make.

S&F in repalacement Fuel return pipe of existing type and make.

S&F in repalacement 1.1 Ltr Duel Fuel filter w/o over flow valve. of existing type and make..

S&F in repalacement Air cleaner assembly (Air cleaner + Strap). suitable DG Set for capacity 200KVA to 500KVA of existing type and make.

S&F in repalacement Air cleaner assembly (Air cleaner + Strap). suitable DG Set for capacity 35KVA to 62.5KVA of existing type and make..

S&F in repalacement Slienicer suitable DG Set for capacity 200KVA to 500KVA of existing type and make.

S&F in repalacement Slienicer suitable DG Set for capacity 35KVA to 62.5KVA of existing type and make.

S&F in repalacement injector with nozzle of existing type and make.

Servicing of DG Set draing out used Engine oil of DG Set and cleaning sump completely with re-filling of engine oil 15 W 40 in sealed drum after taking out un-serviceable engine oil from oil sump (Note- Oil 15W40 shall be measured and paid separetely under relevant item as supply only.

S&F in repalacement fuel filter (primary and secondary) of DG Set of capacity 500KVA of existing type and make.

S&F in repalacement fuel filter (primary and secondary) of DG Set of capacity 200KVA of existing type and make.

S&F in repalacement fuel filter (primary and secondary) of DG Set of capacity 35KVA to 62.5KVA of existing type and make.

S&F in repalacement oil filling body for DG Set capacity of 500KVA of existing type and make.

S&F in repalacement oil filling body for DG Set capacity of 200KVA of existing type and make.

S&F in repalacement oil filling body for DG Set capacity of 35KVA.to 62.5KVA of existing type and make.

S&F in repalacement of Rubber Hose pipe complete set for the capacity of DG set 35KVA to 63KVA of existing type and make.

S&F in repalacement of Rubber Hose pipe complete set for the capacity of DG set 200KVA to 500KVA of existing type and make.

S&F in repalacement Turbo charger for HA 494TC Stage capacity 200KVA to 500KVA of existing type and make.

S&F in repalacement Turbo charger for HA 494TC Stage capacity 35KVA to 63KVA of existing type and make.

S&F in repalacement Cylinder Head assly of existing type and make.

S&F in repalacement Combine leak off pipe (Injector to fuel filter) of existing type and make.

S&F in repalacement Alternator starter 12 Volts of DG Sets complete all as specified and directed by Engr- in- Charge.

S&F in repalacement Alternator starter 24volts of DG Sets complete all as specified and directed by Engr- in- Charge

S&F in repalacement Governer Assembly. 500kva Make of Kirlskar (Lucas) or as approved by GE.

S&F in repalacement Governer Assembly. 200kva Make of Kirlskar (Lucas) or as approved by GE.

S&F in repalacement Governer Assembly. 35kva to 62.5 Make of Kirlskar (Lucas) or as approved by GE.

S&F in repalacement stop solenoid assembly 12V DC for micro pump (two coil) heavy duty electrical control make energise to stop of DG Sets all as specified and directed by Engr-in- Charge.

S&F in repalacement battery cable assembly ( -ve & +ve ) uninywin 4 length of existing type and make.

S&F in repalacement variable speed DC genset controller of existing type and make.

S&F in repalacement inter connection battery cable lead (copper) with terminal size 35 sq mm (30 cm long).(as per sample).

Supply and filling coolent for radiators. K Cool super Plus -50:50 premix complete all as specified and directed by Engr-in-Charge. Make : Super Plus or equivalent .

S&F in repalacement AVR S/F variable speed DCDG suitabler for DG Sets of capacity 500KVA. of existing type and make.

S&F in repalacement AVR S/F variable speed DCDG suitabler for DG Sets of capacity 200KVA. of existing type and make.

S&F in repalacement AVR S/F variable speed DCDG suitabler for DG Sets of capacity 35KVA to 63KVA of existing type and make.

Supply and filling Disttled water for battery.

S&F for repalacement of Flexible pipe of M30 X 1.5 union both side,1400mm long of existing type and make..

Supply Engine Oil 15W 40 in sealed drum all as specified and directed.

Supply and fix for replacement Drain Pipe of DG Sets of capacity 35KVA to 200KVA of existing type and make.

M&L for Over hauling Fuel injector pump from DG set carefully, transprotation of the same to civil work-shop for repair & complete service of FIP pump and calibration on automatic setting machine, shifting of FIP pump from civil work-shop to worksite and re-fixing the same to DG set and testing complete capacity 500KVA.

M&L for Over hauling Fuel injector pump from DG set carefully, transprotation of the same to civil work-shop for repair & complete service of FIP pump and calibration on automatic setting machine, shifting of FIP pump from civil work-shop to worksite and re-fixing the same to DG set and testing complete capacity 200KVA.

M&L for Over hauling Fuel injector pump from DG set carefully, transprotation of the same to civil work-shop for repair & complete service of FIP pump and calibration on automatic setting machine, shifting of FIP pump from civil work-shop to worksite and re-fixing the same to DG set and testing complete capacity 35KVA to 63KVA

Dismantling / Taking down the 63KVA DG Set (Eninge and Alternator ) assembly / parts for carrying out / replacement of following spare parts at site and re-assembling the DG Set after repair and testing complete. Spare parts replaced shall be measured and paids as supply only under following items :-

Supply only of Piston Ring.set of existing type and make.

Supply only of Cylinder liner with joints rings of existing type and make.

Supply only of valve cylinder head assly of existing type and make.

Supply only of valve seat insert (inlet) of existing type and make.

Supply only of valve Guide Cyl head of existing type and make.

Supply only of Valve collet (3-grove)lock of existing type and make.

Supply only of Cylinder head gasket of existing type and make.

Supply only of Sets of Jointst(Engine Gasket set complete) of existing type and make.

Supply only of Crank oil seal front of existing type and make.

Supply only of Crank oil seal rear of existing type and make.

Supply only of Thrust washer of existing type and make.

Supply only of connecting rod bearing(cell) of existing type and make.

Supply only of Main general bearing(cell) of existing type and make.

Supply only of Fuel Filter Element of existing type and make.

Supply only of Oil Filter Element of existing type and make.

Supply and filling of Engine oil 15/30 of existing type and make.

Supply only of Connecting rod bush of existing type and make.

Supply only of wiring harness assembly (LOP,ELECTRICAL,LOT,START,WITHOUT ALTERNATOR) of existing type and make.

Supply only of Oil pump assly Cat Part No.03.010.50.0.00.of existing type and make.

Supply only of Piston assembly.Cat Part No.0185-5914 of existing type and make.

Supply only of Harness,wiring engine KTA -38. Cat Part No.AX1013031 of existing type and make.

Supply only of Fan Belt of existing type and make.

Supply only of Copper Washer of existing type and make.

Supply only of Fuel pipe complete of existing type and make.

Supply only of Air Cleaner Element of existing type and make.

Supply and filling of K Oil Super One liters Can of coolent

Supply only of Expansion below from 3R - valve genset.of existing type and make.

Supply only of variable speed DC Gen Set controller of existing type and make.

Supply only of AVR of existing type and make.

Supply only of Residential Slienicer of existing type and make.

Repair /Turner job of Cylinder head assly (valve set fitting,valve guide fitting,valve grinding and fitting (turner job) taking out from DG set carefully, transportation of the same to civil work-shop for repair & complete service and calibration on automatic setting machine and civil work-shop to worksite capcity of DG set 35KVA to 63KVA.

Repair /Turner job of Crank shaft taking out from DG set carefully, transportation of the same to civil work-shop for repair & complete service and calibration on automatic setting machine and civil work-shop to worksite capcity of DG set 200KVA to 500KVA.

Dismantling of radiator and repair by welding/soldering of radiator and re-fixing the same after cleaning of radiator with soda and acid including replacement of radiator foundation nuts, bolts.

Repair/Replacement of Digital / S96 Voltmeter range 0-500v AC,Ammeter range 300amp with complete panel wiring.

M&Lfor rubbing the uneven as well as open surface of DG set of capacity ranging from 35 KVA to 500 KVA with emery paper, cleaning all the grease and oil substances over the area. applying two coat of synthetic enamelled paint as per existing colour code or as directed.

S&F in replacement battery 12volt 180Ah complete all as specified and directed.

S&F in replacement battery 12volt 150Ah complete all as specified and directed.

S&F in replacement indicator lamp (LED type) fitting with neon lamp in three colour (Red/Green/Yellow) complete all as sppeicfied and directed.

S&F in repalacement Set of Joints of existing type and make.

S&F in repalacement Oil pump assembly 35KVA to 63KVA of existing type and make.

S&F in repalacement Oil pump assembly 200KVA to 500 KVA of existing type and make.

S&F in repalacement Rocker assembly of existing type and make.

S&F of GI strip of size 32mmx6mm with suitable nuts & bolts complete all as specified and directed by the Engr-in-charge.

Dismantling the broken door of sound proof canopy of the DG set ranging from 35 KVA to 500 KVA and taking it to nearest workshop for repair. Repairing the door with new hinges & nut bolts etc and re-assembling the same at existing position & testing for proper opening & closing of the doors, including repair of the locking system, if required.Note: The rate quoted deemed to include the cutting/ drilling/welding work, if any.

Carbon Bush of DG Sets of Capacity 35KVA to 500KVA (Set of three) as per sample all as specified.

S&F Radiator Baco with Fan of existing type and make.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) connected to and including galvanized iron earth strip 32x6 mm dia by means of bolts nuts check nuts and washers of galvanized iron or steel including PCC pit in PCC 1:2:4 type B-1 RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40x40x5mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh light grade protection pipe 40 mm bore upto main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion all as directed. Note: On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge

S&F for replacement Head Gasket suitable for capacity of 35 KVA to 63KVA of existing type and make.

S&F for replacement Head Gasket suitable for capacity of 200 KVA to 500KVA of existing type and make.

S&F in repalacement Oil pressure Sensor of existing type and make.

S&F in repalacement water temperature Sensor of existing type and make.

Opening /Taking out of injector with nozzle of DG Set of any type /make capacity 35KVA to 200KVA disconnection and opening fuel injector assembly, carrying complete overhauling/servicing fuel injection system with including replacement of injector repair kit including calilbration of injector,checking of pressure complete for each injector and re-assembling the same fitted with DG set prperly in origngal loaction checking the alignment making proper fuel connection, testing for smooth operation complete all as directed by Engr-in-Charge.

S&F in repalacement Hooter,12v DC,IOTA/DSS/EQUIV of existing type and make.

M&L for writing SM No. /MES No. /Maker No/Make /Capacity with letter of required siize i.e hight and thickness of letter on machine /plant at site deploying 'sign writer' complete all as specified & directed.

S& F in replacement indicator lamp LED type) fitting with neon lamp in three colour ( Red / Green/ Yellow) complete all as specified and directed.

S& F in replacement of Change over Switch 4pole 415 volt 250Amp with sheet metal enclosure including taking down old unserviceable complete all as specified and directed.

S& F in replacement of Change over Switch 4pole 415 volt 315Amp with sheet metal enclosure including taking down old unserviceable complete all as specified and directed.

S& F in replacement of MCCB 320 Amp 4Pole 25KA taking down old unserviceable complete all as specified and directed.

Shifting of DG Set any capacity any size at one place to othe place by removing all connections of Alternator and panel with help of skilled electrician and labour, pull up the DG Set with the help of crane and fix the DG Set at plinth of RCC with the help of crane and connections of panel and alternator and testing of DG Set

Material and labour in replacement for fixing or passing through pipe laid in trench or fixed to pole / wall or fixed to LT panel board ,11000 volts grade heavy duty able with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape armoured with galvanised steel wire of tape and overall PVC sheathed 120 sqmm 3.5 core with required aluminium cable lugs all as specified and directed.

Material and labour in replacement for fixing or passing through pipe laid in trench or fixed to pole / wall or fixed to LT panel board ,11000 volts grade heavy duty able with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape armoured with galvanised steel wire of tape and overall PVC sheathed 150 sqmm 3.5 core with required aluminium cable lugs all as specified and directed.

Excavation in trenches in soft/ loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth

M&L for removal of excavated materials (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified.

M&L for returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in trenches

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm before and 15 cm after laying of the cable.

Supply and fixing brick covering with width equal to length of brick as mechanical protection to cable using sub class 'B' bricks laid flat size 230x115x75mm complete all as specified and directed by Engineer-in-Charge.

S& F in replacement of MCCB 320 Amp 4Pole 25KA taking down old unserviceable complete all as specified and directed.

Shifting of DG Set any capacity any size at one place to othe place by removing all connections of Alternator and panel with help of skilled electrician and labour, pull up the DG Set with the help of crane and fix the DG Set at plinth of RCC with the help of crane and connections of panel and alternator and testing of DG Set at load after reshifiting all as specified and directed by Engr-in - Charge.

Dismantling and taking out existing unserviceable street light fittings / flood lights/Post top lantern of any type from pole /high mast/ bldgs incl brackets and electric connections complete

Taking down old unserviceable driver for street/flood/post top lantern light fittings etc

Supply,fixing, connecting, testing and commissioning LED Street light fitting 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

Supply,fixing, connecting, testing and commissioning LED street light fittings 70 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

Supply,fixing, connecting, testing and commissioning LED street light fittings 45 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

GI bracket 1.5 mtr long made out of 40mm bore light grade, GI pipe, bend to shape as required complete with two Nos MS clamps fabricated out of MS flat of size 40 x 5 mm, nuts and bolts duly painted with two coats of aluminium paint of superior quality over a coat of red oxide primer, to be fixed on pole/on roof of building including taking down old brackets complete all as specified and directed by the Engineer-in-Charge.

Supply,fixing, connecting, testing and commissioning LED flood light fittings 120 watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.

Supply,fixing, connecting, testing and commissioning energy saving environmental friendly, long life exclusive innovative die-cast aluminium IP-66 LED flood light of 200 Watt 5700K with high power LED as light source source complete all as specified and directed

Supply and fixing street light junction box of suitable size for single phase and neutral incl earth link cable connection outdoor type, weather proof, factory made out of PVC sheet 1.8 mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with two numbers aluminium strips, 100 Amps capacity insulated with insulators, including colour coding strip, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 6 to 30 Amps - 01 No (c) Clamps made out of 40mm x 5mm flat iron duly welded with nuts & bolts complete all as specified and directed including taking down old unserviceable .

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 40 to 60 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed .

Supply and fixing Street light fitting electronic constant current drivers/PCB/electronic gear suitable for 70 to 90 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed .

Supply and fixing Street / flood light fitting electronic constant current drivers/PCB/electronic gear suitable for 120 to 150 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed .

Supply and fixing Street light/flood light electronic constant current drivers/PCB/electronic gear suitable for 200 Watt LED flood light/street light fitting as required at site or as per sample incl taking out old unserviceable all as specified and directed .

PVC insulated, PVC sheathed twin flat core 1100 volts grade, 4 sqmm aluminium conductor from OH conductor or from junction box to street/security light incl taking down old unserviceable cable all as specified and directed.

Supply, Laying, connecting, testing and commissioning armoured XLPE insulated screened PVC bedded, galvanised steel strip or wire, electric power cable (heavy duty) with aluminum stranded conductor 1100 volts grade, cross sectional area 16 sqmm, 2 core, laid in trenches/fixed to poles/drawn through pipe with suitable size cable glands crimping type cable lugs etc inculding taking out old unserviceable underground LT cable from trench/pole/wall complete all as specified and directed by the Engineer-in-Charge.

Supply and fix single automatic street light switch suitable for 3KW load complete with two numbers infrared sensor based NATURE SWITCH for automatic switching of street/ security lights with one number two pole power contractor 40 Amps (Type MU40-2P, Cs90119) with coil voltage 220/240 V and incoming MCBs single pole - 01 No, outgoing MCBs single pole - 01 No of rating 32 Amps & circuit wiring with single core multi standard of size 10 sq mm lighting switch operation should be based on natural light lux level, Required luminance level for switching ON is < 30 Lux. The sensor (one service and one stand by) should also have part night operation facility for 4,5,6---11&12 hours. The sensor along with suitable power contractor (S), incoming and outgoing MCBs should be enclosed in a pole/wall mountable enclosure made of Rust proof, Electric shock proof, termite proof and FR grade confirming to IP66 complete all as specified and directed by Engineer in charge.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in soft/loose soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Taking down old unserviceable 40mm dia light grade pipe

Deduct Schedule of Credit of Rs. (-) 104806 .00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

K S BUILDERS (BID ID -3511588)

TARA ENTERPRISES (BID ID -3509477)

DAVINDER SINGH (BID ID -3511907)