Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹49.3 L
EMD Value
₹49,300
Closing Date
8 Mar 2023, 3:00 pmClosed
Block debelopment officer Thandarampattu
Block debelopment officer Thandarampattu
Construction of New Two Class room,Girls Toilet,Boys Toilet Renovation of three class,Two class,Store,Kitchen Toilet and Compound wall Desurpalayam PUES Campas at Kilvanakampadi Panchayat
2023_RDTN_292245_1
Roc. No. A4/3018/2022 Dt.03.02.2023
Open Tender
Civil Works
Item Rate
90 days
Thandarampattu
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹49,300
Yes
10 Mar 2023
2 Mar 2023
8 Mar 2023
2 Mar 2023
8 Mar 2023
2 Mar 2023
Amount
Construction of two class room building
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS 20B for narrow foundation
Refilling the basement with excavated earth other than sand complying the Standard specification
Supplying and filling of M Sand transported from the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete.
Cement concrete 1:4:8 mix using 40mm size LSS metal including cost and conveyance of all materials to site, labour charges for laying consolidation, curing etc., complete.
Supplying and filling of good earth filling locally available earth transported from the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete.
Brick work in cm 1:5 mix using best country bricks including cost, conveyance of all materials to site, labour charges etc., complete
First floor
Brick partition walls of 11.50cm thickness using best quality II class table moulded bricks 8"3/4 x 41/4" X23/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.
Terrace floor
Supplying and erection centering for sides and soffits including supoorts and struttion up to 3.29m height for plane surface in all floors with all cross bracings using mild steel of size 90CMx60Cm and 10 gauge stiffened, welded with mild steel angles of size 25mm x 25mm x3 for boarding laid over siver oak ( Country wood) just of size 10 Cm x6.5cm dia spaced about 92 cm Centre to center and supported by casurmas propels of 10Cm To 13Cm dia spaced at 75Cm Center etc Complete complying with standard speicification and as directed
lintel , beam roof
Square column
Providing and laying in position, M-20 Grade in accordance with IS:456-2000, using 20mm and down grade hard broken granite stone jelly for all RCC Items of works with minimum cement content of 350kg/m3 and maximum water cement ratio of 0.50, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9130 to accelerate, rated setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m) 7730kg. of 20mm machine crushed stone jelly and with about (3.3cum) 5156 kg. of 10-12mm machine crused stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with Mechanical vibrators, finishing, curing, etc.,and providing fixtures like fan clamps in the RCC Floor / roof slabs wherever necessary without claiming extra, etc., Complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No Separate payment will be made by the Department for the excess usage of materials).
Ground floor
Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.
Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete for 10 cum
Terrace Floor finshed with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm
Providing and applying 10 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ), to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams, and Sun shades etc.to correct plane and level including scaffolding, hacking of surface, chiselling the undulated surface wherever necessary and curing etc., all materials and labour complete in all respects including all lead, lift and descent and as directed by the Enineer in charge. This rate includes the cost of providing Cement Mortar beadings for sun shades, steps,landing slabs, elevation etc. complete complying with standard specifications.
Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed.
Plastering with cm 1:5, 12mm Hick including cost conveyance, labour charges etc., complete
Paving the floor with best approved quality fine polished SHAHABAD stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification
Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 50 mm thick including cost and conveyance of all materials to siteand all labour charges for mixing, laying, curing etc complete for 10 cum
Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.
Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers
Fabricating, Supplying and fixng in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwiching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2Nos, for shutter is provided. 6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided.
Supplying and Painting new ceiling plastered surface with two coats of distempering one coat of distemper primer
Supplying and Painting new plastered internal wall surface with two coats of distempering one coat of distemper primer
Supplying and painting the walls with one coat of wall primer and two coats of Exterior emulsion (apex or equivalent) as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Supplying and fixing cuddapah slab for cupboard shelf
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on wor
Provision for Rain water pipe 3m
Electrification
Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 21)
Supply and fixing of C.F.L. 11Watts light and fittings etc.,SD80
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD110
Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL Bulk head Fitting SD83
Wiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories of 150x 100x 63m size T.W switch for 15A pin non interlocking plug including pin top with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug point (SD 27)
Supply and fixing of service accessories Service board SD 125
Construction of Girls Toilet building
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS 20B for narrow foundation
Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.
Centring Below GL
Column
Roof & Roof Beam
Shunshade
Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.
RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.
ground floor
Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.
ground floor
Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete
Towards the cost of steel door of size 1.00 mx1.80 m including all charges etc.
Towards the cost of steel door of size 0.75mx1.80 m including all charges etc.
Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc
Cost & Supply For Indian Type W.C including cost and conveyance of all materials to work site and labor charges etc complete.
Cost & Supply For European Type W.C including cost and conveyance of all materials to work site and labor charges etc complete.
Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.
Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.
Floor finishing with ceromic tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Provision for Hand Rail for SS Works
Provision for Water supply and Sanitary Arrangements
Water supply
32mm pvc pipe
32mm pvc Bend
32mm pvc Tee
32mm x 25mm pvc Reducer
25mm pvc Pipe
25mm pvc Tap
500 Liters Hdpe Tank
Sanitary supply
110mm pvc pipe 4KSC
110mm pvc Bend
110mm pvc Tee
Construction of Boyss Toilet building
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS 20B for narrow foundation
Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.
Centring Below GL
Column
Roof & Roof Beam
Shunshade
Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.
RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.
ground floor
Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.
ground floor
Towards the cost of steel door of size 1.00 mx1.80 m including all charges etc.
Towards the cost of steel door of size 0.75mx1.80 m including all charges etc.
Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc
Cost & Supply For Indian Type W.C including cost and conveyance of all materials to work site and labor charges etc complete.
Cost & Supply For European Type W.C including cost and conveyance of all materials to work site and labor charges etc complete.
Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc.
Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.
Floor finishing with ceromic tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete.
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Provision for Hand Rail for SS Works
Provision for Water supply and Sanitary Arrangements
Water supply
32mm pvc pipe
32mm pvc Bend
32mm pvc Tee
32mm x 25mm pvc Reducer
25mm pvc Pipe
25mm pvc Tap
500 Liters Hdpe Tank
Sanitary supply
110mm pvc pipe 4KSC
110mm pvc Bend
110mm pvc Tee
Renovation of two class room
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Provision for Rain water pipe 3m
Renovation of kitchen shed
Floor finishing with ceromic tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Electrical arrangements
Supply and fixing of single box type 4'40 W flu. fitting complete with tube copper choke and condencer with conduit pipe suspension from the ceiling with PVC unsheated leads from terminal to the fitting SD.84
Supply and fixing of W.T. Bulk head fitting complete with guard suitable for
Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open
Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, to house, the control switch regulator covered with nylon sheet of 3mm thick wi
Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - inte SD 34
Supply and Fixing of Ceiling fan includingn cost and conveyance of all materials and labour cherges etc complete.
Renovation of Store room
Floor finishing with ceromic tiles of size 20cmx20cm including costand conveyance of all materials to site and all labour charges etc complete
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Electrical arrangements
Supply and fixing of single box type 4'40 W flu. fitting complete with tube copper choke and condencer with conduit pipe suspension from the ceiling with PVC unsheated leads from terminal to the fitting SD.84
Supply and fixing of W.T. Bulk head fitting complete with guard suitable for
Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open
Wiring with 2 x 2.5 Sq.mm PVC uncheated SC alu.cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, to house, the control switch regulator covered with nylon sheet of 3mm thick wi
Supply and Fixing of Ceiling fan includingn cost and conveyance of all materials and labour cherges etc complete.
Renovation of PHC
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Renovation of COMPOUND WALL
Painting two coat of new iron works such as steel doors, Windows, Ventilatorsm, Window bars, Balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coat, etc., complete complying with stan
Painting two coats with approved emulsion paint over one priming coat of cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc, complete
Provision for supply and fixing of MS STEEL Gate includingn cost and conveyance of all materials and labour cherges etc complete.
Supplying & fixing of Granite slab of 20mm thick with nosing, cutting and bedding includingn cost and conveyance of all materials and labour charges etc complete.
Renovation of two class room
Dismantling of existing damaged flooring Concrete and clearing away from the site and carefully stacking the material etc complete:
Paving the Floor with Vitrified tiles in CM 1:3 20mm thick Including cost and conveyance of all materials to site and all labour charges etc complete.
Paving the Floor with scratch proof ceramic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete.
Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc
Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc
Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.
Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.
Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends,& clamps etc.,
ELECTRIFICATION ARRANGEMENT
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick Hylum sheet cover with TW Switch box And 5 A FT switch with marking good of the Concealed Portion With Suitable Colour for PVC Concealed Light / Fan Point (For Electronic regulator) (5 Points Per Coil) PVC Concealed Light point / fan point (For electronic Regulator) (SD 20)
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150 mm x 100mm x113mm TW Switch box With 3mm thick Hylem Sheet Cover for 5 A 3 Pin non inter Locking CS Plug with continuous earth wire connection of 14 SWG TC wire and marking good of the Concealed Portion With Suitable Colour for Concealed PVC Plug Point. (For electronic Regulator) (SD 38)
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K.Lite) Suitable for 11W CFL Lamp with (SD 80)
Supply and fixing of single box type 4' 40 W flu fitting complete with copper choke and condensor with Conduit Pipe Suspension from the ceiling with PVC unsheathed Copper leads fron terminals to the fitting. Tube Light Fitting (SD 88)
Supply and fixing of WT Bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) Suitable for 11W CFL Lamp with CFL. Bulk Head Fitting (SD 83)
Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with the existing down rod on the existing Clamps. Fan Fitting (SD 112)
16 Amps Main Stitch
Ground level earthing SD -233
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Kumar J
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .