Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST TENDERER. | |
| 2 | L2₹11.9 L+₹44,969 (3.92%)Rejected-AOC MAAN SAROVAR 96 SAI NAGAR GODHANI ROAD NAGPUR 440030 | NAGPUR | NAGPUR | MAHARASHTRA | 440030 | L2 | Rejected-AOC NOT LOWEST TENDERER. | |
| 3 | L3₹13.3 L+₹1.8 L (16.1%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST TENDERER. |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR, MAINTENANCE OF WATER SUPPLY INSTALLATIONS INLUDING B/R WORKS AT VAYUSENA NAGAR, NAGPUR.
2022_MES_557931_2
GE/NAG/22-23/8568/40
Open Tender
Civil Works
Item Rate
180 days
GE AF NAGPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹30,000
3 Mar 2023
28 Nov 2022
26 Dec 2022
28 Nov 2022
19 Dec 2022
5 Dec 2022
Amount
Demolition of brick work or stone masonry built in cement mortar incl all quoins arches pillars etc. Complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) Complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified as specified and directed
Demolition of cement concrete (unreiforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete ground floor and paving n.exc 15cm thick below or above ground level complete all as specified and directed.
M&L for cement concrete 100 mm thick , type D-2, (1:4:8) (using 40mm graded crushed stone aggregate), as in below the paver block, tiles footpath complete all as specified and directed.
M&L for 100 mm thick cement concrete, type B- 1, (1:2:4) (using 20 mm graded crushed stone aggregate), as in path, hard standing complete all as specified and directed.
M&L for cement concrete type C-2 (1:3:6) 75 mm thick as in plinth protection surface finished even and smooth surfaces without using extra cement complete all as specified and as directed.
S&F chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in cement slurry in floors with cement pigment including and over 15mm thick screed bed or bedding layer of CM 1:6 set and jointed in neat cement slurry and pointed in grey cement or colored pigment to match the surface of tiles finish complete all as specified.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand edding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including taking out old concrete paver blocks, sand cushioning and remove from side, complete all as specified and as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. Over 15 mm thick screed bed in CM 1:6, including set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick including set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening and necessary excavation wherever required complete all as specified and directed. Note:- size and shape of kerb stone shall be approved by GE before execution
Taking down cement or cement lime plaster of any description from brick or stone wall etc including racking out of joints , hacking for key any scrubing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) surface finished fair and even complete all as specified and directed.
M&L for rendering 10 mm thick on fair face of brick work or concrete surface in CM 1:6 , finishing surface fair and even complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of new plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.
M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall all as specified and directed.
M&L for preparation of old decorated plastered wall surface applying two coats of oil bound distemper on wall all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old treated wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and as directed.
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.
Taking down shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats wrought rounded or chamfered put together with glue pinned at joints and fixed or fixed in parts thereof complete all as specified and directed.
S&F 30 mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube including taking down existing PVC door frame with shutter complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
M&L for Anodised aluminium frame with powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (due to existing available on site).
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified With Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed by Engr-in-Charge. (Glazing shall be measured and paid separatly). (due to existing available on site)
M&L for Anodised aluminium window and ventilator shutters, fixed type / sliding type, Two/three track without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified With Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed by Engr-in-Charge. (due to existing available on site).
S&F Aluminium alloy, anodised, sliding door bolt with hasp 250mm long, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F butt hinges 100mm long medium weight cold rolled miled steel and fixed complete all as specified and directed.
S&F Mild steel sliding door bolts, 250 mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed sections complete all as specified and directed.
S&F in anodised aluminium barrel tower bolt 200 mm long complete all as specified and directed.
S&F in anodised aluminium barrel tower bolt 100 mm long complete all as specified and directed.
S&F 150 mm long aluminium handle cast type complete all as specified and directed.
S&F 100 mm long aluminium handle cast type complete all as specified and directed
S & F floor door stopper 140mm long of aluminiumm alloy body and tongue, anodised, with hard drawn steel spring,mfixed in floor complete all as specified and as directed.
Supply and fixed in repair mild steel 300 mm ordinary rat tail rod pattern spring including roller and roller plate in wooden/mild steel chokhat complete all as specified and directed.
S & F mild Steel ventilator of top hung shutter including 12mm size MS guard bars, projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded including cutting holes in wall for inserting holdfast and making good to the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete incl taking down existing of any description complete all as specified and directed.
S&F in repair 0.36 mm dia stainless steel wire gauge and average width of apreture 1.4 mm with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass (any thcikness size, quality or descritpion) from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality in square nexc 0.50sqm each pane glazed with oil putty or fixed with wooden beads complete all as specified and directed.
Dismantling of corrugated AC/fibre/GI sheet any pattern in roof incl ridge complete all as specified and directed
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Dismantling structural steel work in cluding doors, gates but excluding framed truss etc. Complete all as specified and as directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W(Gde E-250) quality B complete all as specified and directed.
ML for preparation of new or previously unpainted steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.
Manufacturing, supplying and fixing retro reflective Overhead informatory boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM D-4956-01 as approved by engineer-in-charge, letters, borders etc. as directed by Engr-in-Charge or as in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure onforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft mresistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
Maintenance of rolling shutters of any size upto 5.5 m wide with easioning, greasing, necessary welding to make the shutters full functional and easy operational including minor spares and materials costing upto Rs. 200/- as required and painting with synthetic enamal paint all as specified and as directed. Note Safety lever lock/ ball bearing and other major spares if required will be replaced and paid separately.
M&L for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
M&L for Ball bearing for rolling shutters and fixed at place complete all as specified and directed.
M&L for application of one coat of exterior emulsion paint of white or AF blue colour or equivalent colour as approved as GE, using ultra clean paint or Dulax ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces, edges of slab, roof/chajja projection ana column etc. including filling the holes and broken surfaces with waterproof putty up to height 7.00 mtr, after necessary preparation all as specified and as directed.
M &L for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and finishing the surface apply epoxy base resin of manufacturer pidicrete and choksey and make good with concrete 1:1.5:3 as required to existing broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600mm depth and 100 mm thickness including necessary scaffolding as required at site etc complete all as specified and directed.
M & L for dampness rectification on Wall Area :- Surface Preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level complete all as specified and directed. Coating: Applying two coats of Dr Fixit Pidifin 2k/Equivalent (a two component, anti-fungal, acrylic waterproofing coating) over cleaned surface with brush and allowing it to dry for 24 hours Finishing the surface: Applying plaster 15 mm thick in CM 1:4 over the treated surface with waterproofing compound to provide proper finish proper curing of plastered surfaces, preparation of plastered surfaces and appling 2 coat of cement base paint over a coat of primer complete all as specified and directed.
M/s Prakash R. Verma
M/s Rahul Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .