Repair to roof treatment, comprehensive repair to kitchen, bathroom, toilet and other misc works at Beas Mil Stn under GE Kapurthala.

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on any of brick work or concrete surfaces of walls finished fair, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on any of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over one coat of birla putty 1mm thick preparatory to distempering, complete all as specified and directed by Engr-in-Charge.`

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of birla putty 1mm thick preparatory to distempering, complete all as specified and directed by Engr-in-Charge.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge.

M&L for PCC type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in parapets walls, benching, coping and filling at junction of brickwork and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete including use of forwork (straight or curved) complete all as specified and directed by Engr-in-Charge.

Cutting grooves in brick wall, 75mm wide and 65mm deep, including for inserting TMT bar as required length and shaping horizonatal/ vertical face of groove making good where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:11/2:3 , type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F 10mm dia TMT bars as in reinforcement, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia or occuring with clips complete all as specified and directed by Engr-in-Charge.

M&L for formwork to sides and soffits of beams chajjas and the like for rough finished surfaces of concrete complete all as specified and directed by Engr-in-Charge.

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick bedding layer in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All as per item No 22 above but except bricks etc complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-Charge.

M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, over and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42sqm but not exceeding 1.00sqm, in floors etc, over and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia curtain rod of mild steel with decorative finish, with fixing brackets complete all as specified and as directed (two brackets per opening of door and window and 08 Nos PVC rings) complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed by Engr-in-Charge.

M&L for Armstrong make ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, purlins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick PVC hollow wall paneling plain/ coloured/ printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note:- Glass and painting shall be measured and paid separately under appropriate item etc, complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc, complete all as specified and directed by Engr-in-Charge.

All as per item No. 40 above but ventilator fixed type with glazing bar without wire mesh and glass, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC frame as in door, cupboard etc of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge.

S&F 2nd class HW 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed by Engr-in-Charge.

S&F aluminium door with chowkhat of section 80mm x 40mmof wall thickness 1.58 and bottom rail 160 x 40mm of wall tick ness 1.58mm including glazing with 5.5mm thick sheet glass incl fittings such as aluminium tower bolt-1 No, handle-2 Nos, glazing pins, clips, beading and hydraulic door closure regulated designated 3 universal type complete all as specified and directed by Engr-in-Charge. The shutter frame shall be tied at top (internally) with screw of round bar 10mm dia ccomplete all as specified and directed by Engr-in-Charge.

S&F aluminium window chowkat of 89x 32mm with wall thickness 2.75 ( weight 1.81 kg/RM) incl double shutter of section 50 x 35 with wall thickness 1.5 incl including double shutter( glazed and gauzed shutter) incl 5.5 mm thick glass tinted, wire cloth 0.45 mm nominal dia of wire cloth and average width of aperture 1.25 mm including aluminium grills, fitting such as aluminium tower bolt, handles complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (anythickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by Engr-in-Charge.

Supply only 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/ wodden doors as in repairs, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel pressed handles of size 150mm, oval type, stove enamelled black, complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type anodised of size 125mm etc. complete all as specified and directed by Engr-in-Charge.

S&F stainless steel steel butt hinges cold rolled of size 100mm medium weight, complete all as specified and directed by Engr-in-Charge.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed by Engr-in-Charge.

Demloition of Mud in roof, any thickness, including plastering and leeping (measured full thickness removed or a part thereof), complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3Kg/ Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.20 kg/Sqm, complete all as specified and directed by Engr-in-Charge.

M&L for PCC padding 1:2:4, type B-1(using 20 mm garded stone aggregate) of average thickness 75 mm to be provided in slope, complete all as specified and directed by Engr-in-Charge.

M&L for 40 mm thick brick tiles laid on cement mortar and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed by Engr-in-Charge.

All as per item No. 63 but except tiles, complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exceeding 10 cm but not exceeding 20 cm girth, complete all as specified and directed by Engr-in-Charge.

Taking down rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed by Engr-in-Charge.

S&F PVC rain water pipes (SWR) 110mm dia(Single socketed, in any length with rubber joints, fixed to walls with flat iron clamps complete all as specified and directed by Engr-in-Charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 duly cuting, welding bending & fixing complete all as specified and directed by Engr-in-Charge.

Taking up or down, steel tubing 15mm bore and connections and removal from site, complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

Taking up or down, steel tubing 20mm bore and connections and removal from site, complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors,complete all as specified and directed by Engr-in-Charge.

S&F, sheet glass shelf (450mm long) assembly consisting of 8mm thick sheet glass shelf 15 cm wide with chromium plated bracket guard and railing fixed in repair, complete all as specified and directed by Engr-in-Charge.

S&F, corner glass shelf (300mm long) assembly consisting of 8mm thick sheet glass shelf with chromium plated bracket guard and railing fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F in repair; Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed by Engr-in-Charge.

S&F, brass CP central hole, cast copper alloy fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends basin mixer with copper pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair 3 in 1 wall mixer telephonic type chromium plated with CP wall flange, 1.5 Meter Long Easy Flex Tube in Chrome Finish and Hand shower complete all as specified and directed by Engr-in-Charge.

S&F in repair; 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore long body bib tap with wall flange, cast copper alloy, chromium plated and screwed to iron pipes or union fittings complete all as specified and directed by Engr-in-Charge.

S&F in repair for fancy type chromium plated stop valves, cast (angle cock) copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and directed by Engr-in-Charge.

S&F in repairs; 15mm bore PVC connection and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore chromium plated two way stop valves cast copper alloy screwed down high pressure with with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose of chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position complete all as specified and directed by Engr-in-Charge.

S&F steel plate rack made of stainless steel sheet 1mm thick over all size 900mmx750mm complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed but fancy type, Chromium Plated with long shank and cup (concealed type) etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Handy Folding Stainless steel Towel Rack-24 Inches with chromium plated bracket complete all as specified and as directed by Engr-in-Charge.

S&F Brass chromium plated single towel rail 20mm dia, D type, 600mm long between flanges fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repair, complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed including 15 mm dia Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc complete all as specified and directed by Engr-in-Charge.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. Complete all as specified and directed by Engineer-in-charge.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed by Engr-in-Charge.

S&F waste coupling suitable for urinals, bore dia of discharge pipe 32mm of PTMT (half or full threaded), (Minimum weight 45gms), complete all as specified and directed by Engr-in-Charge.

S&F in repair Coupled Closet WC colour, Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set. Size 380x660x765mm and Cistern with cistern fittings complete all as specified and directed by Engr-in-Charge.

S&F in repair comlpete flush kit set for coupled closet WC, complete all as specified and directed by Engr-in-Charge.

S&F aluminium (aluminium body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F 40mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) for sink fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks three layered 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable waer tank and s&f of new 20mm dia ball brass valve, complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable waer tank and s&f of new 20mm dia ball brass valve, complete all as specified and directed by Engineer-In-Charge.

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engr-in-Charge.

DUGGAL CONSTRUCTION CO