Certain repair to retaining wall and fencing in Bharatpur lines at Military Station Dharamshala .

Amount

Demolition of stone/boulder masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M & L for Cement concrete type C2 (1:3:6) in foundations, filling and mass concrete using 40mm graded aggregate complete all as specified and directed.

M & L for walling of random rubble stone masonry brought upto course well bonded bedded and solidly hearted built in CM 1:4 but except stone complete all as specified.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 brought upto courses complete all as specified & directed.

PCC M-15 (Nominal Mix ) Using 20mm graded crushed stone aggregate as in coping and Bond stone including necessary formwork complete all as specified and directed.

M & L for Hand packing of Broken stone or boulders (any thickness) at back of walls over areches etc and raising (or lowering ) to the required level all as specified and directed

PVC (SWR) pipe 110mm dia of pressure rating 4Kg/Sqcm fixed in retaining wall complete all as specified.

Extra over stone walling for hammer dressing with maximum despression from a straight edge held against the surface not exceeding 40mm dressing on sand stone complete all as specified.

Raised pointing to random rubble walling uncoursed in cement mortar 1:4 complete all as specified.

Dismantling mild steel work in fencing posts and sturts complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc. 50 mtr and making good surface complete all as specified.

S & F mild steel angle iron in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified

Preparing old surfaces of steel of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as in repair complete all as specified and directed. Note-: Each line wire to be measured.

M/S MADAN GOPAL and CO

ABHAY ELECTRICAL

Krithvik Electricals

M/S RANA BUILDERS

surinder kumar jindal & bros.

M/S JUGAL KISHORE AND COMPANY