REHABILITATION OF DISTRESS CONCRETE MEMBERS, STRUCTURE REHABILITATION AND REPAIRS TO JOINARY FLOORING SANITARY FITTINGS AT INS HAMLA UNDER GE(NW) BHANDUP

Amount

Taking down cement mortar or lime plaster of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed

M&L 10mm thick ready mix plaster , on fair faces of brick work or concrete surfacesl; finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed

M/L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat oil bound distemper with roller complete all as specified and directed.

M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed.

M & L white cement based Wall care putty not less than 1mm thick on wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L 5 mm thick ready mix plaster over concrete surfaces of ceiling surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed

M & L for 20 mm (15+5mm) thick ready mix plaster using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified and directed. Note : Water proofing compound shall be measured & paid seperately.

M&L for for preparation of new plastered surfaces of walls, chajjas, slab projections and applying two coats of 100% Anti fungal acrylic emulsion paint in approved shade over a coat of primer and including necessary scaffolding complete all as specified and as directed.

M&L for preparation of old surfaces of walls/slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including washing down,with water and applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc,complete all as specified and as directed.

M & L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by washing down, brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss effloresence salts and trading oil and greasy spots complete removal and applying one coat of cement base paint complete all as specified and directed .

M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.

M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint completed as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles completed as specified and directed.

M&L Brick work with sub class 'B' old size bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.

Removing loose concrete carefully by low impact hammer bracker or manually by chisel and hammer machanisuem including necessary scaffolding and removal of debris out of MD land Complete all as specified and directed. REHABILITATION WORK ITEMS 19 TO 26 Note : 1. Rehabilitation works is to be carried out by the authorised rep / applicator of the manufacturer and will render certificate at the stages to the effect that work / methodology has been executed / adoped as per the prescribed norms. 2. The rate for rehabilitation works includes necessary scaffolding, form work, steel props, and safety works like barricade, safety net, dust net etc as per site requirement.

M&L for carrying out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of propertyh which permits the material to migrate to a virtual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attach anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete completed as specified and directed.

M&L for applying of anti Corrosive primer for exposive steel reinforcement complete all as specified and directed. Make : IP Net RB of Krishna Conchem or equivalent.

M&L M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar upto 20mm thickness including levelling, profiling etc complete all as specified and directed. Make : Molith PMM of Krishna conchem or equivalent. Note :- Mode of measurement : Superficial area of concrete will be measured.

M&L for building up the profile of structural members using polymer modified mortar upto 40mm thickness including levelling, profiling etc complete all as specified and directed. Make : Molith PMM of Krishna conchem or equivalent. Note :- Mode of measurement : Superficial area of concrete will be measured.

M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem (Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately).

M&L for providing mild steel TMT bars in 10mm & over various structural RCC elements like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with binding wires etc. complete all as specified and directed. Note: (1) Including Anchoring of reinforcement bars . (2) This item is applicable for new RCC and also for additional bars requied in the existing RCC structures in repairs.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F 160mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to walls etc complete all as specifed and directed.

S&F 75mm bore PVC soil waste pipe pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc including taking down of any type complete all as specifed and directed.

S&F 160mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

S&F 110mm dia PVC bend any radius with or with out access doors etc, completed as specified and directed.

S & F 110 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door completed as specified and directed.

S & F 75 mm bore PVC (SWR) Branch piece, single (single Y) equal or unequal of any radius with access door completed as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl completed as specified and directed.

S & F for Bands, straps, supports, hold fasts or stays for wooden post, two or three way and securing complete conforming to Fe-290 Gde E-165 complete all as specified and directed.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

Taking down door / window shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

Supply & fixing in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L connector PVC 450mm long complete all as specified and directed.

Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises completed as specified and directed.

M&L PCC 30mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed.

M&L non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface 350x250x7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick light shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per item no.47 above but 20mm bore of pipe complete all as specified and directed..

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia completed as specified and directed.

All as per item no.49 above but 20mm bore dia complete all as specified and directed.

S&F PVC cabinet mirror in repairs of size 600X450 mm complete all as specfied and directed. Make: poly tuf or Prayag polymers pvt ltd.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .

M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of Reincorced concrete in chajjas and similar suspended, slab facia drop etc work complete all as specified and directed.

Flush cutting of Rcc chajjas, fins with reinforcement up to 150 mm depth by norms of Rcc mechanical cutting machine completed as specified and directed.

S&F premoulded FRP Chajjas with 2 to 2.5 mm FRP thickness on both sides with manglore clay type finished with 150 mm drop on front, sides and 60 mm collar on back side including necessary fixtures complete all as directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each completed as specified and directed.

S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick and fixed in repairs complete all as specified and directed.

Supply only sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Taking down Chowkhats or frames (with out taking off shutter from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F MS flot iron as in hold fast and similar work as specified Gde Fe 290 Gde E-165 completed as specified and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L Plain framed,35 mm thick panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats completed as specified and directed.

S&F stainless steel butt hinges 100mm size completed as specified and directed.

S&F 150mm length extruded aluminium alloy handles,fabricated type, anodised completed as specified and directed.

S&F150 mm length aluminium anodised barrel tower bolt of extruded section completed as specified and directed.

M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed..

S&F 300 mm Push spring type stainless steel floor door stopper complete all as specified and directed.

M&L for preparation of new wood and wood based surfaes any description, not otherwise described over 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces complete all as specified and directed.

Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.

Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only 15 mm bore pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

All as per item above but angle cock Chromium plated 15mm bore dia complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

S&F health faucet (Hand wash for EWC) first quality including CP bracket to hold the faucet with CP pipe of suitable length in wall all as per manufacture instructions and as directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 1000 ltrs capacity complete all as specified and directed..

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed..

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed

M&L for post constn, antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete as specified and directed.

M&L for providing and injecting chemical chloropyrphos emulsion conforming to IS-3244(with 20% EC) for post construction antitermite treatment along external wall below concrete or masonry apron @ 2.25 litre per running meter including drilling and plugging note complete all as specified and directed.

M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.5 ltr/hole by drilling 6mm dia hole at a downward angle of 45 degree at 150 mm centre to cetre and sealing the same complete all as specified and directed.

S&F for Tubular towel rail / curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.

S&F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed.

Resecuring or easing, greasing & adjusting without taking down door shutter or rolling shutter of nay description exc 2.00 Sqm each including replacement of unserviceable lever, lock, handle, covering etc as required for smooth operation complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 29270.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

mp construction co

GAJANAN SALES CORPORATION

Vishal Builders

industrial suppliers

M/s Mukesh Engineers

Jay Jyotirling construction co.