Repair Work of Registrar (Civil Court ) Quarter at Hazaribag

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separatelyPowder coated aluminium (minimum thickness of powder coating 50 micron

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron

Providing and fixing 12 mm thick prelaminated particle board flat pressed Pre-laminated particle board with decorative lamination on both sides three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and fixing glazing in aluminium door, window, ventilator shutters With float glass panes of 4 mm thickness (weight not less than 12.50 kg/sqm and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing plaster of peris false celing of 10mm thick celing tiles do--- do all com job.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing and applying 1mm thick cement based putty do ---do all com job.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.

providing ply wood partion up to 2.5 m hight with 4mm thick commerical ply wood of standerd make fitted and fix both sides over sal wood frame of 50x50mm horiz members including cost of anchoring the partitior to floors and wall properly and provinding 2 coats of senthetic enamel paint over a coat of priming of approved shade and make and leaving space for doors if necessary all complete as per drawing specification and direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative double leaf flush shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 9.127.1 1.5 mm thick

Providing and fixing aluminium extruded section body tubular type universal huydraulic door closer (having brand log with ISI, IS:3564) embossed on the bodyu, door weight upto 36kg. To 80 kg. and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc. complete

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. complete

Wiring for light point/fan point / exhaust fan point / call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/ recessed PVC conduit with modular switch modular plate suitable GI box etc. as required Group B

Suplying and fixing of following size PVC counduit along with accessories in surface all com job.20 mm

Wiring for Circuit /submain along with earth wire with following size all com job. 2x1.5+1x1.5sq.mm

2x2.5 sq.mm+1x2.5 sq .mm

Suplying and fixing of following Modular type switch/socket in surface all com job.5/6 amps one way switch

Suplying and fixing 2 pin 5 amps ceiling rose on existing junction all com job.for exhaust fan

Suplying and fixing 2 pin 5 amps ceiling rose on existing junction all com job.9" exhaust fan

ITC exhaust fan upto 450 mm sweep

18/20W LED Square down light

S.I.T.C of 1'x1' LED Panel light

S.I.T.C of 2'x2' LED Panel light

Add GST 18 %

Add L.Cess 1 %

RAKESH KUMAR CHOUDHARY