PROVN OF MISC B/R WORKS SERVICES AT AF STATION SONEGAON ,NAGPUR

Amount

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.

Removing excavated soil exceeding 1.5Km and not exceeding 5Km and depositing where directed complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed.

M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.

M&L for PCC 1:2:4, type B2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed.

M & L for brickwork with flyash bricks using old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate ase in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for precast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:4) including necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., and mass concrete complete all as specified and directed.

M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of formwork to foundations, fillings, bases of columns, rafts & raft beams, sides & soffits of foundation & plinth beams and similar works; vertical or batter for rough finished surface of concrete complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete square, rectangular or polygonal complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.

S&F rolled mild steel framed work as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe- 410 E-250 Quality ''B'' complete all as specified and directed.

S&F rolled mild steel framed work as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W Gde-E-165 complete all as specified and directed.

M&L for Fe 410-W (Gde-E- 250) quality-A Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.

S&f pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

M& L for exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid laid on aluminium anodised framework fixed to ceiling complete all as specified and as directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 200mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and as directed.

S&F 100mm size butt hinges mild steel medium weight cold rolled complete all as specified and as directed.

S&F in extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge.

M & L for Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to aluminium frame work complete all as specified and directed.

Supply and fixing Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.and as directed.

M&L for 100mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.

M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors laid over 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed Ceramic colour tiles 350X450X 7 to 8 mm thick on vertical surfaces such as skirting/dados including back coat of plaster in CM 1:3 10mm thick complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately.

M&L rendering 15mm thick in cement mortar (1:6) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces all as specified and as directed.

M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Supply only integral water proofing compound

M &L for preparation new steel and iron surfaces not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of primer of red oxide complete all as specified and as directed.

S&F sheet glass 3mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 100mm dia pipe including packing under and completely surrounding the pipes with concrete after they are laid and tested complete all as specified and as directed.

S & F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes for union & fixed of size 20 mm bore complete all as specified and directed.

S & F stop valves fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes for union & fixed of size 15 mm bore complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

Supply and laying of 15mm bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.

Supply and laying of 20mm bore GI tubing medium grade with all fittings including cutting for branch line & making threads complete fixed to wall/flooring /ceiling etc or laid in trenches all as specified.

S&F Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, complete all as specified and as directed.

S&F 15mm bore Pillar taps, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F 110mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls or laid in trenches including PVC clamps etc. complete all as specified and directed.

S&F 75mm dia UPVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed on walls etc. complete all as specified and directed.

S&F UPVC (SWR) bend any radius suitable for 110mm dia pipes complete all as specified and directed.

S&F UPVC (SWR) bend any radius suitable for 75mm dia pipes complete all as specified and directed.

S&F UPVC (SWR) junction single (single T) equal or unequal suitable for 110mm dia pipes complete all as specified and directed.

S&F 75mm dia oulet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 110mm dia oulet PVC (SWR) P trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F Vitreous China urinals, (half stall urinal) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F vitreous china wash basin of size 600mm x 450mm including waste, chain & plug and porcelain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or erecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waste pipe fitted complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern with 'P' or 'S' trap , white with including white coloured PVC seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including connections to drain (or outgoing pipe) and flush pipe etc. complete all as specified and directed.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.

S & F 10 ltrs capacity PVC valveless, syphonic action type,flushing cistern,low level,white,with inlet ,ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern complete all as specified and as directed.

S&F PTMT shelf fixed with and including chromium plated brass screws and plastic cleats (minimum weight 300g) complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S & F Aluminium anodised ,Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair Health faucet (ABS Body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

SS & F Rotational moulded polyethyne water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position all as specified with capacity 1000ltr including 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L for concealed point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light/ fan point controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix switch socket combination 5 in 1, 6/16 Amps, flush type, 230 volts all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal all as specified and directed.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for 5 Pin 15 Amp switch socket combination on Independent board complete all as specified and directed.

Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately.

Material and labour for submain wiring complete with two runs of 6.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through existing conduit fixed on walls/ floors/ ceilings etc. alongwith one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note : Two runs of 6.0sqmm multistranded cable and one run of 6.0sqmm cable as earth continuity conductor shall be considered as one unit length.

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete wired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed. Make CGCta No-CCS-100-20-65-HL2-DP-NWH/Havells/philips/Bajaj.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing MCB single pole and neutral (MCB SPN), 32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6-32Amps, 240 volts of rupturing capacity 10kA, B curve type complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S & F Exhaust fan, steel body, AC single phase 230V of size 300 mm sweep with blades, frame and louvers complete all as specified & directed.

karambir constructions (BID ID -3124832)

Rajapriyaconstruction (BID ID -3125327)