Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.4 L+₹2,387.16 (0.10%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹24.8 L+₹44,756.11 (1.83%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹25.6 L+₹1.2 L (4.87%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹27.1 L
EMD Value
₹54,200
Closing Date
1 Aug 2023, 6:00 pmClosed
GARRISON ENGINEER
Garrison Engineer Maint Inf School Mhow453441
PROVN OF ELECTRICITY AND WATER SUPPLY AT FIRING PT AT IB HILL AND BERICHHA CONTROL POST AT INF SCHOOL AND SPECIAL REPAIR AND OF BER CEILING EXHAUST FANS UNDER GE MIS MHOW
2023_MES_607809_1
8579/GE (MIS) / Mhow
Open Tender
Civil Works
Item Rate
150 days
GE (MIS) Mhow
All as per Tender document
8 documents required · 8 mandatory
₹500
Garrison Engineer (MIS) Mhow
₹54,200
Yes
26 Aug 2023
4 Jul 2023
3 Aug 2023
4 Jul 2023
1 Aug 2023
18 Jul 2023
Amount
Excavation in trenches not exceeding 1.5m depth for laying cables GI pipe line etc and getting out in hand/dense soil complete.
Returning, filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified.
M&L for 'Medium grade' galvanised iron tubes with all fittings and fixed complete on walls and ceilings or laid on floors of 40 mm bore.
M&L for 'Medium grade' galvanised iron tubes with all fittings and fixed complete on walls and ceilings or laid on floors of 25 mm bore.
S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed suitable for 25mm bore dia of pipe ( Minimum weight 455 gms).
Supply and spread river sand for cable cushioning in trenches all as specified in clause 19.75 of SSR Part-II Note:- Thickness shall be measured after punning.
Supply and laying un-reinforced precast concrete cable cover, class LV, type I flat of size 250 mm x 150 mm x 40 mm laid in trenches for cable protection all as specified.
S&F LT Cable jointing kit for 1100 V (Earthed) grade cable for straight through heat shrinkable type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 4 core 25 sqmm
M&L for LT under ground cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100Volts grade laid in trenches / passing through pipes of size 4 core 25 sqmm
M&L for LT under ground cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100Volts grade laid in trenches / passing through pipes of size 2 core 4 sqmm
M&L for lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings
M & L for Plastic hanging electrical bed switch on/off button
S&F MCB DB made of sheet metal enclosure, powder coated with bus bar, neutral link, earth bar and din rail of SPN 2 way, 240 Volts single door fixed in wall including making good disturbed surfaces. Make : Havells/Standard/Legrand
S&F MCB DB made of sheet metal enclosure, powder coated with bus bar, neutral link, earth bar and din rail of TPN 4 way, 415 Volts double door fixed in wall including making good disturbed surfaces. Make : Havells/Standard/Legrand
S&F 415 V, 10 kA, 'C' curve MCB TPN 40-100 Amps in the DB complete with connection and testing and commissioning
S&F 240 volt, 10 kA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning .
S & F new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and top opening separate driver compartment with toughened glass having IP 66 protection and impact resistance of IK07 of capacity 90 Watt, powder coated grey finish including control gear (Inbuilt electronic driver with APFC, Lower THD Output short circuit protection, surge voltage protection, over voltage protection& other reliability test as per IS 15885 Part-2/Sec 13 (Model -ENDURAOMNI PLUS OF MAKE: HAVELLS) or other equivalent as approved by GE
S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length of down rods, with compitable electric regulator and accessories , 230 V, 50 Hz, 1200 mm sweep, Minimum air delivery 210 CFM with service value greater than 8.00 BEE Five star rated, including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. Make : Bajaj Model No : ENERGOS 28 or other equivalent make of Havells/ Orient as approved by GE.
S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length of down rods, with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Minimum air delivery 210 CFM with service value greater than 8.00 BEE, Five star rated, including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. Make : Bajaj Model No : ENERGOS 26 or other equivalent make of Havells/ Orient as approved by GE.
S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length of down rods, with remote control and accessories , 230 V, 50 Hz, 1400 mm sweep, Minimum air delivery 210 CFM with service value greater than 8.00 BEE, Five star rated including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. Make : Havells Cat part No : FHCNF5S WHT56 or other equivalent make of Bajaj/ Orient as approved by GE
S&F exhaust fan 450 mm sweep, AC single phase 230 Volts complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed surface of wall and finishing with the existing surface of wall as per existing complete all as specified and directed Make : Havells Cat Part No : FHEHDSPGRY18 or other equivalent make of Bajaj/ Orient as approved by GE
Vinayak Trading House
MODI CORPORATION
Choudhary Traders and Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .