Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder and reasonable rate quoted | |
| 2 | L2₹15.0 L+₹3,965.50 (0.27%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹15.4 L+₹43,942.40 (2.95%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹16.0 L+₹1.0 L (6.95%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹16.6 L+₹1.6 L (11.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
30 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PULGAON
GE PULGAON CAD CAMP PULGAON
CERTAIN B/R WORKS OF MES INSTALLATION IN RA AREA AT CAD PULGAON
2022_MES_521829_1
9016/PUL/E8
Open Tender
Civil Works
Item Rate
180 days
GE PULGAON
AS PER TENDER DOCUEMENTS
8 documents required · 8 mandatory
₹500
GE PULGAON
₹30,000
Yes
4 Jul 2022
4 May 2022
6 Jun 2022
4 May 2022
30 May 2022
18 May 2022
4 May 2022 - 17 May 2022
60 days
Amount
S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing existing AC sheets complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of existing existing AC sheets complete all as specified and as directed.
Dismantling of timber scantlings 40 Sq cm and over in section in any position, unframed work complete all as specified and as directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.
Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-410W Gde-E-250 complete all as specified & as directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed .
M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M&L for preparing old painted surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
Dismantling ceiling boards/insulation boards as in ceiling of any description or size including cover fillets complete all as specified and as directed.
M&L for 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each complete all as specified and directed.
Taking down Shutters of any description n exc 1.00 Sqm each n exc 2.00 Sqm each complete all as specified and as directed.
Taking down Shutters of any description n exc 1.00 Sqm each each complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.
S&F Pressed steel frames for doors/windows size of 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed
Supply & Fixing 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply & Fixing 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated without sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and as directed .
Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.
Supply & Fixing 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed .
Supply & Fixing 75mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed.
Supply & Fixing 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed .
Supply & Fixing 100mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and as directed .
Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed .
Supply & Fixing 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and as directed .
S& F in repairs Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete all as specified and as directed .
S& F 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
S& F 4 mm thick sheet figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.
M&L for preparing new or previously untreated surfaces wood or wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .
Supply & fix in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and as directed .
S&F Anodised Aluminium frame work in partition/doors/windows with shutter all a round and including aluminium beading,glazing cleats fixed in frames, Neoprene rubber beading/packing including 150 mm handle, 200 mm tower bolt etc complete all as specified and as directed .
S&F in repairs 12 mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .
S & F in repair decorative aluminium grill,weight not less than 3.131 kg/sqm (with frame of size 20x20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screwscomplete all as specified and as directed .
S&F cast iron body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed .
S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long complete all as specified and as directed .
S&F Mortice lock, vertical type, size 100 mmMild Steel 4 livers complete all as specified and as directed .
Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed .
Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 using old size bricks complete all as specified and as directed .
Taking down cement plaster on bricks or stone walls etc including raking out joints racking for key scrubbing down with water etc. complete all as specified and as directed .
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement incliding Taking down complete all as specified and as directed .
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement incliding Taking down complete all as specified and as directed .
M & L to apply 3 mm thick or two coat wall care putty over on plastered surfaces for even & smooth finishing complete all as specified and as directed .
M&L for preparing surface of wall priming plastered and other surfaces two coat of Oil bond Distermper complete all as specified and as directed .
M&L for preparing surface of wall priming plastered and other surfaces two coat of cement base paint over a coat of White priming complete all as specified and as directed .
Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed .
M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement complete all as specified and as directed .
M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub bases/floors/pavings etc complete all as specified and as directed.
M&L for 40 mm PCC 1:2:4 type B1 using 20 mm graded stone aggregates complete all as specified and as directed .
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square/rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigment to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .
All as item No 18 here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified and as directed .
M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed .
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed .
S&F in Steel rolling shutters, thickness of laths in 1.00 mm with out all bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: push pull or manual type and dismatling of old rolling shutter complete all as specified and as directed .
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed .
S&F Concertina coil 600mm dia including securing tying at crossing and provision of galvanised mild steel wire staples or steel pins etc, complete all as specified and as directed .
Ankit Construction
Arnav Enterprises
M/s MM TRADERS
RAJ ENTERPRISES
M/S Ramakant Chourasia
SHREE SIDDHIVINAYAK TRADERS
SHRI RANI SATI TRADERS
Bidder Name
Ankit Construction
RAJ ENTERPRISES
SHRI RANI SATI TRADERS
SHREE CONSTRUCTIONS
SHREE SIDDHIVINAYAK TRADERS
M/S Ramakant Chourasia
Arnav Enterprises
M/s MM TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .