SPECIAL REPAIRS TO BLDG NO XI JCOS AND OR FAMILY WARD AT MH WELLINGTON UNDER GE WELLINGTON

Amount

Dismantling Asbestos cement (Corrugated, semi corrugated sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F 6mm thick Non-Asbestos high impact polypropylene reinforced cement corrugated sheets conforming to IS 14871 of terracotta red colour as in roof coverings/cladding to wall, fixed with self drilling and tapping screws with EPDM rubber washer complete all as specified and as directed. Note : Fixing will be carried only through technical assistance/direction of manufacturer.

S&F 6mm thick Non-Asbestos high impact polypropylene reinforced cement plain sheets conforming to IS 14871 of terracotta red colour as in ridges, fixed with self drilling and tapping screws with EPDM rubber washer complete all as specified and as directed. Note : Fixing will be carried only through technical assistance/direction of manufacturer.

M&L Providing PCC 1:2:4, type B0 using 12.50 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section in any position as in unframed work, complete all as specified and directed.

M&L Second class hard-wood in scantlings, clean sawn, timber fixed as in roof members complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing, including distance pieces (Fe 410 -W (Gde E-250) Quality -A) complete all as specified and as directed.

Dismantling of ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F GI frame work for seamless ceiling with size of grid 605 x 605 mm comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre and 8mm thick V-board ceiling tiles fixed complete all as as specified and as directed.

M&L Preparation of new ceiling surfaces, applying one coat of smart care primer (Primer cum sealer), applying two coat of Oil Bound Distemper of approved colour by roller over 3 mm thick of putty all as manufacturer instructions complete all as specified and as directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc., complete all as specified and as directed.

S&F PVC (SWR) Pipe 180mm dia, as in half round gutters including fixing with PVC Clamps suitable for Non AC Sheets roof complete all as specified and as directed.

S&F PVC 180mm dia drop ends/stop end suitable for 180mm half round valley gutters complete all as specified and as directed.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends, 110mm dia, any radius, complete all as specified and as directed.

Demolition of cement concrete in ground floor as in paving not exceeding 15 CM thickness (below of above ground level) complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L Vitrified ceramic tiles, Dark shade, 10mm thick (Square/ Rectangular) polished, area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, as in floors etc., complete all as specified and directed.

M&L Vitrified ceramic tiles, Dark shade, 10mm thick (Square/ Rectangular) polished, area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster in cement mortar 1:4, as in vertical surfaces like skirting/ dado etc., complete all as specified and directed.

M&L Non Skid ceramic tiles, Coloured, 7 to 8 mm thick, (squares/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, as in floors etc., complete all as specified and directed.

M&L Glazed ceramic tiles, coloured, 450x350x7 to 8 mm/ 600x300x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigments to match over and including 10mm thick rendering in cement mortar 1:4 in vertical surfaces like dados, skirting etc., complete all as specified and directed.

M&L 25 mm thick, plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in flooring complete all as specified and as directed.

M&L 20 mm thick, Granite (of any type) slab, machine cut, (table rubbed and polished) laid, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, over and including 15mm thick screed bed in cement mortar 1:4 as in steps, jambs, pillars, window - cills, cooking platforms and like complete all as specified and as directed.

M&L 20 mm thick, Granite (of any type) slab, machine cut, laid and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing over and including 12mm thick rendering in cement mortar 1:3 as in vertical surfaces complete all as specified and as directed.

M&L Rounding edges of stone slabs one edge, such as steps, cooking platforms and other similar situations, complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Taking down shutters exceeding 1 sqm but not exceeding 2 sqm complete all as specified and as directed.

S&F Two track sliding window with two or more shutters using aluminium powder coated sections weighing not less than 0.55 kg/m including necessary joining cleats, 5 mm thick tinted glass with rubber beadings and glazing clips, handle, lock, etc., complete all as specified and directed by Engr-in-Charge.

S&F Three track sliding window with two or more shutters using aluminium powder coated sections weighing not less than 0.55 kg/m including necessary joining cleats, 5 mm thick tinted glass with rubber neoprene packing and glazing clips, handle, lock, etc., complete all as specified and directed by Engr-in-Charge.

S&F Three track sliding window with two or more shutters using aluminium powder coated sections weighing not less than 0.55 kg/m including necessary joining cleats, 5 mm thick tinted glass with rubber neoprene packing and glazing clips, one shutter of stainless steel mosquito proofing net with aluminium beadings, handle, lock, etc., complete all as specified and directed by Engr-in-Charge

S&F Four track sliding window with two or more shutters using aluminium powder coated sections weighing not less than 0.55 kg/m including necessary joining cleats, 5mm thick tinted glass with rubber neoprene packing and glazing clips, one shutter of stainless steel mosquito proofing net with aluminium beadings, one shutter of aluminium wire mesh grills and aluminium beadings, handle, lock, etc., complete all as specified and as directed by Engr-in-Charge.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F Powder coated aluminium door shutters with section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc complete all as specified and directed.

S&F Powder coated aliminium ventilators with section weighing 0.55kg/m, fixed glass/louvers type, including 5mm thick frosted glass and rubber neoprene packing complete all as specified and directed.

M&L 2nd class hard wood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered and put together with glue, pinned at joints supplied and fixed complete all as specified and as directed.

S&F 35mm thick, factory made second class hard wood plain, framed, paneled shutters with lock rail and panels of timber flat on sides (feather edged), or 12mm thick veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats, complete all as specified and as directed.

S&F 30mm thick, 2nd class hard wood glazed and skeleton, shutters, divided into squares to receive glass, gauge etc (with sash bar) with plain chamfered or rounded, mitred and rebated sash bars any numbers, the size of member of shutter as specified in SSR Pt-I clause 8.24 (b) as in window & ventilators shutters fitted to chowkat complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. Square tube, fixing in opening as per specification complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S.frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixed in the frame at site as per specification complete all as specified and as directed.

S&F mild steel work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed.

M&L Plain cement concrete 1:3:6, type C1 using 20 mm graded stone aggregate as in bed blocks for hold fast and the like of any description over 10mm in width or girth not otherwise described complete all as specified and as directed.

S&F 100 mm long Mild Steel Butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 100mm long Stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy complete all as specified and as directed.

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with Tinned Tacks or galvanised wire staple complete all as specified and as directed.

S&F 4.0mm thick, sheet glass in squares not exceeding 0.50 Sqm in each pane, ordinary quality and glazing with oil putty or wooden beads complete all as specified and as directed.

S&F in repairs Door closure, hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, aluminium (extruded section body), complete all as specified and as directed.

S&F in repairs 100mm, Mortice lock, vertical type of brass body, 2 levers, complete all as specified and as directed.

M&L roughening of old wooden surface of any description width or girth with machine including cleaning, preparing the surfaces and one coat of wood filler and two coats of melamine polish, complete all as specified and directed.

S&F Framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works with mild steel of grade Fe-290 (Grade E-165) complete all as specified and as directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and as directed.

M&L Cupboard Shutter in Required sizes made out of 18 mm thick HDHMR Board one side decorative Lamination, other side balancing Lamination. finished at all level including all fixing hardware and solvent as per the Manufacturers Instructions and as per direction of Engineer- in-Charge.

M&L Cabinet Carcase of Required sizes made out of 18mm thick HDHMR Board one side decorative Lamination, other side balancing Lamination at all 4 sides and 8 mm thick board as backing of Cabinet, finished at all level including all fixing hardware and solvent as per the Manufacturers Instructions and as per direction of Engineer in Charge

M&L Shelf/Partition of Required sizes made out of 18mm thick HDHMR Board one side decorative Lamination other side Balancing Lamination consisting of panels and supporting the hold of Shelf/ Partition, finished at all level including all fixing hardware and solvent as per the Manufacturers Instructions and as per direction of Engineer in Charge

S&F Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete all as specified and directed.

S&F 100 mm Stainless Steel handles, Rectangular Shape polished bright complete all as specified and as directed.

S&F Telescopic Channel in required length including all fixing accessories/ hardware complete all as specified and as directed.

S&F 18/19 mm thick. Prelaminated particle board, interior grade, one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

M&L Second class hard wood Plain fillets, square rectangular or triangular in section exceeding 6 not exceeding 13 sqcm, wrought, clean sawn, secured with nails or brads complete all as specified and as directed.

S&F Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed.

S&F 100 mm brass handles, cast type, polished bright complete all as specified and as directed.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F 40 mm butt hinges, cast brass with mild steel hinge pin, bright polished type B-11 complete all as specified and as directed.

S&F 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white with P or S trap including flushing pipe, PVC seat cover (white) closed pattern with flat bottom, cover and brass chromium plated hinging device, including connection to drain and to flushing pipe, antisyhonage pipe etc complete all as specified and as directed.

S&F in repairs, Floor mounted coupled water closet of size 380 x 660 x 765 mm with flushing cistern, with UV soft close seat cover, hinges, fixing accessories set including S trap complete all as specified and as directed. Make: Cat No.LYS-WHT-38751S & LYS -WHT-38201 of Jaquar or techno-commercially equivalent.

S&F in repairs PVC valve less, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F in repairs, gratings, 125mm dia with waste hole, complete all as specified and as directed.

M&L PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and as directed.

S&F in repairs, Vitreous china wash basin, Oval shape, counter type, white, size 450 x 300mm excluding taps, but including brackets and cutting for and pinning in ends of brackets or erecting stand and waste pipe etc, complete all as specified and as directed.

S&F in repairs, Vitreous china wash basin, Table top, white, size 420 x 420 x 135mm, excluding taps but including brackets and cutting for and pinning in ends of brackets or erecting stand and waste pipe etc, complete all as specified and as directed.

S&F in repairs Pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes of 15mm bore complete all as specified and as directed. Make :- Cat No. CON- 127BKN of Jaquar or techno-commercially equivalent.

S&F in repairs, Brass CP Wall mixer for mixing hot & cold water with provision of over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges screwed down for iron pipe of 15mm dia bore complete all as specified and as directed. (Make : Cat No. CON- 273KNUPR of Jaquar or techno-commercially equivalent.)

S&F in repairs over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long complete all as specified and as directed.

S&F in repairs Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed. Make : Cat No. CON - 037KN/ 047KN of Jaquar or techno-commercially equivalent.

S&F Angular Stop valve, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed. Make : CON - 059KN of Jaquar or techno-commercially equivalent.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs 2in1 bib tap, chromium plated, fancy type, screwed for existing iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed.

S&F in repair Sensor Faucet for Wash Hand Basin, not less than 140 mm body length with complete fittings complete all as specified and directed

S&F in repairs Health Faucet with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer complete all as specified and as directed. MAKE: Cat No.ALD-577 of JAQUAR or techno-commercially equivalent.

S&F in repairs Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and as directed.

S&F in repairs Glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing 60cm long and fixed complete all as specified and as directed.

S&F in repairs Soap dish chromium plated, cast copper alloy complete all as specified and as directed. Make: Cat No.ACN-1131N of JAQUAR or techno-commercially equivalent.

S&F in repairs Towel ring square/rectangular with round flange chromium plated, cast copper alloy complete all as specified and as directed. Make: Cat No.ACN-1121N or ACN-1121BN of JAQUAR or techno-commercially equivalent.

S&F in repairs Tubular towel rail, 20mm dia, D type, chromium plated, cast copper alloy 60cm long complete all as specified and as directed.

S&F in repairs Towel rack, 600 mm long with lower hangers, chromium plated, cast copper alloy as in bathrooms complete all as specified and as directed. Make: Cat No.ACN 1181N of JAQUAR or techno-commercially equivalent.

S&F in repairs CP toilet paper roll holder chromium plated, cast copper alloy complete all as specified and as directed. Make: Cat No.ACN 1155N of JAQUAR or techno-commercially equivalent.

S&F Grab bar vertical Swing, Satin including fixing accessories set complete all as manufactures instructions and directed. Make : Cat No. WAC-SAP-BG0800CS of Jaquar or techno-commercially equivalent.

S& F Grab bar 842mm long, Satin including fixing accessories set complete all as manufactures instructions and directed. Make : Cat No. WAC-SAP-BR0750CS of Jaquar or techno-commercially equivalent.

Dismantling of PVC or reinforced cement concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed

S&F 75 mm dia PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm dia PVC ( SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm bore, including cleaning for refixing or removal to store complete all as specified and as directed.,

Taking up or down steel tubing and connections of 20mm bore, including cleaning for refixing or removal to store complete all as specified and as directed,

Fixing only concealed galvanised iron tubes of 15mm bore, medium grade, with all fittings and fixed to walls and ceiling including cutting and chasing and making good complete all as specified and as directed.

Fixing only concealed galavnised iron tubes of 20mm bore, medium grade with all fittings and fixed to walls and ceiling including cutting and chasing and making good complete all as specified and as directed.

S&F Concealed galavnised iron tubing of 15mm bore, medium grade with all fittings and fixed to walls/brick walls/ceiling or in floors including cutting and chasing and making good complete all as specified and as directed.

S&F Concealed galavnised iron tubing of 20mm bore, medium grade with all fittings and fixed to walls/brick walls/ceiling or in floors including cutting and chasing and making good complete all as specified and as directed.

Dismantling of water tanks exceeding 500 ltrs and not exceeding 1000 ltrs, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks, 1000ltrs (cylindrical vertical with closed top screwed type) hoisted and fixed in position complete all as specified and as directed.

S&F in repairs stainless steel curtain rod 20 mm dia including side caps and single/double brackets complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed.

M&L Brick work built in cement mortar 1:6, with sub class 'B' bricks (old size) straight or curved on plan exceeding 6m mean radius, complete all as specified and as directed.

Taking down cement plaster any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:6 finished even and smooth without using extra cement on fair faces of brick/concrete surfaces complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in surface channel and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc, complete all as specified and as directed.

M&L Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M&L Preparation of old steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified.

M&L preparing the wooden surfaces of any description, width or girth including cleaning and applying a coat of wood filler and polishing two or more coats of French polishing complete all as specified and as directed.

M&L Complete removal of existing treatment of wall surfaces and preparation of surfaces, applying two coats of Oil Bound washable Distemper over a coat of primer over a coat of wall care putty including sanding, complete all as specified and directed. Note :- Putty will be measured and paid separately.

M&L Wall Care putty on wall average thickness 3 mm one coat complete all as specified and directed.

M&L Complete removal of existing treatment of wall surfaces and preparation of surfaces, applying two coats of Plastic Emulsion Paint over primer, over 3 mm thick of wall care putty including sanding and complete all as specified and directed.

M&L Complete removal of existing treatment of wall surfaces, preparation of old plastered surfaces, applying two coats of antialgae paint weather coating over primer and applying two coats of external wall putty on external wall complete all as specified and as directed. Note : Antialgae paint shall be carried only by the authorised applicant of manufacturer of the paint.

M&L Complete removal of existing treatment of wall surfaces, preparation of old plastered external wall surfaces, applying two coats of exterior emulsion paint over one coat of exterior wall primer with Brush/Spray/Roller all as per manufacturers instruction and all as specified and as directed.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer and over two coats of external wall care putty complete all as specified and as directed

M&L for preparation of newly treated surfaces of walls and applying two coat of oil bound distemper over a coat of wall care putty including primer complete all as specified and as directed.

M&L 75 mm thick, Cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate finished even and fair as in plinth protection and hard standing complete all as specified and directed.

M&L Hard core of gauge not exceeding 63 mm using broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L Plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

Demolition of cement concrete reinforced in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.

M&L Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L Mild Steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 200 mm complete all as specified and directed

Demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 300 mm complete all as specified and directed

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc., not exceeding 10 sqm on plan and not exceeding 1.5 m in depth in hard/dense soil and getting out, complete all as specified and directed

M&L SGSW drain pipes, 200 mm bore laid in trenches and jointed complete all as specified and directed.

M&L Reinforced concrete pipes 300mm bore, class NP2, laid in trenches & jointed with collars complete all as specified and directed.

M&L cement concrete bed with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate to drain pipes including packing under and hunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe complete all as specified and directed.

M&L cement concrete bed with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe complete all as specified and directed.

Returning filling in (soil), including spreading, levelling , watering and well ramming in layers not exceeding 25cm, complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

M&L Cutting into existing manhole for connecting new drain pipes of 200 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B1, smooth finished, and reforming benching as required complete all as specified and as directed.

Separating, scraping & cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, light fitting, bell etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Taking down copper/aluminium sub main wiring of any size and runs complete removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm (nominal area) FRLS grade, PVC insulated, unsheathed stranded copper conductor, single core cable, 1100 volts, grade in and including PVC concealed conduit, medium grade complete with conduit fittings/accessories with provn of MS terminal boxes of suitable size including provn of modular cover plate for housing of modular switches and sockets etc., including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor for earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the followings:-

(a) One light/Exhaust fan point controlled by one 5 Amps one way switch complete all as specified and as directed.

(b) One 6A 2/3 pin switch socket out let multipurpose on independent board complete all as specified and as directed.

(c) One bell/buzzer point controlled by one push button on independent board complete all as specified and as directed.

(d) One 5A 2pin/3pin socket out let multipurpose on same board complete all as specified and as directed.

All as per item No. 151 above but wiring complete with 4 Sqmm cable and 4 sqmm earth continuity cable for 3 pin 15A socket on independent board complete all as specified and as directed.

Cutting chases in concrete floor/wall/roof/truss for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exceeding 10cm girth (stone bldg) complete all as specified and as directed.

S&F switch board box suitable for two modular plate of size 75X75x50mm including cutting, grooving and plastering etc. .

All as item No.154 above but three modular plate of size 100x75x50mm complete all as specified and as directed.

All as item No.154 above but four modular plate of size 135x75x50mm complete all as specified and as directed.

All as item No.154 above but six modular plate of size 170x75x50mm complete all as specified and as directed.

Supply and fix frame plate with match cover two module plate complete all as specified and as directed.

All as item No.158 above but three module complete all as specified and as directed.

All as item No.158 above but four module complete all as specified and as directed.

All as item No.158 above but six module complete all as specified and as directed.

S&F Modular switch, one way, 6A, 230V, AC, 50 HZ, SP, one module complete all as specified and as directed.

S&F Modular socket, 6 Amps, 2/3 pin socket, 230V, AC, 50 HZ, SP, two module complete all as specified and as directed..

S&F Modular switch, one way, 16A, 230V, AC, 50 HZ, SP, one module complete all as specified and as directed..

S&F Modular socket, 6/16 Amps, 2/3 pin socket, 230V, AC, 50 HZ, SP, two module complete all as specified and as directed..

S&F Ceiling rose, 3 terminals, 230V, AC, 50 HZ, SP complete all as specified and as directed.

S&F Modular Bell Push, 6 Amp, one module complete all as specified and as directed.

S&F Bell, AC, 230 Volts, Single Pole complete all as specified and as directed.

S&F lamp holder, PVC with card grip cap complete all as specified and as directed.

S&F LED Lamp, pin type, 7 Watt complete all as specified and as directed. Make Havell cat No-LHLDERHEMD8x007 or techno-commercially equivalent.

S&F Linear & compact, 9 W, mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser, 9W, LED 6000K complete all as specified and as directed. Make: Havells Cat No LHEXARO7PN1 W 009, or techno-commercially equivalent.

S&F surface full lit luminaire with glare free uniform illumination with linger life and less maintenance 24W in 2 ft x 2 ft (100 Lumen/Watt) complete all as specified and as directed. Make: Crompton Cat No: LCTLRNE-24-FO-TL or techno-commercially equivalent.

S&F Wall mounted, 20W, LED 6000K (4 ft.) batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, lamp color white complete all as specified and as directed. Make:- Havells Cat No: LHEXBYPNIN1W020 or techno-commercially equivalent.

Taking out old unserviceable MCB DBs with MCBs of any type/ size/ ways complete all as specified and as directed.

S&F MCB, DB, TPN, 6 way, 415V, double door type, minimum cap of 200 Amps rated busbar including necessary dummy plate, flush with wall complete with all accessories all as directed.

S&F MCB, DB, SPN, 6 way, 415V, double door type, minimum cap 200 Amps rated busbar including necessary dummy plate, flush with wall complete with all accessories all as directed.

S&F MCB, DB, SPN, 12 way, 415V, double door type, minimum cap 200 Amps rated busbar including necessary dummy plate, flush with wall complete with all accessories all as directed.

S&F MCB, TPN, 440 Volts, 63 Amps complete all as specified and as directed.

S&F MCB, SPN, 230 Volts, 6 to 32 Amps complete all as specified and as directed.

S&F MCB, SP, 230 Volts, 6 to 32 Amps complete all as specified and as directed.

M&L Sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit of suitable dia and accessories with one run of 4 Sqmm single core PVC insulated copper conductor as earth continuity conductor connected with earth dolly and mains complete all as specified and as directed. Note:- Two Runs of 6 sqmm and one run of 4 sqmm copper cable and one run of PVC conduit will be measured as one length.

M&L Sub main wiring with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable, 1100Volt grade multistranded copper conductor drawn through and including PVC conduit of suitable dia and accessories with one run of 2.5 Sqmm single core PVC insulated copper conductor as earth continuity conductor connected with earth dolly and mains complete all as specified and as directed. Note:- Two Runs of 4 sqmm and one run of 2.5 sqmm copper cable and one run of PVC conduit will be measured as one length.

S&F LED street light fitting, 20 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, with IP 65/66 protection complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket, with one single pole MCB 240V, 20 Amps complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick burries directly in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to GI earth wire 4 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to earthing test point, main DB, panel board, continuous earth lead protected by 15 mm bore dia GI pipe light grade, 20 mm bore dia GI pipe for watering, necessary cover with suitable reinforcement complete all as shown on electrical plate No.5 of SSR part-I of 2009 including testing on completion. complete all as specified and directed. Note:- Rate quoted shall deem to include for GI earth and its protection pipe lead up to 7.5 mtr length.

S&F Rigid non-metallic PVC conduit of 20mm dia inclusive of boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

RAJASEKARAN

Sri Ragavendra Construction

Sree Constructions

ACE PROMOTERS