SPECIAL REPAIR TO BLDG NO E-77 POST OFFICE ROAD AND PROVN OF PARKING AND VERANDAH SHEDS AND ALLIED WORKS AT SM-263/D, 278/A, 259/A, 275/C, 274/C, 269/C, 274/B, 269/D, 276/C, UNDER GE (MCTE) MHOW

Amount

B/R WORK

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris and rubbish off the premises and stacking serviceable tiles.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specified and directed.

Dismantling water tanks of capacity 1000 Ltrs complete all as specified.

Dismantling water tanks of capacity 500 Ltrs complete all as specified.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Dismantling timber scantlings unfarmed of any section, in any position complete all as specified.

Dismantling boarding, any description, fixed in any position with screws

M&L for cement concrete 25mm thick type B-1, 1:2:4 (12.5mm graded aggregate) as in flooring etc complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick in Plain cement concrete type C2 (1:3:6) (using 40mm graded aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surface of walls and finished the surfaces even & fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note : Water Proofing compound shall be measured and paid for separately)

M&L for 5mm thick rendering on ceiling surfaces in cement mortar 1:3, finished fair and even without using extra cement complete all as specified.

Complete removal of existing treatment of any description, including preparation of surfaces, on wall surfaces of any description complete all as specified.

M&L for applying wall care putty 1 to 2mm thick, in two layers on wall surfaces & smoothening the surfaces with sand papers etc., (preparatory to OBD/ plastic emulsion/ interior/ exterior emulsion paint as directed) complete all as specified.

M&L for preparation of new surfaces of wall and applying acrylic distempering in two coats over a coat of alkali resistance priming paint, 1st quality acrylic distemper (ready mixed) of approved manufacturer, required shade and colour, complete as per manufacturer's specification. Note :- (a) Primint coat and distempering work to carrqied out through air less spray machine (mechanical means).

M&L for two coats of 100% premium acrylic emulsion paint, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces. Note :- (a) Contractor shall furnished gurantee of four years against services rendered, (b) Primint coat and painting work to carrqied out through air less spray machine (mechanical means).

M&L for two coats of 100% premium acrylic emulsion paint, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over old surface including preparation of surfaces. Note :- (a) Contractor shall furnished gurantee of four years against services rendered. (b) Painting work to carried out through air less spray machine (mechanical means).

M&L for preparation of new surfaces of ceiling and applying acrylic distempering in two coats over a coat of alkali resistance priming paint, 1st quality acrylic distemper (ready mixed) of approved manufacturer, required shade and colour, complete as per manufacturer's specification. (a) Primint coat and distempering work to carrqied out through air less spray machine (mechanical means).

M&L for preparation of old surfaces of ceiling and applying acrylic distempering in two coats, 1st quality acrylic distemper (ready mixed), of approved manufacturer, required shade and colour, complete as per manufacturer's specification. (a) Distempering work to carrqied out through air less spray machine (mechanical means).

S&F bathroom mirror cabinet plastic body white coloured, wall mounted of size 47.40 x 37.60 x 19.20 cm, minimum wt 3.20 Kg, rectangular shaped complete all specified.

S&F suspended false ceiling using anodized GI exposed ceiling suspension system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end, 20mm on other and fixed to wall with the held of nylon sleeves incl providing & fixing Gypsum board of 12mm thick in ceiling fixed with screws and GI frame and finished surfaces and finishing surface attachment and finally board have tube jointed and finished look with POP to have a flush look using jointed compound/ tape painting etc all as specified and directed.

S&F for POP decorative boarder of approved design complete etc all as specified and directed.

M&L for Glazed ceramic coloured tiles 300 x 600 x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/ skirting in vertical surface complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for Vitrified Ceramic tiles 9 to 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge

All as per item No.32 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6) using 12.5mm graded aggregate etc complete all as specified as directed

All as per item No.34 above but steel frames of size 125 x 60mm, complete all as specified as directed

S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), all as specified and directed by Engr-in-Charge.

S&F Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, all as specified .

S&F aluminium alloy butt hinges 100mm long with galvanised mild steel hinge pin type C 21.

S&F for small fittings of 2nd class hard wood, such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cm each.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, complete all as specified.

M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper part shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc. shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x 1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4mm thick glass superior quality. (v) IDPE Rubber gasket for fixing of glass. (vi) Locking cleats per shutter - 01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters - 01 Nos. (ix) fixing screw for frame with wall per windows - 08 Nos.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Fixing only 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

Fixing only 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

S&F PVC 1000 litre capacity, triple layered polyethylene water storage tanks with threaded lead (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, complete all as specified.

S&F PVC 500 litre capacity, triple layered polyethylene water storage tanks with threaded lead (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, complete all as specified.

S & F in repair vitreous china water closet Rimless One piece EWC with slim soft close seat cover 660 x 350 x 745mm Concealed S or P Trap for better aesthetics Snow White - Whiter than the whitest complete all as specified & directed by Engr-in-charge. Make : Cera CAT Part No S1013230 or equivalent.

S&F in repairs table top basin, of size 515 x 415 x 145mm fixed complete incl CP waste coupling, waste pipe, PVC connection for hot & cold all as specified and directed. Make : Cera CAT Part No S2020171 or equivalent

S & F in repair bib taps fancy type, brass, chromium plated with crutch or butterfly handle, screwed down, screwed for 15mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle sewed both ends for iron pipe or for unions.

S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle sewed both ends for iron pipe or for unions.

S&F in repairs Health Faucet ABS with Rabbit Cleaning System, 1.25 m Long CP Flexible Tube & ABS Wall Hook.

S&F in repair toilet paper holder chromium plated complete all as specified and as directed. Make Cera Cat part No F5003109 or equivalent.

S&F in repairs soap dish glass, complete all as specified and directed. Make cera Cat Part No F5003116 or equivalent.

S&F 15mm bore brass CP Wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe complete all as specified and directed. Make : Cera Cat Part No F2002403 or equivalent.

S&F in repairs Overhead shower 125 x 125mm (5" x 5") with 200mm (8") long shower arm and wall flange complete all as specified and as directed, Make Cera Cat Part No F7020111AB or equivalent.

S & F in repairs Hand shower 1.5 m CP Flexible SS Tube, 5 flow Hand Shower, adjustable wall hook, rabbit cleaning system all as specified and directed.

S&F in repair chromium plated Central hole basin mixer with 450mm braided connection pipe (without pop-up) screwed down for 15mm GI bore pipe complete all as specified and directed. Make : Cera Cat Part No F2002461 or equivalent.

S&F in repair 20mm dia brass chromium plated tubular towel raised type, 60cm long between flanges, complete all as specified.

S & F in repairs Flexible waste pipe for wash hand basin fettled to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge.

S & F in repairs 32/40mm PVC downpipe for kitchen sink fitted to Kitchen Sink incl all necessary brackets etc all as specified and directed by Engr-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/ 40mm-60 gms)complete all as specified.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm widow with chromium plated bracket guard and railing 60 cm long

S&F in repair Nipple 20mm dia suitable for HDPE water tank. (Minimum weight 20mm - 45gms)

S&F in repair Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20mm bore and fixed in repairs, all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms)

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F PVC (SWR) bends suitable for 75mm external dia complete all as specified

S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/ clips complete all as specified.

S&F PVC (SWR) bends suitable for 110mm external dia complete all as specified

S&F PVC (SWR) pipes, 110mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/ clips complete all as specified.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4)

Supply only integral water proofing compound. Makes : Pidilite Industries/ Impermo/ Snowcem India Ltd/ Sika

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified

S&F, in repair mild steel helical door spring 300mm long stove enameled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F decorative curtain rod 25 dia with decorative head on both end of rod and necessary clamps/ fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repairs 50 x 15mm size magnet door catcher for closing for Cupboard door shutter complete all as specified and directed.

M&L for PCC type B0 (1:2:4) using 12.5mm graded stone aggt in filling of holdfast and steel door frames etc complete all as specified.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc.

S& F 100mm size MS mat/ glossy finish handle complete all as specified and directed.

S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed.

S&F modular type stainless steel basket size 20 x 19 x 8 inches 9 dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

All as per item No.94 above but basket size 20 x 19 x 6 inches complete all as specified and directed.

S&F modular type stainless steel Perforated Sheet Cutlery Basket size 20 x 19 x 4 inches 9 dia of wire not less than 3.00mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed.

M&L for taking down/ dismantling of existing roof treatment of any description such as old APP membrane roof treatment etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete all as specified & directed and remove the same from site.

M & L for Brushing with neat cement slurry @ 3 Kg per Sqm area mixed with integral water proofing compound as specified and directed (WPC shall be measured and paid separately under respective item).

M & L for rendering 15mm thick in cement mortar 1:4 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item).

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid separately.)

M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/ sqm and reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and directed. Note: Application of APP membrane must be done by authorized applicator of membrane manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg/ sqm each coat on water proofing treatment with preparation of surface as on non assessable area complete all as specified and directed.

S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description

S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, 150GSM as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Charge. Note : The Preprinted galvalume aluminium zinc GI based profile pattern steel sheet should be TATA Blue Scope Colourbond XRW or Equivalent.

S & F Pre-painted galvalume aluminium zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, 150GSM as in ridge covering/ cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-Charge.

S&F MS framed brackets of angles or tees with web and flanges cut to shape, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., including bending and welding, conforming to Fe-290Gde-E-165

S&F MS framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding as in purloins, rafters, etc. conforming to Fe-290Gde-E-165

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in hard/ dense soil

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in foundations, fillings and mass concrete, etc complete all as specified and directed.

S & F powder coated aluminium ventilator cross section conforming to IS 63.5 x 38.10 x 1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

Dismantling of AC corrugated or semi corrugated sheeting of any description or position complete.

E/M WORK

Taking down copper/ aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and refixing the same with cairfully after compltion of B&R Work complete all as specified and as directed.

Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and efixing the same cairfully after compltion of B&R Work complete all as specified and as directed.

Taking down old/ unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One light point controlled by two, two way switch 5 Amps

(c) One Fan point/ Exhaust point controlled by one, one way switch 5 Amps and regulator

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the SAME BOARD.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

All as per item No.120 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

All as per item No.120 here in before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 4.0 sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 Sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 Sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed. Make : Bajaj, Havells, HPL

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 01 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells Cat Part No LHEXBLP7PN1W020, Wipro Cat Part No LL20-281-XXX065-ALI or its equivalent in Philips, Bajaj approved by GE.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat Part No. LHDLO6160099 or its equivalent in Philips, Bajaj approved by GE.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make : Bajaj Cat Part No BCLSB 10 NW or its equivalent model in Wipro, Philips approved by GE.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 01 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make : Bajaj Cat Part No. BIBWP 10W LED or its equivalent in Philips, Wipro approved by GE.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge. Make : Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro approved by GE.

S & F for LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, AC surface/Recessed WW type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer-in-charge. Make Crompton Greaves Cat Part No LCTLRNE-36-FO-CDL its equivalent in Philips, Wipro, Havells approved by GE.

S & F for LED down light luminaire Round surface/ Recessed mounted LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100 lm/w round shape 12 watts, white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz, recessed/ surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. Make : Crompton Greaves LCDSPLN-R-12-NW equvialent in Philips, Wipro, Havells approved by GE.

S & F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make : Bajaj Cat Part No BGBOS 600 9W LED, Philips Cat Part No BCP 150 LED 150 WW or its equavalent in Wipro.

S & F for LED post top lantern 30 watt light fitting made of fully cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection with polyurethane paint with acrylic window cover, provided B22 brass holder with aluminium cover complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed. Make : Mepro Cat Part No PTL-0002 or its equivalent in Bajaj, Philips, Wipro approved by GE.

Supply and Fix in repairs flush mounting factory made Vertical FP MCCB DB, IP-42 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 Amps MCCB as incomer and SP/SPN MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge.

S & F for sheet metal enclosure MCB, DB, SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F (in replacement) MCCB 4 pole, 415 volts, in the V TPN and connection with using aluminum lugs complete all as specified and directed for 150 Amps rating, 25 KA breaking capacity complete

S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed.

S & F for Modular type TV Socket out let complete all as specified and as directed.

S & F for Modular typeTelephone socket outlet complete all as specified and direced.

S & F for ceiling fan, 230 Volts, 50Hz, 1200mm sweep with down road, canopy, blades, BLDC with remote contrrol motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed.

M&L for wall fans 450mm sweep, 230 volts, 50 Hz complete with mounting brackets all as specified and directed.

S & F for energy efficient exhaust fan of 230/300mm sweep made of metal body Ventil Air-DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted.

Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250/200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. Make : Havells Model Ventil Air-DX White or equivalent in Crompton/ Almonard

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

S & F for Decorative wall mounted luminaire made out of Cast Aluminum body finished with Polyurethane Paint (With Prior Treatments) with acrylic window cover. B22 Brass holder provided with aluminum cover. As per : IS 10322 PART-5 SECTION-1 LATEST 2017 suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make : Mepro Cat Part No. WBL-07or its equivalent in Philips, Bajaj, Havells approved by GE.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply and laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sqmm

Supply and fix 3 Phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH and fixing with rectangular wooden box. complete all as specified and as directed.

Jamna Constructions

M/s. Shubh constructions

M/s Shree Ganesh Traders

SATHI ENTERPRISES

M/S UnitedConstruction

sunway associates

M/S DADISA CONSTRUCTION

JYOTI ENTERPRISES