Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹17.5 L+₹78,570 (4.69%)Rejected-AOC 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L2 | Rejected-AOC HIGHER RATE | |
| 3 | L3₹19.0 L+₹2.3 L (13.7%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE | |
| 4 | L4₹20.7 L+₹4.0 L (23.8%)Rejected-AOC RZ F1 104 MAHAVIR ENCLAVE PALAM NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L4 | Rejected-AOC HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹69,000
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI
CA NO GE/ND-05/2023-24 WELCOME MAINTENANCE AND CERTAIN B/R NATURE OF WORKS AND SEWAGE CLEANING IN DAD PANCHWATI UNDER GE NEW DELHI
2023_MES_588810_1
GE/ND-05/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹69,000
Yes
15 Jan 2024
10 Apr 2023
10 May 2023
10 Apr 2023
8 May 2023
24 Apr 2023
Amount
M & L for checking the leakage,blockage and petty repairs to bib taps, Pillar taps, Stop cock, Conceled stop cock, angle valves, gate valves etc of any description or size for stopping leakage of water by changing washers, etc all as specified and directed. ( NOTE : Fixtures/Fittings complete fixture shall be paid under relevant item against supply only and The rates quoted by the contractor are deemed to inclusive of Dhaga/safeda/PVC washers.) Note- 1. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. 2. Contractor Proper records (date wise) of complaints received & rectified by them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. 3. Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building in DAD Coplex Panchwati. Rate shall be quoted accordingly, keeping in mind above said all provisions.
Supply only chromium plated fancy type bib tap long body with flange fixed in 15mm bore of pipe, cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed.
Supply only Chromiumfancy type plated Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe.
Supply only ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball for 15/20 mm dia iron pipe (Minimum weight 142gms) complete all as specified and directed.
Supply only PVC connection 15 mm dia 45 cm/60cm long with 2 Nos PVC check nuts with washer complete all as specified.
Supply only chromium plated fancy type Stop valve cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed.
Supply only chromium plated angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, 15mm internal bore complete all as specified and directed.
Supply only chromium plated brass overhead shower with arm 255mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and directed.
Supply only brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and directed.
Supply only 15mm dia stop valve concealed type cast copper alloy, screwed down, high pressure chromium plated with long shank including making good dismantled portion complete all as specified and directed.
Supply only 32 mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified.
Supply only waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified.
Supply only waste fittings brass chromium plated 40 mm to 50 mm dia for stainless steel sink complete all as specified.
Supply only brass CP towel rail 60Cm long complete all as specified.(Make-Prayag /Cera/Parryware) complete all as specified and directed.
Supply only gun metal globe or gate valve 'ISI' MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 15 mm complete all as specified and directed.
Supply only gun metal globe or gate valve 'ISI' MARKED, with iron wheel head screwed both ends and for iron pipes and fixed for bore of pipe 25 mm complete all as specified.
Supply only small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed. Make :- Unik.(This item will not be measured against item No.43 &46 here in after).
Supply only small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and directed. Make :- Unik.(This item will not be measured against item No.44 &47 here in after).
Supply only small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 50 mm bore pipe (ISI marked) complete all as specified and directed. Make :- Unik.(This item will not be measured against item No.44 &48 here in after).
Supply only CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified and directed.
Supply only PVC syphone with handle complete for low level flushing cistern complete all as specified and directed. (Make: Superflush/ISI marked).
Supply only PVC handle heavy duty, for low level flushing cistern complete all as specified and directed .(Make : As per sample).
Supply only 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC all as specified and directed.
Supply only PVC polyplast float valve for cistern tank complete all as specified.(Make : As per sample).
Supply only plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified.
Supply only CP Health faucet for Europeon type WC with 1.5m long pipe as per approved sample complete all as specified and as directed by Engineer-in-Charge Make : Zim/Parko/Prayag.
Supply only , CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified.
M & L for petty repairs to joinerys works, such as easing/adjusting of door, repairs of wire mesh, cub board shutters, iron mongerys, of any type or description and any type of carpentery works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening , tightening of hinges or changing the position of hinges, adjustement of tower bolt,s sliding bolt etc complete all as specified and directed. Note : The rate quoted by the contractors is deemed to include the necessary tools and plants, screws, nails etc. Note- 1. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. 2. Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. 3. Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions.
Supply only sliding door bolts 250 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
Supply only MS pressed handles, stove enamelled black, 125 mm long complete all as specified.
Supply only MS barrel tower bolt, stove enamelled black 200mm long complete all as specified and directed.
Supply only 100 mm long MS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified and directed.
Supply only steel window handles(right & left) and peg stays etc as per sample complete all as specified and directed.
Supply only 100 mm size butt hinges of stainless steel medium weight. Make :- Beats or equvalant.
Supply only MS sliding door bolts 250 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.
Supply only 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply only aluminium anodised locking bolt of extruded section for WC/ Bath doors complete all as specified and directed.
Supply only 125 mm mild steel pressed handle oval type, stove enamelled black complete all as specified and directed.
Supply only 125 mm aluminium anodised handle cast type complete all as specified and directed.
Taking up or down GI steel water tubing 15mm bore and connections including cleaning complete all as specified and directed.
Taking up or down GI steel water tubing 25mm bore and connections including cleaning complete all as specified and directed.
Taking up or down GI steel water tubing 50mm bore and connections including cleaning complete all as specified and directed.
S&F galvanised steel water tubing 15mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified and directed. (Make : Jindal/Prakash)
S&F galvanised steel water tubing 25mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified.
S&F galvanised steel water tubing 50mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors complete all as specified.
S&F in repair stainless steel sink of size 914x460x203mm with bowl size 405x354x203mm. with drainage board of 1 mm thick sheet for kitchen with plug washer, waste pipe, cast iron cantilever brackets connecting union, fixed in position complete all as specified.
S&F in repairs stainless steel sink of size510x430mm with bowl size 428x380x200mm with out drainage board made out of ,304 grade Stainless steel,1.00 mm thick sheet for kitchen with cantilevers connecting union complete all as specified and directed.
Supply only 1.00mm thick stainless steel plate rack overall size (31X36X10 inch) fixed with steel screws complete all as specified and directed.
S&F in repair vitreous china wash basin white flat back size 550 x 400 mm including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead and other end fixed, PVC waste pipe, 32mm dia ,med grade, pipe with fittings fixed in wall connected to floor trap for drain out, complete including provision of pair or bracket of angle iron 35x35x6mm duly painted with two coat of synthetic enamel paint over one coat of red oxide zinc chromate primer and embedded one end of bracket in PCC 1:2:4 type B-1 bed blocks and cutting for and pinning in ends of brackets in walls and making good all as specified.
M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as directed and as specified.
S&F in repair water closet vitreous china squatting pan of ORISSA pattern size 580 mm X 440 mm white with integral foot rest incl setting the cast iron trap & pan into cement and sand mortar, provn of lime concrete bedding complete.incl valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete all as specified and directed.
S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, valveless syphonic action type PVC low level flushing cistern with inlet ball valve float & handle incl. brackets of 10 ltrs capacity complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern Ist quality complete all as specified and directed.
Taking down eaves gutter, rain water and soil waste pipe ( any size or pattern), incl. all fitting, heads , shoes, bends, swan necks, incl cleaning for refixing or removal to store complete all as specified and directed.
S&F 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.
-ditto- as item No-55 above but fixed on walls complete all as specified and directed.
S&F 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed .
-ditto- as item No-57 above but fixed on walls complete all as specified and directed.
S&F cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 100 mm dia complete all as specified.
S&F cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 100 mm dia complete all as specified.
S&F cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 75 mm dia complete all as specified.
S&F cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 75 mm dia complete all as specified.
S&F cast iron shoes of 100 mm dia complete all as specified.
S&F , in repairs, cone cap cast iron cowls for 100mm bore pipe complete all as specified and directed.
S&F , in repairs, cast iron cowls for 75mm bore pipe complete all as specified and directed.
S&F, in repairs, 100mm dia cast iron sanitary connection- short connections pipe of length 300mm (ISI MARKED) complete all as specified and directed
S&F,in repairs, salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150mm incl excavation earth work conc in Beds, surrounds kerbs & CI grating etc complete all as specified and directed.
S&F, in repairs, stack clamps out of 50 mm X 5 mm flat iron and 16 mm dia round bars incl bolts and nuts and securing ends of stays to walls or on roof fixed in repairs 100 mm bore pipe complete all as specified and directed.
S&F, in repairs, stack clamps out of 50 mm X 5 mm flat iron and 16 mm dia round bars incl bolts and nuts and securing ends of stays to walls or on roof fixed in repairs 75 mm bore pipe complete all as specified and directed.
Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified.
S & F in repair PVC (SWR) pipes single socketed, 110 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed .
S & F in repair PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed .
S & F in repair PVC (SWR) pipes single socketed, 50 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and directed .
S&F PVC (SWR) bends and shoes of any radius of 110 mm bore complete all as specified and directed.
S&F PVC (SWR) bends and shoes of any radius of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends and shoes of any radius of 50 mm bore complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y) of 110 mm dia equal or unequal complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y) of 75 mm dia equal or unequal complete all as specified and directed.
S&F PVC (SWR) branch piece, single (single Y) of 50 mm dia equal or unequal complete all as specified and directed.
S&F PVC (SWR) 110 mm dia junction single (single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) 75 mm dia junction single (single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) 50 mm dia junction single (single T) equal or unequal complete all as specified and directed.
S&F PVC (SWR) 125/110 mm dia 'P' trap complete all as specified and directed.
S&F PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified.
M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 100 mm bore of pipe. complete all as specified
M&L for Extra over cast iron pipe and fitting if lead joint are provided in lieu of cement joints for 75 mm bore of pipe. complete all as specified
Dismantling of old PVC water tank including supply & fixing rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 250 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed.
Dismantling of old PVC water tank including supply & fixing rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed.
Dismantling of old PVC water tank including supply & fixing rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs incl making connection with fitting for inlet & outlet pipe complete all as specified and directed.
M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.
M&L for premix/readymix plaster 15mm thick on brick or concrete surfaces of walls in CM 1:4 finished even & smooth without using extra cement over a coat of ultratech seal and dry 5 plush as bonding agent including necessary scaffolding, framed work, seafty precuation up to six storey bldgs complete all as specified & directed.
M&L applying three coats of white wash on new plastered wall surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L for applying three coats of white wash on ceiling surfaces including preparation of new plastered surface complete all as specified and directed.
M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer including 3mm thick wall care putty complete all as specified & directed.
M&L complete removal of existing treatment on old wall/ ceiling surfaces and applying two or more coat approved shade and colour of plastic emulation paint RANGOLI EASY CLEAN from BERGER or ROYAL LUXURY from ASIAN PAINTS or impression Eco clean from Narolac over and including a coat of primer over 3mm thick wall care putty complete all as specified and directed
M&L for preparation of new surfaces of existing treatment and applying two coat of cement base paint wall surface including preparation of surfaces complete all as specified and directed.
M&L for preparation of old distempered on wall surfaces and applying one coats of distemper oil emulssion, white or tinted complete all as specified & directed.
M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of alkali-resistant primer paint and 3mm thick wall care putty all as specified & directed.
M&L applying one coat of white wash on old decorated wall surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L applying two coat of white wash on old decorated wall surfaces including preparation of surfaces by complete removal of existing surfaces brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L applying two coat of white wash on old decorated ceiling surfaces including preparation of surfaces by complete removal of existing surfaces brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greesy spots complete all as specified and directed.
M&L applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces by complete removal of existing surfaces complete all as specified and directed.
M&L applying two coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L applying two coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces by complete removal of existing surfaces complete all as specified and directed.
M&L applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed.
M&L for preparation of old surfaces by complete removal of existing treatment and applying two coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed.
M&L uprooting plants (girth n.exc 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth as directed. Note:-Work has to be executed in multi storey bldgs upto 25 Meter height
Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing, and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of latex with 4 part of water and 6 part of cement by weight, coverage of latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 Mpa, After this, providing 40 mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary Portland cement 43 grade and 2 part of Ghaggar sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10 mm thick plaster in Cement Mortar 1:4 with water proofing compound as per maufacture instructions cleaning and removing of waste material etc. all as specified & directed at site. (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building).
S&F welded steel wire fabric, n.exc 4 Kg weight per sqm, cut to length bent to shape required and fixing with and including annealed mild steel wire not less than (0.90 mm dia or fixing with galvanised steel staples or welding supplied and fixed complete to RCC, PCC,wood or steel members (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building) complete all as specified and directed.
Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(minimum), 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building) complete all as specified and directed.
Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(Minimum), 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building) complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.
Ditto as per item no 115 above here-in-before but 6 to 8 mm dia
M&L polymer modified cement bonding coat, prepared and applied on the concrete/masonry surface with 1 part of Sika latex with 4 part of water and 6 part of cement by weight. Coverage Sika latex 0.25 kg/sqm for one coat at all heights levels. Adhesive bond strength not less than 2.5 MPa. (Make :- Sika/BASE Fosroc/Dr Sunanda) including chipping of the loose concrete all as directed by Engineer-in-Charge.
M&L for laying Micro-concrete cement based pre packed single component, chloride free, sulphate free,non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete patch repair as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair also including necessary scaffolding, framed work, seafty precuation up to six storey bldgs complete all as specified & directed. Make:- Sika/BASE Fosroc/Dr Sunanda.
M&L for Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:2) for concealed water tubing etc as in brick walls exc 10 cm but not exc 20 cm girth complete all as specified and directed.
Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for including 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and as directed.
Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 500 litres but n.exc 1000 Litres capacity of tanks complete all as specified and as directed.
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, drains, culverts and walls etc but excluding ashlar facings, dressed stone work and pre cast concrete articles, built in cement mortar incl removing the unserviceable material out side the MOD land complete all as specified & directed.
M&L brick work with sub class 'B' bricks, straight or curved on plasn exc 6.00 m mean radius built in CM 1:6 complete all as specified.
M&L brick work with sub class 'B' bricks, straight or curved on plas to any radius in half brick thick built in CM 1:4 complete all as specified.
Dismantling of Stone slabs and tiles of any description or thickness in floors, approns, vertical surface of walls etc..
M&L for coloured granite( of any type and coloured) 18-20 mm thick table rubbed and polished as in Floor,cooking platform, and the like machine cut laid over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting, making hole of 20 mm dia for gas pipe at suitable location as directed at site and polishing complete.
..Ditto .. All as per item No 127 above but as in vertical surfaces such as dado/skirting laid over and including renderning 10 mm thick in CM 1:4 jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting and polishing complete.
M&L rounding to edges of stone slabs one edge such as steps, cooking platforms and other similar situations complete all as specified.
M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:4, 15 mm thick for laying floor finishes complete all as specified and directed.
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
All as per item Sl No 133 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified.
M&L for Vitrified ceramic floor tiles light shade 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
All as per item Sl No 135 above but as in skirting/dado etc over and including renderning 10 mm thick cement mortar 1:4 complete all as specified.
Supply only 25 to 32 mm dia decorative powder coated drapery rod in assorted sizes, colour as approved including a pair of end brackets/finials, fixed to masonary/ concrete walls as required. Note : The provision of finial/end cap shall be as per site requirement and as directed. The cost of end cap/finial shall be deemed included in the per running meter cost as per the size of door / window.
S&F incuding taking down powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter including ornamental aluminium grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge.
S&F incuding taking down Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainles steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 1.00 mtr in width Make of glass (MODI/FLOAT/ATUL).
S&F incuding taking down for aluminium anodized grill of bar size 6.25mm with square size 100mm fixed with suitable channel section complete all as specified & Directed.
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each (Except PVC chowkhats).
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each (Except PVC chowkhats).
Taking down PVC chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.
Taking down shutters of any description n.exc 1 sqm .
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each .
M&L for plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
M&L for MS flat iron as in hold fast, bands,straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates;hook and pintle hinges large hasps andstaples; chains, hand madesliding bolts; clamps; hold fasts; wall ties, hooks for hangingfans; plainangle cleats forsecsuring purlins to wood trusses orrafters; knee piece inserts; twoway and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 all as specified and directed.
M&L for PCC 1:2:4 type B-1 (20mm graded agg) as in anchorging hold fast, windows cills, jambs and similar work etc bed plate etc all as specified and directed.
M&L for 2nd class hard wood 35mm thick glazed and skelton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified and directed.
S&F for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter all as specified and directed.
S&F for 35mm thick plain framed, panelled shutter (two panell) 2nd class hard wood with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered partical board with commercial veneering both faces. The size of rail and stile as per IS : 1003 (part I), kinl seasoned and chamically pressure treated complete all as specified and as directed.
S&F for aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors all as specified.
S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications.Make :-Rajshree.
M&L for Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing.
S&F for factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.
S&F for factory made solid PVC door shutter 30mm thick (stiles),wire gauzed i.e. panel will be of wire gauzed in lieu of PVC sheet panel both side prelam. The wire gauzed shall be wrapped an additional square 8mm mild steel solid tube & this tube shall be welded to mild steel tubes. The wire gauzed shall be steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm fixed and strectched to tighten firmly and drawing on Sl Page 159 of SSR (Part - II) complete all as specified and directed.
Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work or beads etc.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.
M&L in repairs Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.
M&L for beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs.
S&F for aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified.
S&F for aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified.
S&F for aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified.
S&F for aluminium anodised sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy,complete all as specified.
S&F for aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy,complete all as specified.
S&F for stainless steel butt hinges of size 75mm fixed complete all as specified.
S&F for stainless steel butt hinges of size 100mm fixed complete all as specified.
S&F only 100 mm long MS butt hinges 'medium weight' cold rolled welded to steel frame work complete all as specified.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified.
S&F for 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified. .
S&F Aluminium handles,cast type, anodised 150 mm long, complete all as specified and directed.
S&F for brass Wardrobe hooks (single) of size 50mm to 60mm, fixed in repairs.
S&F 40mm dia, cup board knobs brass polished with nut, screw and washer complete all as specified.
S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm.
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.
S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples,
S&F for aluminium door seal upto 1200 mm long on bottom of door,
S&F in repairs Magic eye for main door complete all as specified
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0
M&L including taking down for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F including taking down door closer aluminium esxtruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
M&L for welding in repairs exc 2.5 cm but n. exc 5 cm in length, thickness of metal to be welded exc 6mm but not exc 9mm thick complete all as specified and as directed.
M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping and all as per specified and directed.
M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping and all as per specified and directed.
M&L for 18/19 mm thick PVC solid both side prelam celluca plyboard for cabinet boxes & shutter , cup boards, showcase etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.
M&L for 18 /19 mm thick block board, grade -2 quality, interior grade, commercial type fixed with screw to timber frame work as in CB shutter, shelves etc with 6 mm thick teak wood liping alround incl polishing to lipping all as per specified and directed.(fixed in repairs)
Dismantling ceiling boarding/wall paneling board any description, fixed in any position with screw and removing rubbish out of MoD land complete all as complete all as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and as directed.
S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.
S&F Glazing with 4 to 5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete .
S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane.
M&L for solar control film 50 micron reflective type sticked to glass pane as per instructions of manufacturers exceeding 1.5 sqm complete all as specified and as directed.
Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxid primer.
M&L for Treating ends of posts, back of chowkhats etc area tarred exceeding 0.1 Sq.m but not exceeding 0.5 Sq.m each including preparation of surfaces of wood and wood based material, steel and iron work and treated with tar or coal tar black paint.
Dismantling wrought iron or mild steel work of any description not otherwise provided for as in grills, framed railing etc.
M&L for Providing & injecting chemical emulsion at points of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same.
S&F easying and adjusting aluminium doors incl replacement of small articles like rubber gaskets , aluminum beads screws etc incl taking down and refixing in same opening.
S&F in repairs chromium plated/ stainless steel body mortice lock vertical type size 100 mm MS 4 lever
Cutting holes in brick wall built in CM for inserting hold fast and exc half brick but n.exc one brick including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-01 as required and match with extg shade of finish all as directed and specified in CA.
Supply only mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tracks or galvanised wire staple and complete .
S & F steel windows/ Ventilators confirming to IS-1038 of 1983, with side hung shutters including projecting type hinges with steel handles and peg stay complete with glazing bars dovetailed or welded complete all as specified.
S & F steel windows/ Ventilators confirming to IS-1038 of 1983 , with side hung shutters including projecting type hinges with steel handles and peg stay complete without glazing bars dovetailed or welded complete all as specified.
M&L for cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100 mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes 150 mm to 250 mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) complete all as specified and directed by the Engineer-in-Charge to maintain internal & external sewage system in functional state at all the time by engaging/deploying with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil. complete all as specified and directed by Engineer-in-charge. Note- 1. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide skilled tradesmen. 2. Contractor Proper records (date wise) of complaints received & rectified by the them and responsible to take care to complaint register, complaint slip from 9 AM to 5 PM per day other wise shall be penalised @ Rs.100/- per complaint if he fails to attend the complaint with in 6 hours as per complaint register which is kept in complaint cell. 3. Contractor arrengement skilled trademan, adiquate manpowers during execution of internal and external plumbing works including all safety precaution, scaffolding, standing pads, with all safety measures as per Govt guide linse and rules up to fourth storey of building. Rate shall be quoted accordingly, keeping in mind above said all provisions.
S&F including dismantling of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws to steel framed including necessary welding work complete all as specified and directed.
M&L cleaning sunken portion of slab (Bottom & sides) and providing water proofing treatment complete all as specified and directed as under :- (a) Providing min 3" concave coving with PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate admixed with WPC conplast WL . Cement slurry admixed with bonding compound Nitobond AR to be used for bonding of coving with RCC member. Covering CI pipes with PCC 1:2:4 type B-0 using 20mm graded stone aggregate admixed with integral WPC conplast WL (Fosroc Chemicals India Ltd). (b) Drilling 50mm deep holes at a distance of 1m c/c and cleaned with water and air, fixing nozzles of 12mm dia on drilled holes, injecting non shrink cement slurry at a pressure of 40 psi and nipples plugged with quick setting compounds. (c) Applying 2 full coats of brush bond acrylic emulsion based elastromeric water proofing coating after the primer with a min time gap of 4-6 hrs between 1st & 2nd coat. (d) Applying 15mm thick plaster in CM 1:4 admixed with WPC conplast WL after ponding test for a period for 72 hours of sunken floor . (e)GI tubing 40 mm dia of mrdium grade for spout of 150 Cm long for each sunken floor. Note :- Plastered surface area shall only be measured for the purpose of payment.
M&L for plane cement concrete 1:5:10 type B-2 using brick coarse aggregate (nominal mix ) as in sunken floor complete all as specified and directed.
S&F PFRC circular manhole/square/rectangular (medium duty) cover with frame of size n exc 0.50 sqm conforming to IS: 12592 and IS:1726, factory made complete all as directed and as approved by Engr-in-Charge
Supply only Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing
M&L for PCC 75 mm thick 1:3:6 type C-1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for PCC 40 mm thick 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.
Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. (fixed in repairs)
M&L for Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete.(fixed in repairs)
M&L for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.(fixed in repairs)
S&F , in repair, toughened corner glass shelf 6mm thick with brass chromium plated guard and fixing arrangements complete of size 300 mm complete all as specified and directed by Engr-in-charge of Make Jaguar Cat No CAN-1173
M& L for endura chequerd tiles of approved colour and design 10 to 12mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.(Make- Johnson endura tiles)
M&L for machine cut kota stone slab flooring 20-25mm thick over and including cement screed base 20mm thick screed bed in CM 1:4 laid and jointed with grey ement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone slab 20-25mm thick as in vetical surfaces over and including 10 mm thick cement plaster in CM 1:4 laid and jointed with grey ement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F in repair single level exposed shower mixer with provision of connection to exposed shower pipe (SHA-1211) with connecting legs and wall flange complete as wall mixer for mixing hot and cold water complete all as specified and directed of brass chromium plated of No ARI-39147 all as specified and directed.
M&L for 100 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in hard standing, paths, floor etc. finished rough surface without using extra cement complete complete all as specified.
Notes:- (a) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer, Manufacturer of Paints from Asian Paints/ Berger Paints/ Acro paints/ Snowcem paints/ Dulux Paint and their Applicators, for material and execution of Item of this BoQ(Except item No. (93 to 109) from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. Terms of the MOU so entered between tenderers, Applicators and Manufacturers mentioned above shall also cover the guarantee from manufacturer of paints for any defect in work executed by their applicator for a period of 5 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. (b) All rates will be inclusive of scaffolding arrangements up to fourth storey of buildings, trestles, ladders etc. complete.
A N BUILDERS
B S R Enterprises
Ex Serviceman Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .