Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹23.5 L+₹98,570 (4.38%)Rejected-AOC PO PS BUD BUD DISTT PURBA BURDWAN PIN 713403 | BUD BUD | PURBA BURDWAN | WEST BENGAL | 713403 | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹24.4 L+₹2.0 L (8.70%)Rejected-AOC 138A STANLEY PARK OTTUPATTARAI POST COONOOR 643 105 THE NILGIRIS TAMIL NADU | THE NILGIRIS | TAMIL NADU | 643105 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹27.9 L+₹5.4 L (24.0%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹29.9 L+₹7.5 L (33.2%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹45.0 L
EMD Value
₹90,100
Closing Date
30 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_600466_1
8400-984/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
Yes
GE PANAGARH
₹90,100
Yes
21 Jul 2023
2 Jun 2023
1 Jul 2023
2 Jun 2023
30 Jun 2023
16 Jun 2023
Amount
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the permises complete all as specified and directed.
M&L for Rendering 15mm thick in CM (1:4) using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished fair & even complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
M&L for Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall finsihed even and smooth with out using extra cement complete all as specified and directed.
M&L for Rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces of ceiling finished even and smooth with out using extra cement complete all as specified and directed
M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of cement base paint over a coat of acrylic/cement primer etc complete all as specified and as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for applying two coat of OBD on decorated or un-decorated plastered or unplastered surfaces of wall over a coat of wall primer after providing and applying wall care putty of 1 mm thickness and make the surface even and smooth by using sander machine over plastered surface to prepare the surface even and smooth complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed
Supply only liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
All as per item No 10.00 mentioned here-in-above but on ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying wall care putty where required and to make the surface even and smooth using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engr-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed. (Note : If 1mm thick wall care putty is required, the same shall be measured and paid separately) (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying wall care putty where required to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge and after preparing the surface smooth applying two coats of oil bound distemper (washable) over one coat of alkali resistant primer by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed. (Note : If 1mm thick wall care putty is required, the same shall be measured and paid separately) (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of old decorated surfaces (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying white cement based putty where required to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge, and after preparing the surface smooth applying one coat of oil bound distemper on the ceiling surfaces (washable) by using electric paint roller or roller brush, as per existing or as approved tint/colour complete all as specified and as directed. (Note : If 1mm thick wall care putty is required, the same shall be measured and paid separately) (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, washing down with water including applying white cement based putty where required for filling to depressions/nail holes/light cracks etc and to make surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with paint brush or roller brush, as per existing or as approved tint/colour complete all as specified and as directed.
Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall/pillars/cornices by vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying two coats of cement base paint with using paint brush or roller brush as per existing or as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge.
M&L for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as approved tint/colour, complete all as specified and as directed by Engineer-in-Charge. (Note : If 1mm thick wall care putty is required, the same shall be measured and paid separately) (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for preparation of old painted of wood and wooden based materials surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including steel staggings complete all as specified and directed.
M&L for preparation of old painted brick, stone, concrete and asbestos cement or plaster surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of surface of wall and applying 1mm thick wall care putty complete all as specified and as directed.
M&L for preparation of plaster surface of ceiling and applying 1mm thick wall care putty complete all as specified and as directed.
M & L for writing letters or figures (block, roman,italic or Indian ) not exc 30cm height with thick synthetic enamel paint of any shade complete all as specified and directed.
Removal of plants of girth exc 5.0 cm and n.exc 30 cm including root from RCC/Brick surfaces, porung of acid chemical over root are of concrete surface and making in CM 1:3 or PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) including all accessories to reach the area of plant growth in buildings etc complete all as specified and directed.
Demolition of RCC cement concrete (reinforcement cut as required to facilitate demolition) all as directed by Engr-in-Charge
S&F Mild Steel TMT bars 10 mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engr-in-Charge
All as per item No 26.00 mentioned here-in-above but 6 to 8mm dia complete all as specified & directed by Engr-in-Charge
Use and waste form work to chajja and similar work including edges complete all as specified & directed by Engr-in-Charge.
M&L for reinforced cement concrete(Nominal Mix) type A-0 (1:1.5:3) using 12.5 mm graded stone aggregate as in chajjas and similar work complete all as specified & directed by Engr-in-Charge.
M/S BHATTACHARJEE ENTERPRISE
SHREE JAYAM ENTERPRISES
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
RUBY BUILDERS AND CONSTRUCTION CO
BOSE BUILDERS AND ASSOCIATES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .